Resolved 2019 Golf R MK 7.5 Front Assist not available

Resolved
Status
Not open for further replies.
   #1  

skwishst

Verified VCDS User
Verified
Joined
Jan 15, 2023
Messages
5
Reaction score
1
Location
New Jersey, USA
VCDS Serial number
C?ID=44351
Hi,

I have the Front Assist Not available on my 2019 Golf R MK 7.5. It started after driving through heavy snow, ice and salt but there has been no bumping anything so I believe the radar alignment should still be good. I cleaned the whole car including the front emblem and radar unit behind it. Additionally, following this thread I went into module 13 (Auto Dist. Reg) and under basic settings executed the 'Reset Personalization settings' but got the message 'Not Running'. I did this with the engine running. It was not clear to me how to clear the dynamic values so maybe that is all I need if someone can help with that. I included the auto scan.
Code:
Monday,16,January,2023,09:47:50:02311
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 22.10.0.1 (x64)  HEX-V2 CB: 0.4623.4
Data version: 20221026 DS344.0
www.Ross-Tech.com


VIN: WVWWA7AU3KW149584   License Plate:
Mileage: 43026km-26735mi   Repair Order:



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: AU-VW37 (3Q0)
Scan: 01 03 05 08 09 10 13 14 15 17 19 22 29 2B 39 3C 42 44 47 4B
          52 5F 75 A5 A9 D6 D7

VIN: WVWWA7AU3KW149584   Mileage: 43026km-26735miles

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
13-Auto Dist. Reg -- Status: Malfunction 0010
14-Susp. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
22-AWD -- Status: OK 0000
29-Left Light -- Status: OK 0000
2B-Steer. Col. Lock -- Status: OK 0000
39-Right Light -- Status: OK 0000
3C-Lane Change -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
47-Sound System -- Status: OK 0000
4B-Multifunc. Module -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
5F-Information Electr. -- Status: Malfunction 0010
75-Telematics -- Status: OK 0000
A5-Frt Sens. Drv. Assist -- Status: OK 0000
A9-Struct. Borne Sound -- Status: OK 0000
D6-Light Ctrl Left 2 -- Status: OK 0000
D7-Light Ctrl Right 2 -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-DLRA)       Labels:. 06K-907-425-V1.clb
   Part No SW: 8V0 906 259 Q    HW: 06K 907 425 J
   Component: R4 2.0l TFSI  H13 0002 
   Revision: --H13---    CVN: 50427D05
   Coding: 091900122446000E3004
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ECM20TFS0208V0906259Q 001003
   ROD: EV_ECM20TFS0208V0906259Q.rod
   VCID: 4EC593D88057B50B29E-801A
   VINID: 9E69E74474650DB9C110914810D05E9846

No fault code found.
Readiness: 1010 0101

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 5Q0-907-379-IPB-V1.clb
   Part No SW: 5Q0 614 517 DS    HW: 5Q0 614 517 BN
   Component: ESC           H35 0108 
   Revision: 00000000    Serial number: 60509000000090
   Coding: 01FA6BA150240975457C030860C76980D60A90A2C0069637344050D4D0A84B0B0000000012121212B835351919323200
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_Brake1UDSContiMK100IPB 038007
   ROD: EV_Brake1UDSContiMK100IPB_038.rod
   VCID: 05576CF415A1B653D84-8050

No fault code found.

-------------------------------------------------------------------------------
Address 05: Acc/Start Auth. (J518)       Labels:| 5Q0-959-435.clb
   Part No SW: 3Q0 959 435 L    HW: 3Q0 959 435 L
   Component: VWKESSYMQB    037 1204 
   Revision: 00037000    Serial number: 6097285554
   Coding: 132C0C0623
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_KessyHellaMQBAB 004046
   ROD: EV_KessyHellaMQBAB.rod
   VCID: 43D3B2EC5B154863B60-8016

