High Beam Assist retrofit on Golf 7

   #1  

darkchina811

Verified VCDS User
Verified
Joined
Apr 14, 2018
Messages
884
Reaction score
502
Location
ITALY
VCDS Serial number
C?ID=333184
I found a bargain for an almost new frameless interior mirror with auto-dimming and HBA support. I could not help but starting another retrofit project.

Now I have a simple auto-dimming mirror, so the wiring needs to be slightly modified. The current mirror uses four wires: switched +12V, GND, reverse signal and roof light signal.

The new mirror, part number 3G0 857 511 AE, has 7 populated positions into the 8pin connector. I know that four wires are: +12V, GND and Extended CAN.
(reverse signal is read from CAN, no need for wire).

What are the other 3 pins for? Does anybody have a WD for the mirror, from any MQB car? I downloaded Golf 2018 WDs from erwin but High Beam Assist (PR Code 8G1) is documented only with the bigger camera on the windshield, the camera used for other traffic-assist features.

the mirror does basic HBA and will show up at address 20 into the Gateway install list. also, since it is now a module on the network, shouldn't it be powered by permanent +12V instead of switched?
 
   #2  

darkchina811

Verified VCDS User
Verified
Joined
Apr 14, 2018
Messages
884
Reaction score
502
Location
ITALY
VCDS Serial number
C?ID=333184
apologies, I found the WD by looking harder into what I got from erwin lol.

it's five wires: +12V (switched, this is confirmed), GND, Extended CAN and the wire from the roof light.

I'll report back after I pull the CAN twisted pair. I need a leap of faith cause I already put A-Pillars back with their nasty clips. goddamnit.

BTW the feature is called MBA Main Beam Assist into the WD.
 
   #3  

darkchina811

Verified VCDS User
Verified
Joined
Apr 14, 2018
Messages
884
Reaction score
502
Location
ITALY
VCDS Serial number
C?ID=333184
I installed the mirror today. boy, I hate those A-pillar clips. it took me longer to remove the A-pillar than to pull the pair and terminate it.

the mirror came with all the coding bits at 0. with the experimental coding I was able to set BYTE 0 and 1 to 01, which mean halogen low and high beams.

I don't know how to set BYTE 3, which is apparently the car type; regular coding does not include Golf 7 and experimental coding is... in german.

I don't know how to change all remaining bytes but I doubt they all stay at zero.

I enabled what's needed in the BCM and got the menu in the radio, and I get the high beam symbol with the "A" (AUTO) when pushing the lights stalk. however, on a small test drive high beams never auto-engaged.

does anybody have further info, or a more complete coding label for the mirror?

here is actual scan. ignore the error on the gateway.

Code:
Saturday,03,November,2018,17:40:48:06888
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64(VirtualBox)
VCDS Version 18.9.0.2 (x64)  HEX-V2 CB: 0.4436.4
Data version: 20180927 DS296.0
www.Ross-Tech.com

Workshop Code: 011 01357 000000

VIN: WVWZZZAUZHW0xxxxx   License Plate:
Mileage: 24196km-15034mi   Repair Order: 

--------------------------------------------------------------------------------
Chassis Type: AU-VW37 (5Q0)
Scan: 01 03 08 09 10 15 16 17 18 19 20 42 44 52 5F 65

VIN: WVWZZZAUZHW0xxxxx   Mileage: 24196km-15034miles

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
18-Aux. Heat -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
20-High Beam Assist. -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
5F-Information Electr. -- Status: OK 0000
65-Tire Pressure -- Status: OK 0000

-------------------------------------------------------------------------------
Address 01: Engine (J623-CZCA)       Labels:. 04E-907-309-V1.clb
   Part No SW: 04E 906 027 HB    HW: 04E 907 309 BH
   Component: R4 1.4l TFS   H25 2833  
   Revision: R7H25---    
   Coding: 0119003223241D082000
   Shop #: WSC 21385 002 1048576
   ASAM Dataset: EV_ECM14TFS01104E906027HB 001005
   ROD: EV_ECM14TFS01104E906027HB.rod
   VCID: 6B833BBF03045EDF5B7-803F

