Help! Can’t recode abs with vcds lite

   #1  

RunsDeep

Verified VCDS-Lite User
Verified
Joined
Apr 16, 2019
Messages
3
Reaction score
1
Location
USA
VCDS Serial number
C?ID=367120
Help! Can’t Recode ABS with VCDS Lite

Code:
Chassis Type: 4B - Audi A6 C5
Scan: 01,02,03,06,08,15,16,17,18,22,34,35,36,37,45,55,56,57,65,67,75,76,77
 
-------------------------------------------------------------------------------
Address 01: Engine       Labels: None
   Controller: 4D0 907 560 CE
   Component: 4.2L V8/5V      G   0002
   Coding: 07752
   Shop #: WSC 02325
   VCID: 6BA94FB00A9D
   WAUML64B62N148552     AUZ7Z0B2121682
No fault code found.
Readiness: 0110 1101

-------------------------------------------------------------------------------
Address 02: Auto Trans       Labels: 01L-927-156.LBL
   Controller: 4D0 927 156 EA
   Component: AG5 01L 4.2l5V  RdW 1010
   Coding: 00001
   Shop #: WSC 02314
   VCID: 6CAB4CAC0F93
No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes       Labels: 4B0-614-517.LBL
   Controller: 4B0 614 517 R
   Component: ABS/ESP allrad      2330
   Coding: 06397
   Shop #: WSC 12345
   VCID: 301398DCE33B
1 Fault Found:
01486 -  System Function Test Activated
            35-00 -   -

-------------------------------------------------------------------------------
Address 06: Seat Mem. Pass       Labels: None
   Controller: 4B0 959 760 C
   Component: Sitzmemory R1 BF    0103
   Coding: 00003
   Shop #: WSC 00000
   VCID: 2D2D81A8F409
No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC       Labels: 4B0-820-043-MY1.LBL
   Controller: 4B0 820 043 AD
   Component: A6-Klimavollautomat 0105
   Coding: 00010
   Shop #: WSC 02325
   VCID: 5CCB1C6CDF33
5 Faults Found:
01810 -  Actuating Motor for Temperature Flap; Right (V159)
            41-10 -  Blocked or No Voltage - Intermittent
00716 -  Air recirculation Flap Positioning Motor (V113)
            41-10 -  Blocked or No Voltage - Intermittent
01592 -  Air Quality Sensor (G238)
            57-10 -  Electric Circuit Failure - Intermittent
01317 -  Control Module in Instrument Cluster (J285)
            49-10 -  No Communications - Intermittent
01314 -  Engine Control Module
            49-10 -  No Communications - Intermittent

-------------------------------------------------------------------------------
Address 15: Airbags       Labels: 4B0-959-655-AI7.LBL
   Controller: 4B0 959 655 N
   Component: Airbag 8.4E         5001
   Coding: 0000305
   Shop #: WSC 02325
   VCID: 3B09BFF03A7D
No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel       Labels: 4B0-907-487.LBL
   Controller: 4B0 907 487 H
   Component: Lenkradelektronik   D01 
   Coding: 01015
   Shop #: WSC 02325
   VCID: 31159DD8E831
No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments       Labels: 4B0-920-xxx-17.LBL
   Controller: 4B0 920 981 P
   Component: KOMBI+WEGFAHRS. VDO D11
   Coding: 03283
   Shop #: WSC 19411
   VCID: 331997D0122D
   WAUML64B62N148552     AUZ7Z0B2121682
4 Faults Found:
01176 -  Key
            07-10 -  Signal too Low - Intermittent
00849 -  S-contact at Ignition/Starter Switch (D)
            31-10 -  Open or Short to Ground - Intermittent
01314 -  Engine Control Module
            49-10 -  No Communications - Intermittent
01315 -  Transmission Control Module
            49-10 -  No Communications - Intermittent

-------------------------------------------------------------------------------
Address 35: Centr. Locks       Labels: 4B0-962-258.LBL
   Controller: 4B0 962 258 J
   Component: Central Lock/Alarm  D35
   Coding: 15885
   Shop #: WSC 02325
   VCID: 301398DCE33B
9 Faults Found:
01366 -  Opened Due to Crash Signal
            35-00 -   -
01371 -  Alarm triggered by Door Contact Switch; Driver's Side
            35-00 -   -
01572 -  Alarm triggered by Door Contact Switch; Passenger Side
            35-00 -   -
01374 -  Alarm triggered by Terminal 15
            35-00 -   -
01370 -  Alarm triggered by Interior Monitoring
            35-00 -   -
01368 -  Alarm triggered by Luggage Compartment Switch
            35-00 -   -
00955 -  Key 1
            09-10 -  Adaptation Limit Surpassed - Intermittent
00956 -  Key 2
            09-10 -  Adaptation Limit Surpassed - Intermittent
01573 -  Alarm triggered by Door Contact Switch; Left Rear
            35-00 -   -

-------------------------------------------------------------------------------
Address 36: Seat Mem. Drvr       Labels: None
   Controller: 4B0 959 760 B
   Component: Sitzmemory R1 F     0102
   Coding: 00001
   Shop #: WSC 00000
   VCID: 2C2B8CACCF13
No fault code found.