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255)       Labels:| 5G0-907-044.clb
   Part No SW: 5G0 907 044 CF    HW: 5G0 907 044 CF
   Component: Climatronic   H04 1801 
   Revision: 00001K08   
   Coding: 0002000420010000010500001211140A
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ACClimaBHBVW37X 006145
   ROD: EV_ACClimaBHBVW37X_006_VW37.rod
   VCID: 6D8734542D116E13304-8038

   Fresh air blower control module (front):

   A/C pressure/coolant temperature sensor:

   Air quality sensor:

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:. 5Q0-937-08X-V2.clb
   Part No SW: 5Q0 937 085 BS    HW: 5Q0 937 085 BF
   Component: BCM MQBAB MNA H38 0273 
   Serial number: 00001906400343
   Coding: 000000000000000000000000000000000000000000000000000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_BCMMQB 019001
   ROD: EV_BCMBOSCH_019_VW37.rod
   VCID: 0B435ACC33C5C0238E0-805E

   Wiper motor control module:
   Subsystem 1 - Part No SW: 5G1 955 119 A    HW: 5G1 955 119 A  Labels: 5QX-955-119-V1.CLB
   Component: WWS    190210  043 0551
   Serial number:         190223013519
   Coding: 0E4DDD

   Rain/Light Recognition Sensor:
   Subsystem 2 - Part No SW: 5Q0 955 547 B    HW: 5Q0 955 547 B  Labels: 5Q0-955-547.CLB
   Component: RLHS  052 0107
   Serial number: S6Y19M03D06H21M21S57
   Coding: 00A8DD

   Steering Column Switch:
   Subsystem 3 - Part No SW: 5Q1 953 507 M    HW: 5Q1 953 549
   Component: J527 SMLS MQB  004 0060
   Serial number: 00000026021904220040

No fault code found.

-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels:| 5Q0-919-294.clb
   Part No SW: 5QA 919 294 C    HW: 5QA 919 294
   Component: PDC 8 KanalH07 0050 
   Serial number: 000308418019066
   Coding: 0471155801
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_EPHVA18AU3700000 009039
   ROD: EV_EPHVA18AU3700000_009_VW37.rod
   VCID: 4CC199D0764B871B47A-8018

No fault code found.

-------------------------------------------------------------------------------
Address 13: Auto Dist. Reg (J428)       Labels:| 5Q0-907-572-V2.clb
   Part No SW: 5Q0 907 572 P    HW: 3QF 907 572 A
   Component: ACC BOSCH MQB H11 0682 
   Coding: 2B0000C159FFC728949C810560401600000000000000000004
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ACCBOSCHVW416 002008
   ROD: EV_ACCBOSCHVW416_002_VW37.rod
   VCID: 44D1B1F05E1B4F5B8FA-8010

2 Faults Found:
0267 - Sensor for Automatic Distance Regulation; Incorrectly Positioned
          C1103 00 [009] - -
          [FAULT_ALIGNMENT_NOT_OK]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 113
                    Mileage: 43026 km
                    Date: 2023.01.16
                    Time: 09:31:27

                    Control Module temperature: 22 °C
                    Voltage terminal 15: 11.9 V
                    Velocity_vehicle_reference: 0.00 m/s
                    Longitudinal_acceleration_vehicle_reference: 0.00 m/s²
                    Status_ACC_System: ACC_Off_MainSwitch_Off

0791 - Sensor for Automatic Distance Regulation; Incorrectly Positioned
          C1103 00 [009] - -
          [FAULT_MISALIGNMENT_VERTICAL]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 113
                    Mileage: 43026 km
                    Date: 2023.01.16
                    Time: 09:31:27

                    Control Module temperature: 22 °C
                    Voltage terminal 15: 11.9 V
                    Velocity_vehicle_reference: 0.00 m/s
                    Longitudinal_acceleration_vehicle_reference: 0.00 m/s²
                    Status_ACC_System: ACC_Off_MainSwitch_Off