   CAN Converter 01: 

No fault code found.
Readiness: 0110 0001

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 5Q0-907-379-IPB-V1.clb
   Part No SW: 5Q0 614 517 CC    HW: 5Q0 614 517 AG
   Component: ESC           H62 0637  
   Revision: 00000000    Serial number: 91596000011507
   Coding: 01FA6AA1242219704779060841C62980562498E2608294730020500A400203
   Shop #: WSC 131071 102 209715
   ASAM Dataset: EV_Brake1UDSContiMK100IPB 035019
   ROD: EV_Brake1UDSContiMK100IPB_035_VW37.rod
   VCID: 74B120C35E3A81278AD-8021

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255)       Labels:| 5G0-907-044.clb
   Part No SW: 5G0 907 044 BM    HW: 5G0 907 044 BM
   Component: Climatronic   H04 1601  
   Revision: 00001K08    
   Coding: 00020004104111011005004000101022
   Shop #: WSC 00028 028 00068
   ASAM Dataset: EV_ACClimaBHBVW37X 006142
   ROD: EV_ACClimaBHBVW37X_006_VW37.rod
   VCID: 73B323DF5B34861F937-8027

   Fresh Air Blower Front: 

   Refrigerant Pressure And Temperature Sender: 

   Air quality sensor: 

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:| 5Q0-937-08X-HV1.clb
   Part No SW: 5Q0 937 084 CL    HW: 5Q0 937 084 AN
   Component: BCM MQBAB H   H24 0175  
   Serial number: 01061633700891
   Coding: 00000946C20102FB0B244080B11407281400000000000000000000000000
   Shop #: WSC 01357 011 00000
   ASAM Dataset: EV_BCMMQB 015001
   ROD: EV_BCMBOSCH_015.rod
   VCID: 045170030E9AB1A7BAD-8051

   Control Unit For Wiper Motor: 
   Subsystem 1 - Part No SW: 5G1 955 119 A    HW: 5G1 955 119 A  Labels: 5QX-955-119-V1.CLB
   Component: WWS    160522  043 0551 
   Serial number:         160601172917
   Coding: 0E4DFD

   Rain Light Recognition Sensor: 
   Subsystem 2 - Part No SW: 5Q0 955 547 B    HW: 5Q0 955 547 B  Labels: 5Q0-955-547.CLB
   Component: RLHS  042 0105 
   Serial number: S5Y17M06D01H13M38S50
   Coding: 06A8DD

   Sensor For Anti Theft Alarm System: 
   Subsystem 3 - Part No SW: 5Q0 951 172     HW: 5Q0 951 172 
   Component: Sensor, DWA  005 0315 
   Serial number: 000000000ZY15028208R

   Alarm horn: 
   Subsystem 4 - Part No SW: 5Q0 951 605     HW: 5Q0 951 605 
   Component: Sirene, DWA  004 0311 
   Serial number: 00000000000030139763

No fault code found.

-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J791)       Labels:| 5Q0-919-298.clb
   Part No SW: 5Q0 919 298 D    HW: 5Q0 919 298 
   Component: PARKHILFE PLA H11 0042  
   Revision: --------    Serial number: 61131402901978
   Coding: 0031161041
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_EPHVA2CAU3700000 003019
   ROD: EV_EPHVA2CAU3700000_003.rod
   VCID: 40D9BC135A026D87DE5-8015

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5Q0-959-655.clb
   Part No SW: 5Q0 959 655 D    HW: 5Q0 959 655 D
   Component: AirbagVW20    015 0388  
   Serial number: 003F6R1V1W4Y
   Coding: 98CCC000000000005C0000CF004800000065
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_AirbaVW20SMEVW37X 002130
   ROD: EV_AirbaVW20SMEVW37X.rod
   VCID: 41DFB9175108648FD1B-8015

