Vacuum Sensor (2006 Touareg V10)

   #1  

nightcasters

Verified VCDS-Lite User
Verified
Joined
Jul 9, 2018
Messages
25
Reaction score
3
Location
USA
VCDS Serial number
C?ID=341726
brakes went out and I went to check the vacuum hose which looks like it's okay but then I noticed a sensor was just floating around. pretty sure it's the sensor for the vacuum assist. I can't figure out where to put it back any ideas? 2006 Touareg V10
 
   #2  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
30,381
Reaction score
21,679
Location
USA
VCDS Serial number
HC100001
Question does not appear to be VCDS related in any way. Moving to General VW/Audi Repair.

-Uwe-
 
   #3  

nightcasters

Verified VCDS-Lite User
Verified
Joined
Jul 9, 2018
Messages
25
Reaction score
3
Location
USA
VCDS Serial number
C?ID=341726
Touareg V10 TDI vacuum assist line fails

the vacuum assist lines had cracked and the brakes went out causing near accidents three times already. The first two times the mechanic down the crack and replaced it. and it just happened again. they would have any suggestions on maybe replacing all the lines?
 
   #4  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
30,381
Reaction score
21,679
Location
USA
VCDS Serial number
HC100001
Threads merged. I don't think we need two separate threads regarding the same problem in the same vehicle.

-Uwe-
 
   #5  

HMC

Verified VCDS User
Verified
Joined
Jul 31, 2014
Messages
238
Reaction score
254
Location
UK
VCDS Serial number
C?ID=28246
Hi nightcasters,
The question I have is, were the previous repairs not replacements? if the servo hose was just repaired at the point of the crack, then the answer is yes the part should be replaced.
Regards HMC
 
  • Like
Reactions: Uwe
Top