-------------------------------------------------------------------------------
Address 14: Susp. Elect. (J250)       Labels: 5Q0-907-376.clb
   Part No SW: 5Q0 907 376 B    HW: 5Q0 907 376 A
   Component: DAEMPFUNGS-SG H17 0121 
   Serial number: 23021941350206
   ASAM Dataset: EV_DRCONTITEMIC 001019
   ROD: EV_DRCONTITEMIC_VW37.rod
   VCID: 3829D50012D31BBB132-806C

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5Q0-959-655.clb
   Part No SW: 5Q0 959 655 J    HW: 5Q0 959 655 J
   Component: AirbagVW20    010 0830 
   Serial number: 003GCR0BFJS2
   Coding: 8CCCFC00000000005000001AC24800000065
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_AirbaVW20SMEVW37X 002144
   ROD: EV_AirbaVW20SMEVW37X_VW37.rod
   VCID: 47CBA6FC6F2D64436A8-8012

   Seat occupied recognition passenger side:
   Subsystem 1 - Part No SW: 4M0 959 339 B    HW: 4M0 959 339 B
   Component: BF-Gewichtss.  H13 0022
   Serial number: IBH00000000000B5INV5
   Coding: 303344

   Crash sensor for side airbag: driver side:
   Subsystem 2 - Part No SW: -----------    HW: 480 000 603 19
   Component: SideSensor_Df  001 0887
   Serial number: 357000000002D129193C
   Coding: 2D2D2D

   Front Passenger's Side Airbag Crash Sensor:
   Subsystem 3 - Part No SW: -----------    HW: 480 000 703 19
   Component: SideSensor_Pf  001 0887
   Serial number: 3580000000034C19A93O
   Coding: 2D2D2D

   Rear Side Airbag Crash Sensor (on driver's side):
   Subsystem 4 - Part No SW: -----------    HW: 480 400 803 19
   Component: SideSensor_Dr  003 6149
   Serial number: 35100019D2F0DEF5371L
   Coding: 2D2D2D

   Passenger side rear thorax airbag crash sensor:
   Subsystem 5 - Part No SW: -----------    HW: 480 400 803 19
   Component: SideSensor_Pr  003 6149
   Serial number: 3520001C12EFF425E30C
   Coding: 2D2D2D

   Crash sensor for front airbag: driver side:
   Subsystem 6 - Part No SW: -----------    HW: 480 400 703 19
   Component: FrontSensor_D  004 6149
   Serial number: 35500010C2C091C2777%
   Coding: 2D2D2D

   Crash sensor for front airbag: front passenger side:
   Subsystem 7 - Part No SW: -----------    HW: 480 400 703 19
   Component: FrontSensor_P  004 6149
   Serial number: 35600010C2C091C2269$
   Coding: 2D2D2D

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5G0-920-XXX-17.clb-SRI3
   Part No SW: 5G1 920 891 B    HW: 5G1 920 891 B
   Component: KOMBI         403 4191 
   Coding: 0BAD30127F88CF0502886B0B5401000080000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DashBoardVDDMQBAB 009058
   ROD: EV_DashBoardVDDMQBAB_009_VW26.rod
   VCID: 2C01F950D68BA71B67A-8078

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:| 3Q0-907-530-V1.clb
   Part No SW: 3Q0 907 530 AA    HW: 3Q0 907 530 C
   Component: GW MQB High   521 5366 
   Serial number: 19011910802034
   Coding: 0101000838085900FB00823A880F00000001070000000000000000000000
   Shop #: WSC 01357 011 00200
   GVL: 01C63C100000060040CC800080004C0000000000000200000000000000000000
   ASAM Dataset: EV_GatewNF 013025
   ROD: EV_GatewNF_VW37.rod
   VCID: 6E8533582017950B09E-803A

   Generator:
   Component: 0-01-0d-01-04 

   Multifunction steering wheel control module:
   Subsystem 2 - Part No SW: 5G0 959 442 AE    HW: 5G0 959 442 AE  Labels: 3C8-959-537.CLB
   Component: E221__MFL-DC1  H11 0052
   Serial number: 29190000367250079075
   Coding: 2CFFFF

No fault code found.