   Side Sensor Driver Front: 
   Subsystem 1 - Part No SW: -----------    HW: 480 001 506 16
   Component: SideSensor_Df  001 0887 
   Serial number: 35767000000432B44C1Q
   Coding: 2D2D2D

   Side Sensor Passenger Front: 
   Subsystem 2 - Part No SW: -----------    HW: 480 001 506 16
   Component: SideSensor_Pf  001 0887 
   Serial number: 358670000008B4C4DB17
   Coding: 2D2D2D

   Side Sensor Driver Rear: 
   Subsystem 3 - Part No SW: -----------    HW: 480 400 306 16
   Component: SideSensor_Dr  001 6149 
   Serial number: 3516502BB205729313D3
   Coding: 2D2D2D

   Side Sensor Passenger Rear: 
   Subsystem 4 - Part No SW: -----------    HW: 480 401 105 16
   Component: SideSensor_Pr  001 6149 
   Serial number: 3526502AF2076340F201
   Coding: 2D2D2D

   Front Sensor Driver: 
   Subsystem 5 - Part No SW: -----------    HW: 480 401 106 16
   Component: FrontSensor_D  001 6149 
   Serial number: 35565029B21160C1025X
   Coding: 2D2D2D

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel (J527)       Labels:| 5Q0-953-549.clb
   Part No SW: 5Q0 953 507 FT    HW: 5Q0 953 549 F
   Component: Lenks. Modul  003 0140  
   Revision: --------    Serial number: 13061608490829
   Coding: 0400
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_SMLSKLOMQB 020002
   ROD: EV_SMLSKLOMQB_VW37.rod
   VCID: 0D4755275DD0F0EFE53-8059

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5G0-920-XXX-17.clb-SRI3
   Part No SW: 5G1 920 750 B    HW: 5G1 920 750 B
   Component: KOMBI         303 8311  
   Coding: 03A501802290000D02083B041400000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DashBoardVDDMQBAB 009051
   ROD: EV_DashBoardVDDMQBAB_009_VW37.rod
   VCID: 26150A8BD866A3B7C49-8073

No fault code found.

-------------------------------------------------------------------------------
Address 18: Aux. Heat (J364)       Labels:| 5Q0-963-272.clb
   Part No SW: 5Q0 963 272 B    HW: 5Q0 963 272 B
   Component: STH-MQB       006 0069  
   Coding: 1309
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_AuxilParkiHeateWOS 002014
   ROD: EV_AuxilParkiHeateWOS.rod
   VCID: 3537DDC715C0D82F7D3-8061

   Remote Control Auxiliary Heater: 
   Subsystem 1 - Part No SW: 3Q0 963 513     HW: 3Q0 963 513 
   Component: R64 D208L  004 0401 
   Serial number: 00000000000000180382

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:| 5Q0-907-530-V1.clb
   Part No SW: 5Q0 907 530 AM    HW: 5Q0 907 530 F
   Component: GW MQB High   128 1265  
   Revision: --------    Serial number: 0004271482
   Coding: 030100043F085700FB000248080F00010001050000000000000000000000
   Shop #: WSC 12345 123 28888
   ASAM Dataset: EV_GatewLear 013020
   ROD: EV_GatewLear_013_VW37.rod
   VCID: 7CA108E3766AC967C2D-8029

   Alternator: 

   Multi Function Steering Wheel Control Module: 
   Subsystem 2 - Part No SW: 5G0 959 442 M    HW: 5G0 959 442 M  Labels: 3C8-959-537.CLB
   Component: E221__MFL-DC1  H11 0103 
   Serial number: 29160001142480026234
   Coding: 28FFFF

   Battery Monitoring Control Module: 
   Subsystem 3 - Part No SW: 5Q0 915 181 K    HW: 5Q0 915 181 K
   Component: J367-BDMHella  H10 9070 
   Serial number: 8442320304          

