Current Versions

   #361  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
29,572
Reaction score
21,100
Location
USA
VCDS Serial number
HC100001
guys, is there any way why my Hexnet today strat give continuously beep .. and red indicators start blinking 1 by 1
it happen when I connect it to OBD
all is ok as far as I know, diagnostic, ...but noise from :facepalm:
19.4 version
I believe continuous beeping and red blinking when connected to OBD is supposed to mean a shorted K-Line at the OBD-II connector. What do you get when you do [Options] -> [Test] in VCDS?

-Uwe-
 
   #362  

Spacewalker

Verified VCDS User
Verified
Joined
Jun 10, 2014
Messages
855
Reaction score
579
Location
Poland
VCDS Serial number
C?ID=159607
I believe continuous beeping and red blinking when connected to OBD is supposed to mean a shorted K-Line at the OBD-II connector. What do you get when you do [Options] -> [Test] in VCDS?

-Uwe-
I use on omy bench test loom, when is no Kline wire
CAN testting
K1 ok
K2 ok
Vbat 12V
Vign 10.5v


Now is only one LED bliking ,
when 2 was bliking (2 narrow) I let device connected for some time
after I back - was silent ;)
 
   #363  

Shaun

Ross-Tech Employee
Joined
Jan 29, 2014
Messages
958
Reaction score
1,544
Location
USA
Bump for beta CB V0.4507
* More CAN broadcast filtering
 
Top