-------------------------------------------------------------------------------
Address 22: AWD (J492)       Labels:* 0CQ-907-554.clb
   Part No SW: 0CQ 907 554 J    HW: 0CQ 525 130
   Component: Haldex4Motion H55 7084 
   Serial number: HA1-00029.01.19
   Coding: 0001
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_AllWheelContrHA1VW37X 004013
   ROD: EV_AllWheelContrHA1VW37X_004.rod
   VCID: 4CC199D0764B871B47A-8018

No fault code found.

-------------------------------------------------------------------------------
Address 29: Left Light (J1018)       Labels: 8V0-907-399.clb
   Part No SW: 8V0 907 399 D    HW: 8V0 907 399 D
   Component: LCM_MLBevoH08 0014 
   ASAM Dataset: EV_LCMLeftHELLAAU736 001012
   ROD: EV_LCMLeftHELLAAU736_VW37.rod
   VCID: 47CBA6FC6F2D64436A8-8012

No fault code found.

-------------------------------------------------------------------------------
Address 2B: Steer. Col. Lock (J764)       Labels:| 1EA-905-861.clb
   Part No SW: 2Q0 905 861 A    HW: 2Q0 905 861 A
   Component: ELV-MQBB      H08 0021 
   Serial number: 19000030038013
   Coding: 0000000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ELVMarqMQBA0 002002
   ROD: EV_ELVMarqMQBA0_VW37.rod
   VCID: 313FE824F1A9CAF354C-8064

No fault code found.

-------------------------------------------------------------------------------
Address 39: Right Light (J1023)       Labels: 8V0-907-399.clb
   Part No SW: 8V0 907 399 D    HW: 8V0 907 399 D
   Component: LCM_MLBevoH08 0014 
   ASAM Dataset: EV_LCMRightHELLAAU736 001012
   ROD: EV_LCMLeftHELLAAU736_VW37.rod
   VCID: 47CBA6FC6F2D64436A8-8012

No fault code found.

-------------------------------------------------------------------------------
Address 3C: Lane Change (J1086)       Labels:| 5Q0-907-686.clb
   Part No SW: 5Q0 907 686 C    HW: 5Q0 907 686 C
   Component: HRE_Master    H12 0081 
   Serial number: 0508915592
   Coding: 02011103
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_HREntryHella 001028
   ROD: EV_HREntryHella_VW37.rod
   VCID: 3D27C4143DF13E93C04-8068

   Lane change assistance control module 2:
   Subsystem 1 - Part No SW: 5Q0 907 685 C    HW: 5Q0 907 685 C
   Component: HRE_Slave  H12 0081
   Serial number: 0508548769         
   Coding: 020111

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386)       Labels:| 5QX-959-X93-42.clb
   Part No SW: 5Q0 959 593 F    HW: 5Q0 959 593 F
   Component: TSG FS001 0287 
   Serial number: YE007SBL0647B
   Coding: 003E13208000040000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DCU2DriveSideMAXHKLO 001010
   ROD: EV_DCU2DriveSideMAXHKLO_VW37.rod
   VCID: 44D1B1F05E1B4F5B8FA-8010

   Rear Driver Side Door Control Module:
   Subsystem 1 - Part No SW: 5Q0 959 811 D    HW: 5Q0 959 811 D  Labels: 5QX-959-81X-V1.CLB
   Component: FOND_FHSG_DRV  006 0007
   Serial number: 00000000000028067043
   Coding: 111000

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist (J500)       Labels:| 5Q0-909-144.clb
   Part No SW: 3Q0 909 144 M    HW: 3Q0 909 144 L
   Component: EPS_MQB_ZFLS  507 5082 
   Coding: 910A0000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_SteerAssisMQB 015157
   ROD: EV_SteerAssisMQB_015.rod
   VCID: 3C21C91026EB379BF7A-8068

No fault code found.

