How to do Basic Settings for 7-speed S-Tronic DQ381 (0GC) A3 2017 1.8TFSI Quattro?

   #1  

spacebar

Verified VCDS User
Verified
Joined
Nov 24, 2018
Messages
7
Reaction score
0
Location
Norway
VCDS Serial number
C?ID=351732
Hi.

I'm not 100% sure the correct steps to do a basic settings for a 7-speed DQ381 (0GC) transmission. In the wiki there are a few different ways of doing this, but I cant find any for my DQ381. I'm having trouble with judder/clutch hogging and late response issues in 1, 2 and 3 shift. It is very random and hard to replicate for the dealer/service. The car has been like this since
new (18 months).

Could someone help me? And do you recommend doing some more resets etc?

I've attached a full scan below.

Code:
Friday,23,November,2018,18:22:45:00116
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 18.9.0.2 (x64)  HEX-V2 CB: 0.4436.4
Data version: 20180927 DS296.0
www.Ross-Tech.com


VIN: WAUZZZ8V0H10XXXXX   License Plate: 
Mileage: 11753km-7302mi   Repair Order: 



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 8V-AU37 (3Q0)
Scan: 01 02 03 05 08 09 10 13 14 15 16 17 19 20 22 2B 42 44 52 55
          5F 6C BB BC

VIN: WAUZZZ8V0H10XXXXX   Mileage: 11753km-7302miles

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
13-Auto Dist. Reg -- Status: OK 0000
14-Susp. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
20-High Beam Assist. -- Status: OK 0000
22-AWD -- Status: OK 0000
2B-Steer. Col. Lock -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
5F-Information Electr. -- Status: OK 0000
6C-Back-up Cam. -- Status: OK 0000
BB-Door Rear Drv -- Status: OK 0000
BC-Door Rear Pass -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CZPB)       Labels:. 06L-907-115-V1.clb
   Part No SW: 8V0 907 115 C    HW: 06L 907 309 B
   Component: 2.0 R4 TFSI   H31 0002  
   Revision: 1DH31000    
   Coding: 022500122466010B34000000000000000000000000000000
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_ECM20TFS0118V0907115C 001004
   ROD: EV_ECM20TFS0118V0907115C.rod
   VCID: 38292AEAD2D38C87665-806C

No fault code found.
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 02: Auto Trans (J743)       Labels:. 0BH-927-711.clb
   Part No SW: 0GC 300 011 R    HW: 0GC 927 711 G
   Component: GSG DQ381     H06 0703  
   Revision: 00H06V07    
   Coding: 0014
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_TCMDQ381061 001
   ROD: EV_TCMDQ381061.rod
   VCID: 313F17CE31A95DCF21B-8064

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 5Q0-907-379-IPB-V1.clb
   Part No SW: 5Q0 614 517 CF    HW: 5Q0 614 517 AD
   Component: ESC           H25 0513  
   Revision: 00000000    Serial number: 60087000000663
   Coding: 13F16AA23426126C8B780F0940CC28C8562C48D1F0021475184150F48208420000000012121212B835351919323200
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_Brake1UDSContiMK100IPB 036010
   ROD: EV_Brake1UDSContiMK100IPB_036_VW41.rod
   VCID: 77ABE9D69F4D43FFAFF-8022

No fault code found.

-------------------------------------------------------------------------------
Address 05: Acc/Start Auth. (J518)       Labels:| 5Q0-959-435.clb
   Part No SW: 5Q0 959 435 B    HW: 5Q0 959 435 
   Component: VWKESSYMQB    021 0710  
   Revision: 00021000    Serial number: 0430250577
   Coding: 030C1C
   Shop #: WSC 12345 123 61029
   ASAM Dataset: EV_KessyHellaMQBAB 002019
   ROD: EV_KessyHellaMQBAB_002.rod
   VCID: 3B2335E6E3E5A79F8B7-806E

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (E87)       Labels:| 8V0-820-043.clb
   Part No SW: 8V0 820 043 Q    HW: 8V0 820 043 Q
   Component: AC Automat    H03 0130  
   Revision: 20002000    Serial number: 00000001152803
   Coding: 03000004000000011000000000001100
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_AirCondiFrontVaAU37X 008022
   ROD: EV_AirCondiFrontVaAU37X.rod
   VCID: 40D9420A8A03C447DE5-8014

