Installing rns 315 gps in mk6 gti

[Adolph]

My question is has anyone installed the RNS 315 into their MK6 GTI lately. I did this last weekend and and it worked out fine. I used my vagcom and opened the can gateway and then opened the navigation coding page. and check the navigation box. The navigation box was already checked so i did not change anything. I ran a scan and Adress 19 CAN Gateway came up with 4 faults. 1. Radio No signal communication, 2. Control Module incorrectly coded., No.3 Vehicle position recognition control module no signal/communication, 4. Control module for audio interface no signal/communication.

I did disconnect the position module in the back of the car in the headliner.

Everything works fine. Radio, GPS, Phone and i am wondering if i have to make any adjustments with the vag com.

Any help would be great.

Thanks

 

[Uwe]

Please post up an Auto-Scan so people can see everything that's installed in your car, how it's configured, and how it's all interacting.

-Uwe-

 

[Adolph]

Have to bone up on how to post a auto scan. Played around today and got everything sorted out.

Will read up on posting the Augo Scan