-------------------------------------------------------------------------------
Address 47: Sound System (J525)       Labels:| 5Q0-035-456.clb
   Part No SW: 5Q0 035 456 A    HW: 5Q0 035 456 A
   Component: MIB2_lite_amp H40 0200 
   Revision: 00000001    Serial number: VWZ8Z1KMD04TGWK
   Coding: 2200000000AAAAAA000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_AMPMst12C1Gen2ALPI 001003
   ROD: EV_AMPMst12C1Gen2ALPI.rod
   VCID: 2E05F358E097D50B49E-807A

No fault code found.

-------------------------------------------------------------------------------
Address 4B: Multifunc. Module (J745)       Labels:| 3Q0-907-338-V2.clb
   Part No SW: 3Q0 907 338 C    HW: 3Q0 907 338 C
   Component: FCM MQB Low   002 0345 
   Serial number: 03031910800062
   Coding: 000000050900161206710F01020000000000000000000000000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_MultiModulContiVW48X 002006
   ROD: EV_MultiModulContiVW48X_002_VW37.rod
   VCID: 3537DC3405C1E6D3084-8060

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387)       Labels:| 5QX-959-X92-52.clb
   Part No SW: 5Q0 959 592 F    HW: 5Q0 959 592 F
   Component: TSG BFS001 0287 
   Serial number: YE007SBM0734C
   Coding: 003E13208000040000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DCU2PasseSideMAXHKLO 001010
   ROD: EV_DCU2PasseSideMAXHKLO_VW37.rod
   VCID: 43D3B2EC5B154863B60-8016

   Rear Passenger Door Control Module:
   Subsystem 1 - Part No SW: 5Q0 959 812 D    HW: 5Q0 959 812 D  Labels: 5QX-959-81X-V1.CLB
   Component: FOND_FHSG_PSG  006 0007
   Serial number: 00000000000027940268
   Coding: 091000

No fault code found.

-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-STD2.clb
   Part No SW: 3Q0 035 876 B    HW: 3Q0 035 876 B
   Component: MU-S-NS-US    853 0890 
   Serial number:               
   Coding: 027310020000000041220002001808009F0507F401200405C6
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_MUStd4CDELP 001001
   ROD: EV_MUStd4CDELP_VW26.rod
   VCID: 3333E22C0BB5F8E3260-8066

   Display and control head 1 for information electronics:
   Subsystem 1 - Part No SW: 5G6 919 605 D    HW: 5G6 919 605 D
   Component: ABT_Std-2_Nav  H52 8130
   Serial number: VWZ6ZJW0601098     

   Data carrier:
   Subsystem 2 - Part No SW: 5NA 919 866 E    HW: -----------
   Component: NAR 2018/19  --- 0810
   Serial number: --------------------

1 Fault Found:
0020 - Tuner for Satellite Radio
          B11CF 53 [009] - Deactivated
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 113
                    Mileage: 43026 km
                    Date: 2023.01.15
                    Time: 09:37:57

                    Voltage terminal 30: 14.9 V
                    SDARS_tuner_status_2-Satellite radio antenna status: electrically OK
                    SDARS_tuner_status_2-Channel selection for satellite radio: 0
                    SDARS_tuner_status_2-Audio Signal: available.
                    SDARS_tuner_status_2-Antenna current: 105 mA
                    SDARS_tuner_status_2-Reception quality: weak_signal
                    SDARS_tuner_status_2-Satellite radio tuner: pre-activation status: 07
                    SDARS_tuner_status_2-Satellite radio tuner: pre-activation value: 07


-------------------------------------------------------------------------------
Address 75: Telematics (J949)       Labels:| 5QE-035-285.clb
   Part No SW: 5QE 035 285 A    HW: 5QE 035 285 A
   Component: OCULowMQBUS   009 0570 
   Coding: 02730002C2821A017F1E06020000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_OCULowMQB 001006
   ROD: EV_OCULowMQB.rod
   VCID: 43D3B2EC5B154863B60-8016

No fault code found.

