- Joined
- Jan 29, 2014
- Messages
- 21,923
- Reaction score
- 9,308
- Location
- Montgomery, NY, USA
- VCDS Serial number
- C?ID=57337
Take plug off of ecu and identify the track you wish to investigate with WD, then remove connector to isolate, further now test the 5 volt ref at controller directly.
Make double sure all power feeds/grounds or fuses are good!
Do not perform tasks if you feel you are unsure of the scope of the project & to prevent inducing damage.
Make double sure all power feeds/grounds or fuses are good!
Do not perform tasks if you feel you are unsure of the scope of the project & to prevent inducing damage.