- Joined
- Aug 18, 2014
- Messages
- 2
- Reaction score
- 0
- VCDS Serial number
- C?ID=223385
Good Morning all,
I have a 2009 Passat and I started changing my rear brake pads and rotors yesterday. The car is equipped with the Electronic parking brake so I ordered a Vag-com from Ross-tech to release the rear pistons. I followed all the instructions on the Ross-Tech website and it seems like the it is not working correctly. I connected the battery charger, cycled the parking brake then i ran the code to open the brakes. I then pulled the caliper off and tried to compress the piston but it would not go in. When I ran the code to open the brakes I could hear the electronic motors running and on the screen it never displays the voltage and they stop at position 7. Can anyone tell me if position 7 is fully open or should it go further I would really like to get these changes today since they are grinding right now and it is not safe to drive.
Thank you,
Dennis F.
I have a 2009 Passat and I started changing my rear brake pads and rotors yesterday. The car is equipped with the Electronic parking brake so I ordered a Vag-com from Ross-tech to release the rear pistons. I followed all the instructions on the Ross-Tech website and it seems like the it is not working correctly. I connected the battery charger, cycled the parking brake then i ran the code to open the brakes. I then pulled the caliper off and tried to compress the piston but it would not go in. When I ran the code to open the brakes I could hear the electronic motors running and on the screen it never displays the voltage and they stop at position 7. Can anyone tell me if position 7 is fully open or should it go further I would really like to get these changes today since they are grinding right now and it is not safe to drive.
Thank you,
Dennis F.