-------------------------------------------------------------------------------
Address A5: Frt Sens. Drv. Assist (R242)       Labels:| 3Q0-980-65X-A5.clb
   Part No SW: 3Q0 980 654 H    HW: 3Q0 980 654 A
   Component: MQB_B_MFK     H09 0272 
   Serial number: 28091815P20759
   Coding: 0003070000000201002213548150490084000E200120
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_MFKBoschMQBB 001001
   ROD: EV_MFKBoschMQBB_001_VW36.rod
   VCID: 3C21C91026EB379BF7A-8068

No fault code found.

-------------------------------------------------------------------------------
Address A9: Struct. Borne Sound (J869)       Labels: 4H0-907-159.clb
   Part No SW: 5G0 907 159 D    HW: 4H0 907 159 A
   Component: SAS-GEN 2     H07 0001 
   Serial number: 190115201812
   ASAM Dataset: EV_SoundActuaGen2AU64X 003010
   ROD: EV_SoundActuaGen2AU64X.rod
   VCID: 2F3BEE5CE79DDC03428-807A

No fault code found.

-------------------------------------------------------------------------------
Address D6: Light Ctrl Left 2 (A31)       Labels: 7PP-941-572.clb
   Part No SW: 7P5 941 572 A    HW: 7P5 941 572 A
   Component: LED1L         H06 0002 
   ASAM Dataset: EV_LEDMinMaxL_KEBODAVW481 001003
   ROD: EV_LEDMinMaxL_KEBODAVW481.rod
   VCID: 392FD00429D902B3ECC-806C

No fault code found.

-------------------------------------------------------------------------------
Address D7: Light Ctrl Right 2 (A27)       Labels: 7PP-941-572.clb
   Part No SW: 7P5 941 572 A    HW: 7P5 941 572 A
   Component: LED1R         H06 0002 
   ASAM Dataset: EV_LEDMinMaxR_KEBODAVW481 001003
   ROD: EV_LEDMinMaxRKEBODVW481.rod
   VCID: 392FD00429D902B3ECC-806C

No fault code found.

End----(Elapsed Time: 01:47, VBatt start/end: 11.9V/11.9V. VIgn 11.9V)-----
 
   #2  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
63,129
Reaction score
43,446
Location
USA
VCDS Serial number
HC100001
Hi and welcome.

I believe the radar alignment should still be good.
The radar itself doesn't think so. It has alignment faults.

-Uwe-
 
   #3  

skwishst

Verified VCDS User
Verified
Joined
Jan 15, 2023
Messages
5
Reaction score
1
Location
New Jersey, USA
VCDS Serial number
C?ID=44351
Thanks @Uwe. However, in the thread I referenced, @MK7.5 talks about the same misalignment faults (although never posts them) and @downtime talks about "Now if you clear the dynamic values and go to basic settings and execute reset personalization settings. It will clear the misalignment error and restart the dynamic calibration. DO NOT change the static values.". Finally, @AINils helps him to do this. I would like to try this same clearing of personalization settings before I pay too much for an alignment but I am unclear how. It would be great if I could get some help with that. The radar is firmly in position, I have not had any front end bumps and have never removed grille or bumper so I would be surprised if it was really out of alignment.
 
   #4  

skwishst

Verified VCDS User
Verified
Joined
Jan 15, 2023
Messages
5
Reaction score
1
Location
New Jersey, USA
VCDS Serial number
C?ID=44351
@MK7.5 got back to me and helped out. I was able to finally clear the error codes and now everything is working again. In the end it does not look like there was any alignment issue rather just stuck error codes. So glad the dealer did not get money from me unnecessarily!
 
   #5  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
63,129
Reaction score
43,446
Location
USA
VCDS Serial number
HC100001
@MK7.5 got back to me and helped out. I was able to finally clear the error codes and now everything is working again. In the end it does not look like there was any alignment issue rather just stuck error codes. So glad the dealer did not get money from me unnecessarily!
It would be appreciated if you would post exactly what fixed this.