1 Fault Found:
1541 - Data Set Implausible 
          B2012 00 [009] -  - 
          [unplausibler Datensatz: Funktion "erweiterte Anzeige StartStopp"]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 21
                    Mileage: 24194 km
                    Date: 2018.11.03
                    Time: 00:10:53

                    Supply voltage: Terminal 30: 12.1 V
                    Terminal 15: On

-------------------------------------------------------------------------------
Address 20: High Beam Assist. (J844)       Labels:| 8S0-857-511.clb
   Part No SW: 3G0 857 511 AE    HW: 3G0 857 511 AE
   Component: FLA           H10 0003  
   Revision: AA001001    
   Coding: 0101000000000000000000
   Shop #: WSC 01357 011 00000
   ASAM Dataset: EV_HighBeamAssisAU33X 001017
   ROD: EV_HighBeamAssisAU33X_VW37.rod
   VCID: 6B833BBF03045EDF5B7-803F

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386)       Labels:| 5QX-959-X93-42.clb
   Part No SW: 5Q0 959 593 E    HW: 5Q0 959 593 B
   Component: TSG FS        020 0041  
   Serial number: 300516EEU02971
   Coding: 003B0220D000040100001000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DCUDriveSideEWMAXKLO 006003
   ROD: EV_DCUDriveSideEWMAXCONT.rod
   VCID: 43D3B31F4B14769FC37-8017

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist (J500)       Labels:| 5Q0-909-144.clb
   Part No SW: 3Q0 909 144 K    HW: 3Q0 909 144 H
   Component: EPS_MQB_ZFLS  506 5072  
   Coding: 8307
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_SteerAssisMQB 013144
   ROD: EV_SteerAssisMQB_013.rod
   VCID: 3A2DCEFB3CDE3757901-806F

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387)       Labels:| 5QX-959-X92-52.clb
   Part No SW: 5Q0 959 592 E    HW: 5Q0 959 592 B
   Component: TSG BFS       020 0041  
   Serial number: 280516EER24731
   Coding: 003B0020DE00040100801000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DCUPasseSideEWMAXKLO 006003
   ROD: EV_DCUPasseSideEWMAXCONT.rod
   VCID: 42DDB61B540E7F97C81-8017

No fault code found.

-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-STD2.clb
   Part No SW: 3Q0 035 824 B    HW: 3Q0 035 824 B
   Component: MU-S--ER      710 0744  
   Serial number:               
   Coding: 02730000AA0000005111000100080A001F0200D40120010003
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_MUStd4CDELP 001001
   ROD: EV_MUStd4CDELP_VW26.rod
   VCID: 2C01F8A3C68A99E712D-8079

   Operating And Display Unit 1: 
   Subsystem 1 - Part No SW: 3G0 919 605 B    HW: 3G0 919 605 B
   Component: ABT_Std-2  H53 1031 
   Serial number: VWZ8Z9SJT00QNA      

No fault code found.

-------------------------------------------------------------------------------
Address 65: Tire Pressure (J502)       Labels: 3AA-907-273.clb
   Part No SW: 5Q0 907 273 B    HW: 5Q0 907 273 
   Component: RDKBERU30     H04 0009  
   Serial number: 40000000018766
   ASAM Dataset: EV_RDKBERU30 006001
   ROD: EV_RDKBERU30_006_VW37.rod
   VCID: 3431E0C31EBAC1274AD-8061

No fault code found.

End----------(Elapsed Time: 01:47, VBatt start/end: 12.4V/12.3V)-----------
 
   #4  

PetrolDave

Verified VCDS User
Verified
Joined
Dec 16, 2014
Messages
3,776
Reaction score
3,777
Location
South Molton, UK
VCDS Serial number
C?ID=1423
however, on a small test drive high beams never auto-engaged.
Did you go fast enough for the HBA to engage? Check the speed settings in the adaptation channels of the #20 module.
 