   Relative humidity sensor in fresh air intake duct: 
   Subsystem 1 - Part No SW: 4H0 907 658 B    HW: 4H0 907 658 B
   Component: AQ_Hum_Sensor  H01 0006 
   Serial number: E7098F8800PAG0MUFU03

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:. 5Q0-937-08X-V2.clb
   Part No SW: 5Q0 937 084 CF    HW: 5Q0 937 084 CF
   Component: BCM MQBAB M+  H34 0236  
   Serial number: 02001702503798
   Coding: 000000000000000000000000000000000000000000000000000000000000
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_BCMMQB 017001
   ROD: EV_BCMBOSCH_017.rod
   VCID: 7EA5FCF2B07772B7EC9-802A

   Control Unit For Wiper Motor: 
   Subsystem 1 - Part No SW: 8V1 955 119 C    HW: 8V1 955 119 A  Labels: 5QX-955-119-V1.CLB
   Component: WWS371 161213  043 0585 
   Serial number:         161222080923
   Coding: 0A47F7

   Rain Light Recognition Sensor: 
   Subsystem 2 - Part No SW: 8U0 955 559 C    HW: 8U0 955 559 B  Labels: 8U0-955-559.CLB
   Component: G397_RLFS  H06 0004 
   Serial number: 62605578            
   Coding: 00006C

   Light switch: 
   Subsystem 3 - Part No SW: 8V0 941 531 AR    HW: 8V0 941 531 AR
   Component: E1 - LDS MQB  H06 0032 
   Serial number: 13 11 2016  00000283

No fault code found.

-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels:| 5Q0-919-294.clb
   Part No SW: 5QA 919 294 A    HW: 5QA 919 294 
   Component: PDC 8 KanalH07 0038  
   Serial number: 000308418617025
   Coding: 0470151011
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_EPHVA18AU3700000 009031
   ROD: EV_EPHVA18AU3700000_009_VW37.rod
   VCID: 4ACD6022BC3F0E17001-801E

No fault code found.

-------------------------------------------------------------------------------
Address 13: Auto Dist. Reg (J428)       Labels:| 3Q0-907-572.clb
   Part No SW: 5Q0 907 572 G    HW: 5Q0 907 572 G
   Component: ACC BOSCH MQB H10 0571  
   Coding: 3500E78259FF8728949C8055000026
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_ACCBOSCHVW416 001005
   ROD: EV_ACCBOSCHVW416_001_VW37.rod
   VCID: 3B2335E6E3E5A79F8B7-806E

No fault code found.

-------------------------------------------------------------------------------
Address 14: Susp. Elect. (J250)       Labels: 8V0-907-376.clb
   Part No SW: 8V0 907 376 G    HW: 8V0 907 376 F
   Component: DAEMPFUNGS-SG H11 0082  
   Serial number:       291116068
   ASAM Dataset: EV_AudiMagneRide 002008
   ROD: EV_AudiMagneRide.rod
   VCID: 45D7531E9521E16FED3-8010

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5Q0-959-655.clb
   Part No SW: 5Q0 959 655 AR    HW: 5Q0 959 655 AR
   Component: AirbagVW21    003 0317  
   Serial number: 003TDR2M4T88
   Coding: 98CCC0000C0000005C5400CA004800000065
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_AirbaVW20SMEVW37X 002154
   ROD: EV_AirbaVW20SMEVW37X.rod
   VCID: 1079B24A9AE374C70E5-8044

   Belt Pretensioner left: 
   Subsystem 1 - Part No SW: 5G0 980 945 B    HW: 5G0 980 945 B
   Component: BeltPretRevFL  H37 0350 
   Serial number: 34120583D26011790530
   Coding: 333135

   Belt Pretensioner right: 
   Subsystem 2 - Part No SW: 5G0 980 946 B    HW: 5G0 980 946 B
   Component: BeltPretRevFR  H37 0350 
   Serial number: 34120584D26011780705
   Coding: 333135

   Side Sensor Driver Front: 
   Subsystem 3 - Part No SW: -----------    HW: 480 000 802 17
   Component: SideSensor_Df  001 0887 
   Serial number: 357000000000088D912D
   Coding: 2D2D2D