-------------------------------------------------------------------------------
Address 45: Inter. Monitor       Labels: None
   Controller: 4B0 951 178 A
   Component: Innenraumueberw.    D04
   Coding: 00101
   Shop #: WSC 02325
   VCID: 263F7E84D1FF
1 Fault Found:
01377 -  Ultra Sonic Sensor for Alarm System; Left (G170)
            27-00 -  Implausible Signal

-------------------------------------------------------------------------------
Address 55: Xenon Range       Labels: 4Z7-907-357.LBL
   Controller: 4Z7 907 357 
   Component: dynamische LWR       D07
   Coding: 00050
   Shop #: WSC 02325
   VCID: 047B040C0703
No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio       Labels: 8D0-035-1xx-56.LBL
   Controller: 4B0 035 195 J
   Component: symphony II NP2    0050 
   Coding: 00225
   Shop #: WSC 00000
   VCID: 27217380D6F5
No fault code found.

-------------------------------------------------------------------------------
Address 75: Telematics       Labels: None
   Controller: 8E0 035 616 
   Component: Telematik USA1    
   Coding: 0002303
   Shop #: WSC 02325
   VCID: E2B7A2947D57
2 Faults Found:
01528 -  Auxiliary Antenna for Telematic (R90)
            004 -  No Signal/Communication - Intermittent
00003 -  Control Module
            014 -  Defective - Intermittent

-------------------------------------------------------------------------------
Address 76: Park Assist       Labels: 8Z0-919-283.LBL
   Controller: 8Z0 919 283 
   Component: Parkingsyst. A6 USA D08
   Coding: 01166
   Shop #: WSC 02325
   VCID: 027702141D17
1 Fault Found:
01547 -  Sensor for Parking Aid; Rear Mid-Right (G205)
            31-00 -  Open or Short to Ground

End   --------------------------------------------------------------------------------------------------
Hi - trying to code my abs as per Ross tech procedure but can’t get past the last necessary step of calibrating the steering angle sensor

- after coding & clearing any dtc’s when I open up basic settings 001 it doesn’t let me press “Go!” To activate the calibration -

I have tried many times, any help would be greatly appreciated- Thanks!!!

 
Last edited:
   #2  

Zenerdiode

Verified VCDS User
Verified
Joined
Jun 26, 2014
Messages
1,007
Reaction score
1,559
Location
Newcastle, England
VCDS Serial number
C?ID=24330
- after coding & clearing any dtc’s when I open up basic settings 001 it doesn’t let me press “Go!”
Because that BS Group is already selected and running. If you place your cursor in the TextBox with '001' in it; clear out the 001, re-enter it, the [Go!] button will now be Enabled to run BS on that group.
 
  • Like
Reactions: Uwe
   #3  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
29,498
Reaction score
21,053
Location
USA
VCDS Serial number
HC100001
Because that BS Group is already selected and running. If you place your cursor in the TextBox with '001' in it; clear out the 001, re-enter it, the [Go!] button will now be Enabled to run BS on that group.
Yup, looks like the last button he clicked was [Up], which implicitly does a [Go!] on the next group.

The fact that field 3 shows "OK" also means it did the Basic Setting successfully. The scan also shows a Coding: 06397, so I'm not sure I understand what the problem is, other than he needs to carry out the System Function Test.

-Uwe-
 
   #4  

RunsDeep

Verified VCDS-Lite User
Verified
Joined
Apr 16, 2019
Messages
3
Reaction score
1
Location
USA
VCDS Serial number
C?ID=367120
Thanks for all your help, performed system function test and all lights went away and abs is now successfully coded

it was confusing as I was under the impression it would run some sort of test that took a few seconds. It should be noted that all you really have to do is go to 001 in basic functions - & it doesn’t matter how you get there

(pressing go is only necessary if you type 001 in the box; as just pressing the arrow up to one does the same exact thing) ... now to bleed the abs pump :0)
 
Last edited:
  • Like
Reactions: Uwe
Top