   #5  

darkchina811

Verified VCDS User
Verified
Joined
Apr 14, 2018
Messages
884
Reaction score
502
Location
ITALY
VCDS Serial number
C?ID=333184
ah, that might be. I'll tweak and test drive again.
 
   #6  

darkchina811

Verified VCDS User
Verified
Joined
Apr 14, 2018
Messages
884
Reaction score
502
Location
ITALY
VCDS Serial number
C?ID=333184
it works, although I don't fully understand the assistant's logic.

it appears like it has to be completely dark, I mean not even street illumination. for who has the module A5 camera there are two light-intensity adaptations to be tweaked that I do not find in the list of my module 20.

guess it is what it is.

there are some examples of cars with HBA by module 20 but they use the older mirror (with frame) and it has different HW/SW and coding lenght...
 
   #8  

siLc

Verified VCDS User
Verified
Joined
Jul 9, 2014
Messages
637
Reaction score
529
Location
Tallinn, Estonia
VCDS Serial number
C?ID=330192
it works, although I don't fully understand the assistant's logic.

it appears like it has to be completely dark, I mean not even street illumination. for who has the module A5 camera there are two light-intensity adaptations to be tweaked that I do not find in the list of my module 20.

guess it is what it is.
Your guess is correct. HBA is a function to be used on extra-urban roads, which are unlit by street lights. No reason to use the main beams if the road is already lit up. Even A5 doesn't switch to main beams when driving on an unlit road if there are visible street lights far away, which actually is a hindrance.
 
   #9  

darkchina811

Verified VCDS User
Verified
Joined
Apr 14, 2018
Messages
884
Reaction score
502
Location
ITALY
VCDS Serial number
C?ID=333184
a couple of days ago I drove one hour on the highway. I ended up deactivating this stupid assistant like after ten minutes.

whenever a car approaches in front of me, the high beams never switch back to lows soon enough, and people flashes me all the time.

I am kind of disappointed. pretty useless.
 
   #10  

golfi_vend

Verified VCDS User
Verified
Joined
Apr 9, 2014
Messages
2,141
Reaction score
2,049
Location
Tartu, Estonia
VCDS Serial number
C?ID=195131
a couple of days ago I drove one hour on the highway. I ended up deactivating this stupid assistant like after ten minutes.

whenever a car approaches in front of me, the high beams never switch back to lows soon enough, and people flashes me all the time.

I am kind of disappointed. pretty useless.
I'm very happy with my car HBA. Although my car has A5 camera for assistant, which by many feedbacks works better than mirror mounted one. It has drawback like pedestrian road light intervenes, but You have to be aware of these "features" and it will work fantastically. I also have SEAT LED lights and no car has ever flashed me during using this feature. And during dark time(Autumn, Winter and Spring), like now, I drive a lot in the dark.
 
   #11  

darkchina811

Verified VCDS User
Verified
Joined
Apr 14, 2018
Messages
884
Reaction score
502
Location
ITALY
VCDS Serial number
C?ID=333184
I was considering the retrofit for the A5 camera, but I would need to replace the windscreen. not gonna happen.
 
   #12  

PetrolDave

Verified VCDS User
Verified
Joined
Dec 16, 2014
Messages
3,776
Reaction score
3,777
Location
South Molton, UK
VCDS Serial number
C?ID=1423
I have the "lowline" 20 camera and I find the HBA works really well, never been flashed by oncoming drivers and switches back to main beam as soon as they have passed.

Only change I have done is to lower the speed threshold as 40mph (58kph) was too fast for HBA to work on the narrow single track lanes where I live.
 
Last edited:
   #13  

langers2k

Verified VCDS User
Verified
Joined
Oct 20, 2014
Messages
233
Reaction score
192
Location
UK
VCDS Serial number
C?ID=224085
My earlier "lowline" also works pretty well on a PQ35 Octavia. Very occasionally it's slow to react but it's typically tail lights rather than headlights it struggles with.

I'd check the coding to see if there is anything obvious, ideally checking against another MK7 golf.

Maybe Italian drivers are just more eager to flash their headlights!
 