   Side Sensor Passenger Front: 
   Subsystem 4 - Part No SW: -----------    HW: 480 000 802 17
   Component: SideSensor_Pf  001 0887 
   Serial number: 35800000000890640123
   Coding: 2D2D2D

   Side Sensor Driver Rear: 
   Subsystem 5 - Part No SW: -----------    HW: 480 402 301 17
   Component: SideSensor_Dr  000 6149 
   Serial number: 3510001BD248E89306BD
   Coding: 2D2D2D

   Side Sensor Passenger Rear: 
   Subsystem 6 - Part No SW: -----------    HW: 480 402 301 17
   Component: SideSensor_Pr  000 6149 
   Serial number: 3520001B1237EE23718+
   Coding: 2D2D2D

   Front Sensor Driver: 
   Subsystem 7 - Part No SW: -----------    HW: 480 401 512 16
   Component: FrontSensor_D  001 6149 
   Serial number: 3550002B123C4E30321S
   Coding: 2D2D2D

   Pedestrian Protection Driver: 
   Subsystem 8 - Part No SW: -----------    HW: 480 402 101 17
   Component: PedP_Sensor_D  000 6149 
   Serial number: 2280001A1246A8E51682
   Coding: 2D2D2D

   Pedestrian Protection Passenger: 
   Subsystem 9 - Part No SW: -----------    HW: 480 402 101 17
   Component: PedP_Sensor_P  000 6149 
   Serial number: 2290001A1246A8E36181
   Coding: 2D2D2D

   Pedestrian Protection Driver 2: 
   Subsystem 10 - Part No SW: -----------    HW: 480 001 901 17
   Component: PedPSensor_D2  001 0887 
   Serial number: I0M0000000082945CF1A
   Coding: 2D2D2D

   Pedestrian Protection Passenger 2: 
   Subsystem 11 - Part No SW: -----------    HW: 480 001 901 17
   Component: PedPSensor_P2  001 0887 
   Serial number: I0N0000000003945CF14
   Coding: 2D2D2D

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel (J527)       Labels:| 5Q0-953-549.clb
   Part No SW: 8V0 953 521 KM    HW: 5Q0 953 549 E
   Component: Lenks. Modul  003 0140  
   Revision: --------    Serial number: 03021704400745
   Coding: E018
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_SMLSKLOMQB 020002
   ROD: EV_SMLSKLOMQB_020_AU37.rod
   VCID: 0F7BB13687DD6B3F17F-805A

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5G0-920-XXX-17.clb-SRI2
   Part No SW: 8V0 920 790     HW: 8V0 920 790 
   Component: FBenRDW       H14 0046  
   Coding: 048418503F8000080185E8001000000000000000
   Shop #: WSC 12345 123 61029
   ASAM Dataset: EV_DashBoardFPKAU37X 001023
   ROD: EV_DashBoardFPKAU37X.rod
   VCID: 79AFEFEEA959558FD9B-802C

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:| 3Q0-907-530-V1.clb
   Part No SW: 3Q0 907 530 C    HW: 3Q0 907 530 C
   Component: GW MQB High   515 5286  
   Serial number: 06021710802260
   Coding: 030100043F085A005B00025C9C0B00000001010000000000000000000000
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_GatewNF 013020
   ROD: EV_GatewNF_VW37.rod
   VCID: 2F3B11B6279D4B3F37F-807A

   Alternator: 

   Multi Function Steering Wheel Control Module: 
   Subsystem 2 - Part No SW: 8W0 951 523 E    HW: 8W0 951 523 E
   Component: J453 MFL  H04 0002 
   Serial number: 20170126205846 22685

   Battery Monitoring Control Module: 
   Subsystem 3 - Part No SW: 5Q0 915 181 J    HW: 5Q0 915 181 J
   Component: J367-BDMConti  H03 1050 
   Serial number: 75410803001702052549

No fault code found.

-------------------------------------------------------------------------------
Address 20: High Beam Assist. (J844)       Labels:* None
   Part No SW: 81A 857 511 G    HW: 81A 857 511 A
   Component: FLA           H10 0005  
   Revision: AA001001    
   Coding: 0404000700000000010000
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_HighBeamAssisMXBAU33X 001003
   ROD: EV_HighBeamAssisMXBAU33X.rod
   VCID: 2C0106BA168B302712D-8078

No fault code found.

