MIB2 PQ Ignition Off Behavior

   #1  

325_guy

Verified VCDS User
Verified
Joined
Aug 2, 2019
Messages
18
Reaction score
7
Location
USA
VCDS Serial number
C?ID=135444
Good morning! Can somebody with the MIB 2 verify the system behavior when left powered on with power supplied, engine off?

I have one that I just applied the CP hardware patch to and in bench testing it, the radio powers off at about half an hour. It'll come right back on when pushing the power/volume knob.

Just wanted to make sure that the radio is performing as expected. The application of wires to the SMD pads on the motherboard proved to be a challenge.

Thanks!
 
   #2  

jyoung8607

FoRT
Verified
Joined
Feb 25, 2014
Messages
2,511
Reaction score
4,092
Location
Cincinnati, OH
VCDS Serial number
C?ID=25607
Good morning! Can somebody with the MIB 2 verify the system behavior when left powered on with power supplied, engine off?

I have one that I just applied the CP hardware patch to and in bench testing it, the radio powers off at about half an hour. It'll come right back on when pushing the power/volume knob.
I believe that's correct, I think that's what it does in my own car, a Mk7.5 Golf R with MIB2.5.

You could always simulate CAN ignition-on messages for it, if you have a need to fully verify outside a car.
 
   #4  

325_guy

Verified VCDS User
Verified
Joined
Aug 2, 2019
Messages
18
Reaction score
7
Location
USA
VCDS Serial number
C?ID=135444
You guys (and this forum!) are awesome! Thank you.
 
Top