   #14  

darkchina811

Verified VCDS User
Verified
Joined
Apr 14, 2018
Messages
884
Reaction score
502
Location
ITALY
VCDS Serial number
C?ID=333184
well, we do have a thing for being impatient and just pissed while driving. also, most of the times the code is just a suggestion...
 
   #15  

darkchina811

Verified VCDS User
Verified
Joined
Apr 14, 2018
Messages
884
Reaction score
502
Location
ITALY
VCDS Serial number
C?ID=333184
there must be something not properly configured. I tried again and the function is barely usable.

the HBA never switches off high beams soon enough when a car approaches in the opposite direction. also, it somehow seems to be much more sensitive to street illumination than to car approaching from the front.

unfortunately there are not a lot of reference scans for taking inspiration.

guess it will stay off for now :banghead:
 
   #16  

darkchina811

Verified VCDS User
Verified
Joined
Apr 14, 2018
Messages
884
Reaction score
502
Location
ITALY
VCDS Serial number
C?ID=333184
I have permanently disabled the feature, because it just does not kill high beams soon enough when a car approaches me.

I am considering going back to the non-HBA mirror.
 
   #17  

PetrolDave

Verified VCDS User
Verified
Joined
Dec 16, 2014
Messages
3,776
Reaction score
3,777
Location
South Molton, UK
VCDS Serial number
C?ID=1423
I have permanently disabled the feature, because it just does not kill high beams soon enough when a car approaches me.

I am considering going back to the non-HBA mirror.
HBA does seem to work well for some people (including me) but others (like you) find it very slow to return to dipped beam.

It doesn't seem to have any pattern whether it's good or bad :confused:
 
   #18  

darkchina811

Verified VCDS User
Verified
Joined
Apr 14, 2018
Messages
884
Reaction score
502
Location
ITALY
VCDS Serial number
C?ID=333184
I would still bet my module 20 is not configured properly, but I don't have other examples to look at. when I reinstall ODIS I will check if it helps.
 
   #19  

PetrolDave

Verified VCDS User
Verified
Joined
Dec 16, 2014
Messages
3,776
Reaction score
3,777
Location
South Molton, UK
VCDS Serial number
C?ID=1423
I would still bet my module 20 is not configured properly, but I don't have other examples to look at. when I reinstall ODIS I will check if it helps.
Don't know if it helps, but here is the adpmap for my 20 (including coding):
Code:
;SW:5G0-857-511-D   HW:5G0-857-511 ---  High Beam Assist.
;Component:FLA           H04 0002, Coding:01028F6B76765D525220343E01
;EV_HighBeamAssisAU37X,001009,EV_HighBeamAssisAU37X.rod
;Wednesday,05,October,2016,11:39:15:40444
;VCDS Version: Release 16.8.2  Data version: 20160926 DS261.0
;VCID: 2B16C7424298CC1A31-807E