-------------------------------------------------------------------------------
Address 22: AWD (J492)       Labels:* 0CQ-907-554.clb
   Part No SW: 0CQ 907 554 H    HW: 0CQ 525 130 
   Component: Haldex4Motion H52 7083  
   Serial number: HA1-00012.01.17
   Coding: 0001
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_AllWheelContrHA1VW37X 004013
   ROD: EV_AllWheelContrHA1VW37X_004.rod
   VCID: 4ACD6022BC3F0E17001-801E

No fault code found.

-------------------------------------------------------------------------------
Address 2B: Steer. Col. Lock (J764)       Labels:* 5Q0-905-861.clb
   Part No SW: 5Q0 905 861 A    HW: 5Q0 905 861 A
   Component: ELV-MQBA      H01 0120  
   Revision: 00000000    Serial number: 17000012657003
   Coding: 5D00000000000000
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_ELVMarquMQB 004111
   ROD: EV_ELVMarquMQB.rod
   VCID: 34311EDACEBB68E74AD-8060

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386)       Labels:| 5QX-959-X93-42.clb
   Part No SW: 5Q0 959 593 E    HW: 5Q0 959 593 B
   Component: TSG FS        020 0041  
   Serial number: 221016EJL09914
   Coding: 001C9B205C00048000001003
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_DCUDriveSideEWMAXKLO 006003
   ROD: EV_DCUDriveSideEWMAXCONT.rod
   VCID: 43D34D069B15DF5FC37-8016

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist (J500)       Labels:| 5Q0-909-144.clb
   Part No SW: 5Q0 909 144 T    HW: 5Q0 909 144 R
   Component: EPS_MQB_ZFLS  129 1072  
   Coding: 8107
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_SteerAssisMQB 013144
   ROD: EV_SteerAssisMQB_013.rod
   VCID: 45D7531E9521E16FED3-8010

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387)       Labels:| 5QX-959-X92-52.clb
   Part No SW: 5Q0 959 592 E    HW: 5Q0 959 592 B
   Component: TSG BFS       020 0041  
   Serial number: 190117EAJ11886
   Coding: 001C93205E00048000001003
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_DCUPasseSideEWMAXKLO 006003
   ROD: EV_DCUPasseSideEWMAXCONT.rod
   VCID: 42DD4802840FD657C81-8016

No fault code found.

-------------------------------------------------------------------------------
Address 55: Headlight Range (J745)       Labels:* None
   Part No SW: 8V0 907 357 A    HW: 7P6 907 357 B
   Component: MxB-ECU       001 0230  
   Revision: --------    Serial number: --------------
   Coding: 0EE202202B130200
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_HeadlRegulAUDIMXBAU64X 005014
   ROD: EV_HeadlRegulAUDIMXBAU64X_005_AU37.rod
   VCID: 3E253CF2F0F7B2B7AC9-806A

No fault code found.

-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels:* None
   Part No SW: 8V1 035 035 A    HW: 8V1 035 035 
   Component: MU-P-LND-EU   053 0875  
   Serial number: A698A0H2517001
   Coding: 01730101FF0A000011111101000A00332F002BE501700100DE
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_MUHig6C3Gen2HBAS 001115
   ROD: EV_MUHig6C3Gen2HBAS_AU37.rod
   VCID: 303912CA3AA354C72E5-8064

   Data medium: 
   Subsystem 1 - Part No SW: V03 959 801 FC    HW: -----------
   Component: ECE 2017  --- 0157 
   Serial number: --------------------

   Display unit 1 for multimedia system: 
   Subsystem 2 - Part No SW: 8V0 919 604 C    HW: 8V0 919 604 C
   Component: DU High  H49 0014 
   Serial number: AUZ8Z9G1Y00HFC      

   Multimedia Operating Unit: 
   Subsystem 3 - Part No SW: 8V0 919 614 BK    HW: 8V0 919 614 BK
   Component: ControlUnit_H  H85 0855 
   Serial number: ALJAL116121600010672

   Compact Disc Database: 
   Subsystem 4 - Part No SW: V03 959 800 EG    HW: -----------
   Component: Gracenote2  --- 1015 
   Serial number: --------------------

No fault code found.

