Haldex gen 5 pinout (Golf mk7, A3 8V)

   #1  

mehhrib

Verified VCDS User
Verified
Joined
Aug 1, 2017
Messages
9
Reaction score
1
Location
Slovenia
VCDS Serial number
C?ID=258997
Hi,
I am looking for a pinout for Haldex controller for my Audi A3 8VA 2013 year 2.0tdi quattro. I have no communication with haldex controller, so there are DTCs in most systems + esp light and parking sensors not working (no Awd also).
There are 2 connectors, 1 for pump, the other one is for controller. 1 positive wire, 1 earth, 2x can, ans one more that I don’t know what it is for.
Anyone knows or has a pinout?
I would like to work on it on the bench..
Best regards,
Matic
 
   #3  

NZDubNurd

Verified VCDS User
Verified
Joined
Nov 10, 2014
Messages
1,125
Reaction score
1,680
Location
New Zealand
VCDS Serial number
C?ID=230482
You need to check a diagram, but the other wire is probably a brake signal - a backup for the haldex, if it doesn't receive the brake signal over CAN.

If you have no comms, you could have a power or wiring issue... but the module may be dead too - sometimes they get water in them.
 
  • Like
Reactions: Uwe
Top