IDE03885-Speed threshold for high beam recommendation off,28 km/h
IDE03886-Activation speed for high beam assistant,58 km/h
IDE03887-Location recognition mode,Standard 
IDE03888-Left-/right hand driving,Left 
IDE80016-Analysis 16,3000 ms
IDE80017-Analysis 17,3000 ms
IDE80018-Analysis 18,600 ms
IDE80019-Analysis 19,6000 ms
IDE80020-Analysis 20,1600 ms
IDE80021-Analysis 21,2000 ms
IDE80032-Analysis 32,On 
IDE80033-Analysis 33,On 
IDE80048-Analysis 48,25 
IDE80049-Analysis 49,45 
IDE80050-Analysis 50,13 
IDE80051-Analysis 51,20 
IDE80052-Analysis 52,3 
IDE80053-Analysis 53,9 
IDE80054-Analysis 54,9 
IDE80055-Analysis 55,64 
IDE80056-Analysis 56,28 
IDE80057-Analysis 57,90 km/h
IDE80058-Analysis 58,64 
IDE80059-Analysis 59,250 
IDE80060-Analysis 60,3 
IDE80061-Analysis 61,2 
IDE80064-Analysis 64,OFF 
IDE80080-Analysis 80,On 
IDE80081-Analysis 81,On 
IDE80096-Analysis 96,100 
IDE80097-Analysis 97,100 
IDE80098-Analysis 98,100 
IDE80099-Analysis 99,On 
IDE80100-Analysis 100,25 
IDE80102-Analysis 102,25 
IDE80128-Analysis 128,On 
IDE80144-Analysis 144,OFF 
IDE80234-ENG110471-Analysis 234-DTC_0x00030E,activated 
IDE80234-ENG110492-Analysis 234-DTC_0x01BE02,activated 
IDE80234-ENG110493-Analysis 234-DTC_0x01BF01 2,activated 
IDE80234-ENG110472-Analysis 234-DTC_0x01C904,activated 
IDE80234-ENG110473-Analysis 234-DTC_0x01D204,activated 
IDE80234-ENG110474-Analysis 234-DTC_0x021401,activated 
IDE80234-ENG110475-Analysis 234-DTC_0x021402 2,activated 
IDE80234-ENG110476-Analysis 234-DTC_0x041200,activated 
IDE80234-ENG110477-Analysis 234-DTC_0x051304,activated 
IDE80234-ENG120023-Analysis 234-DTC_0x05200E,activated 
IDE80234-ENG120034-Analysis 234-DTC_0x052204 3,activated 
IDE80234-ENG120024-Analysis 234-DTC_0x052404 2,activated 
IDE80234-ENG110481-Analysis 234-DTC_0x080400,not active 
IDE80234-ENG110482-Analysis 234-DTC_0x080401 2,activated 
IDE80234-ENG110480-Analysis 234-DTC_0x087303,activated 
IDE80234-ENG120025-Analysis 234-DTC_0x0D7D00 2,activated 
IDE80234-ENG120027-Analysis 234-DTC_0x0D7D01 4,activated 
IDE80234-ENG120028-Analysis 234-DTC_0x0D7D02 5,activated 
IDE80234-ENG120029-Analysis 234-DTC_0x0D7D03 6,activated 
IDE80234-ENG120030-Analysis 234-DTC_0x0D7D04 7,activated 
IDE80234-ENG120031-Analysis 234-DTC_0x0D7D05 8,activated 
IDE80234-ENG120033-Analysis 234-DTC_0x0D7D06 10,activated 
IDE80234-ENG120022-Analysis 234-DTC_0x0D7D07,activated 
IDE80234-ENG120026-Analysis 234-DTC_0x0D7F00 3,activated 
IDE80234-ENG120032-Analysis 234-DTC_0x0D7F01 9,activated 
IDE80234-ENG110485-Analysis 234-DTC_0x0DF800,activated 
IDE80234-ENG110486-Analysis 234-DTC_0x0DF900 2,activated 
IDE80234-ENG110487-Analysis 234-DTC_0x3FD80E,activated 
IDE80234-ENG110488-Analysis 234-DTC_0x3FDB0E 2,activated 
IDE80234-ENG110489-Analysis 234-DTC_0x3FDC0E 3,activated 
IDE80234-ENG110491-Analysis 234-DTC_0x3FE00E 2,activated 
IDE80234-ENG110490-Analysis 234-DTC_0x3FE30E,activated 


Elapsed Time: 00:10
 
  • Like
Reactions: Uwe
   #20  

darkchina811

Verified VCDS User
Verified
Joined
Apr 14, 2018
Messages
884
Reaction score
502
Location
ITALY
VCDS Serial number
C?ID=333184
I fu**ed it up, merry christmas :banghead:

I connected ODIS (offline) and saw nothing helpful in the coding. So I tried "reset of all adaptations" and now the module says it is not parameterized.

this will need to be fixed by ODIS ONLINE, if it doesn't get mad because the module was not in my car from the factory.
 
Top