-------------------------------------------------------------------------------
Address 6C: Back-up Cam. (J772)       Labels:| 5Q0-980-556.clb
   Part No SW: 5Q0 980 556 B    HW: 5Q0 980 556 B
   Component: RVC Compact   H12 0231  
   Coding: 0273010102002001400040
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_CamSysRVRVCPANAMQBAB 006009
   ROD: EV_CamSysRVRVCPANAMQBAB_006_VW37.rod
   VCID: 392F2FEEE9D9958F99B-806C

No fault code found.

-------------------------------------------------------------------------------
Address BB: Door Rear Drv (J388)       Labels:* None
   Part No SW: 5Q0 959 595 E    HW: 5Q0 959 595 B
   Component: TSG HFS       020 0041  
   Serial number: 291216ELN19535
   Coding: 000C93204000048000001002
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_DCURearDriveMAXKLO 006003
   ROD: EV_DCURearDriveMAXCONT.rod
   VCID: 45D7531E9521E16FED3-8010

No fault code found.

-------------------------------------------------------------------------------
Address BC: Door Rear Pass (J389)       Labels:* None
   Part No SW: 5Q0 959 595 E    HW: 5Q0 959 595 B
   Component: TSG HBFS      020 0041  
   Serial number: 291216ELN19538
   Coding: 000C93204000048000001002
   Shop #: WSC 06385 790 00016
   ASAM Dataset: EV_DCURearPasseMAXKLO 006003
   ROD: EV_DCURearPasseMAXCONT.rod
   VCID: 45D7531E9521E16FED3-8010

No fault code found.

End----(Elapsed Time: 01:41, VBatt start/end: 11.9V/11.9V. VIgn 11.8V)-----
 
Last edited:
   #2  

DrPeter

Ross-Tech Employee
Joined
Jan 29, 2014
Messages
1,375
Reaction score
2,616
Location
16.4905° S, 151.7375° W
Hello, you could try this procedure:

0BH - Basic Settings
- Standstill Adaptation procedure for UDS Controllers


Prerequisites:
- Transmission fluid temperature greater than 15°C
- Do NOT continue if the temp is out of specs! -
- Advanced Measuring Values = [Control Module temperature]
- Selector lever in [P]
- Engine idle speed, do not press accelerator pedal
- Parking brake and foot brake applied during the entire procedure

- Note: Not all transmission controllers support this function



0BH - Basic Settings Procedure

- Be sure all the Prerequisites are followed, important! - The brake pedal must be depressed during the entire procedure.

[Select]
[02 - Transmission]

[Basic Settings - UDS]
- Select [Basic settings of transmission]

Next click [Show Measuring Data] and select:
- [Engine speed]
- [Main status of abort code basic setting]
- [Status of basic setting]
- [Status of basic setting data for clutch]
- [Status of basic setting data; gear selector]
- [Sub-status of abort code basic setting]


Then press [Go!]

- During the basic setting procedure, there maybe some loud gear shifting noises from the transmission, this is normal.

Basic settings may not complete successfully if:
- The fluid temperature gets too hot.
- Brake is released


Once complete, there should be an indication of this in the [Status of Basic Settings].

Then click - [Done, Go Back] and Check for fault codes.

Hope this helps and please let us know how this works for you!

drpeter
 
   #3  

spacebar

Verified VCDS User
Verified
Joined
Nov 24, 2018
Messages
7
Reaction score
0
Location
Norway
VCDS Serial number
C?ID=351732
Hi, and thanks for the instructions.

I did the basic settings and it went OK. No errors or fault codes.

However I believe I need to drive the car for some time so the adaptive stuff is done and complete.

I still can feel the shifting between 2 and 3 gear like before. I just hope it will be smoother over time. It’s worse on downshift, more noticeable like before.

But can I do some more basic settings to fix this? More options to reset?
What does this “Start double clutch fast adaptation” do?
 
   #4  

spacebar

Verified VCDS User
Verified
Joined
Nov 24, 2018
Messages
7
Reaction score
0
Location
Norway
VCDS Serial number
C?ID=351732
Hmm... not enable to edit my previous post.
Another thing, I’m experiencing some slight delay from when I press the throttle and the car starts to accelerate. It’s like 1 second and I feel when the clutch is releasing if that makes sense.

Would a throttle body alignment (TBA) help?

Thanks.
 
