Volkswagen/Audi "Standardized" Measuring Block Groups for Gasoline Engines

Status
Not open for further replies.
   #1  

Jef

Ross-Tech Employee
Staff member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
3,952
Reaction score
6,335
Location
HQ
https://www.ross-tech.com/vag-com/m_blocks/

A hidden gem of info on our web site for measuring block data on gas engines from 2000-ish to 2010-ish.

This info only applies to non-UDS control modules.

This is also a good time to point out, VCDS only sends a request and shows the response. Different control modules are engineered/designed differently so you can come across variations of data. The listing there will have different versions of info for a given group number. Example:

https://www.ross-tech.com/vag-com/m_blocks/090-098.html

There are 3 variations of group 090, and then 2 variations of groups 091, 092, 093, 094, 095 and 096. Which version your car might have depends on how the Germans designed that specific control module... VCDS just sends a request to view data in group XXX and shows you the response.
 
Last edited:
Status
Not open for further replies.
Back
Top