Hello. I had to disassemble the rear brake calipers and after having reassembled them I carried out a scan with the vdcs and I get the following errors on block 03 ABS:
Wednesday,26,June,2019,22:55:17:54661
VCDS Version: Release 19.6.0 (x64) Running on Windows 10 x64
www.Ross-Tech.com
Address 03: ABS Brakes Labels: 5N0-614-109-V1.clb
Control Module Part Number: 5N0 614 109 CF HW: 5N0 614 109 CF
Component and/or Version: ESC-EBC460iV1 H10 0013
Software Coding: 22F124A14928E3702077440724C792C704365700508B4885
Work Shop Code: WSC 12345 123 12345
ASAM Dataset: EV_Brake1ESCEPBTRW 006353 (AU21)
ROD: EV_Brake1ESCEPBTRW_006.rod
VCID: 71C6878AA07C9FC76A-8024
4 Faults Found:
0383 - Brake Pressure Sensor 1
C107A 54 [137] - Missing Calibration / Basic Setting
MIL ON - Confirmed - Tested Since Memory Clear
0360 - Steering angle sensor
B1168 54 [137] - Missing Calibration / Basic Setting
MIL ON - Confirmed - Tested Since Memory Clear
0522 - Inertial Sensor Package
C115E 54 [137] - Missing Calibration / Basic Setting
MIL ON - Confirmed - Tested Since Memory Clear
0559 - No Basic Setting
B2010 00 [137] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 149
Mileage: 65339 km
Date: 2019.06.26
Time: 22:07:36
Additional_Codes: 00 00 00 0D 7D 1E 00 4A 0A
DTC: 00 02 2F
Additional2: 01 04 01 07 05 00 1C 00 1C 00
can anyone tell me how to recalibrate and eliminate these errors?
Thanks a lot!
Wednesday,26,June,2019,22:55:17:54661
VCDS Version: Release 19.6.0 (x64) Running on Windows 10 x64
www.Ross-Tech.com
Address 03: ABS Brakes Labels: 5N0-614-109-V1.clb
Control Module Part Number: 5N0 614 109 CF HW: 5N0 614 109 CF
Component and/or Version: ESC-EBC460iV1 H10 0013
Software Coding: 22F124A14928E3702077440724C792C704365700508B4885
Work Shop Code: WSC 12345 123 12345
ASAM Dataset: EV_Brake1ESCEPBTRW 006353 (AU21)
ROD: EV_Brake1ESCEPBTRW_006.rod
VCID: 71C6878AA07C9FC76A-8024
4 Faults Found:
0383 - Brake Pressure Sensor 1
C107A 54 [137] - Missing Calibration / Basic Setting
MIL ON - Confirmed - Tested Since Memory Clear
0360 - Steering angle sensor
B1168 54 [137] - Missing Calibration / Basic Setting
MIL ON - Confirmed - Tested Since Memory Clear
0522 - Inertial Sensor Package
C115E 54 [137] - Missing Calibration / Basic Setting
MIL ON - Confirmed - Tested Since Memory Clear
0559 - No Basic Setting
B2010 00 [137] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 149
Mileage: 65339 km
Date: 2019.06.26
Time: 22:07:36
Additional_Codes: 00 00 00 0D 7D 1E 00 4A 0A
DTC: 00 02 2F
Additional2: 01 04 01 07 05 00 1C 00 1C 00
can anyone tell me how to recalibrate and eliminate these errors?
Thanks a lot!