   #5  

DrPeter

Ross-Tech Employee
Joined
Jan 29, 2014
Messages
1,375
Reaction score
2,616
Location
16.4905° S, 151.7375° W
Hello,

What does this “Start double clutch fast adaptation” do?
- Unknown, sorry we do not have any information as to exactly what many of the Basic Settings and Adaptations do. Sometime we can find information and procedures when they are mentioned in technical documents, repair manuals and factory test plans. Other than that we do not have any more information, you can contact the manufacture to see if they can help, since they did design the vehicle. ;)

With that said, we do not have anymore information about any "more basic settings" or "more options to reset", perhaps there is something internally wrong with the transmission or check for any software updates with the transmission.

.. You could try and perform a TBA with VCDS in the [01-Engine] controller, it would not hurt.


drpeter
 
   #6  

spacebar

Verified VCDS User
Verified
Joined
Nov 24, 2018
Messages
7
Reaction score
0
Location
Norway
VCDS Serial number
C?ID=351732
Thanks for the information.

I’ve been asking my dealer about software updates for a year, but nothing. I am also talking to a company who optimise the TCU software and hopefully they can solve it. It cost a lot of money so I’m not sure yet.

But I will try to do a TBA. I guess this is the correct page with instructions and UDS for my car.

Code:
http://wiki.ross-tech.com/wiki/index.php/Throttle_Body_Alignment_(TBA)
 
Last edited:
   #7  

Jack@European_Parts

NostraJackAss
Joined
Jan 29, 2014
Messages
20,182
Reaction score
8,677
Location
Montgomery, NY, USA
VCDS Serial number
C?ID=57337
Address 02: Auto Trans (J743) Labels:. 0BH-927-711.clb
Part No SW: 0GC 300 011 R HW: 0GC 927 711 G
Component: GSG DQ381 H06 0703 All Indexes compatible Firmware update needed?
 
Last edited:
   #8  

Mr. M

Verified VCDS User
Verified
Joined
May 28, 2017
Messages
79
Reaction score
82
Location
Leicestershire, UK
VCDS Serial number
C?ID=256600
Another thing, I’m experiencing some slight delay from when I press the throttle and the car starts to accelerate. It’s like 1 second and I feel when the clutch is releasing if that makes sense.
CZPB is one of the new "Budack" cycle engines. I have one of these mated to a manual transmission, and pulling away from a standstill (and driveability in general) is interesting to say the least. I took mine back to the dealer to complain about the hesitation when pulling away and they told me to use more throttle :mad: Could this be what you are experiencing?
 
   #9  

spacebar

Verified VCDS User
Verified
Joined
Nov 24, 2018
Messages
7
Reaction score
0
Location
Norway
VCDS Serial number
C?ID=351732
Hmm, it could be. For me this happens in 2 and 3 gear. I feel that the clutch is releasing, not smooth and maybe out of sync.

For me It’s different from a full stop to drive again. I always turn off the start/stop engine system. But for me it seems like it’s a delay because of the start/stop system and if you disable this, the software does not change its parameters.


Some history:
When I received the car brand new, the shifting was smooth, then it got worse after around two weeks of driving and never got better. Starting to judder and hogg in 1,2 and 3. My problem has always been that the transmissions characteristics was changing on each drive. Very random and hard to show the technicians. No errors in the system and they say it’s nothing wrong with the car. We did, after a year, change the transmission oil. No flushing tho.

Then I bought a obd11 dongle and did the basic settings after reading that this might help. And oh boy it did. I would say 60% of my problems was gone. But nothing like when the car was brand new and first two weeks. So that’s why I bought vcds to see if can get some help and do some more.

But here we are. No new software, Audi says everything is in order, and I’m enjoying noticeable more noise from the transmission and some random judder/hogging. So I’m still trying to solve the last 40%.
 
   #10  

spacebar

Verified VCDS User
Verified
Joined
Nov 24, 2018
Messages
7
Reaction score
0
Location
Norway
VCDS Serial number
C?ID=351732
Anything I can do? I dont know if there’s a new firmware update.

Address 02: Auto Trans (J743) Labels:. 0BH-927-711.clb
Part No SW: 0GC 300 011 R HW: 0GC 927 711 G
Component: GSG DQ381 H06 0703 All Indexes compatible Firmware update needed?
 
Top