-Uwe-
 
   #6  

skwishst

Verified VCDS User
Verified
Joined
Jan 15, 2023
Messages
5
Reaction score
1
Location
New Jersey, USA
VCDS Serial number
C?ID=44351
sure, from @MK7.5 who I believe got it from @AINils I ran this script in VCDScripter

StartVCDS()
OpenUnit("13")
EnterEngineerSession()
LoginToUnit("20103")
ChangeAdpChannel("IDE11924-MAS13427","0.00")
ChangeAdpChannel("IDE11924-MAS13428","0.00")
ChangeAdpChannel("IDE11924-MAS13429","0.00")
ChangeAdpChannel("IDE11924-MAS13430","0.00")
ChangeAdpChannel("IDE08936","0.00")
ChangeAdpChannel("IDE09906","0.00")
CloseUnit()

when it was done, my error codes were gone and I was able to use my ACC again. There was an error box that came up I think for the EnterEngineerSession() but it did not impact anything.

Really appreciate the help I got since this was driving me nuts!
 
  • Like
Reactions: Uwe
   #7  

AINils

VCDS Distributor
VCDS Distributor
Joined
Apr 3, 2020
Messages
1,640
Reaction score
1,566
Location
Germany (AIB)
VCDS Serial number
C?ID=56975
Will publish these script at some time in our wiki. But need some more security to safe the idiots which aren't really know what happening
 
   #8  

skwishst

Verified VCDS User
Verified
Joined
Jan 15, 2023
Messages
5
Reaction score
1
Location
New Jersey, USA
VCDS Serial number
C?ID=44351
@AINils sorry if I put this out there prematurely. The one thing I did not understand was that if I selected one of the channel adaptations from the drop down like "IDE11924-MAS13427" I would get an error something to the effect that it was not available. But searching for it in the input box allowed it to run in the script. That is why when I was doing it manually, I could not get it to work.
 
   #9  

AINils

VCDS Distributor
VCDS Distributor
Joined
Apr 3, 2020
Messages
1,640
Reaction score
1,566
Location
Germany (AIB)
VCDS Serial number
C?ID=56975
These Adaption channel are only available during dev session. In standard diagnostic session these aren't available to modifiy
 
   #10  

LouisAMS

Verified VCDS User
Verified
Joined
Sep 5, 2022
Messages
65
Reaction score
7
Location
England, UK
VCDS Serial number
C?ID=518101
These Adaption channel are only available during dev session. In standard diagnostic session these aren't available to modifiy
What does that mean?
 
   #11  

AINils

VCDS Distributor
VCDS Distributor
Joined
Apr 3, 2020
Messages
1,640
Reaction score
1,566
Location
Germany (AIB)
VCDS Serial number
C?ID=56975
It means these "angle" adaptions are only visible in Developer Session in diagnostic, but not in Standard Diagnostic.
 
   #12  

DASGTI

Verified VCDS User
Verified
Joined
Dec 10, 2019
Messages
11
Reaction score
9
Location
Canada
VCDS Serial number
C?ID=269988
sure, from @MK7.5 who I believe got it from @AINils I ran this script in VCDScripter

StartVCDS()
OpenUnit("13")
EnterEngineerSession()
LoginToUnit("20103")
ChangeAdpChannel("IDE11924-MAS13427","0.00")
ChangeAdpChannel("IDE11924-MAS13428","0.00")
ChangeAdpChannel("IDE11924-MAS13429","0.00")
ChangeAdpChannel("IDE11924-MAS13430","0.00")
ChangeAdpChannel("IDE08936","0.00")
ChangeAdpChannel("IDE09906","0.00")
CloseUnit()

when it was done, my error codes were gone and I was able to use my ACC again. There was an error box that came up I think for the EnterEngineerSession() but it did not impact anything.

Really appreciate the help I got since this was driving me nuts!

This worked perfectly for me for the following module on a 2020 e-golf:

Code:
Address 13: Auto Dist. Reg (J428)       Labels:| 5Q0-907-572-V2.clb
   Part No SW: 5Q0 907 572 P    HW: 5Q0 907 572 J
   Component: ACC BOSCH MQB H11 0682
   Dataset Number: V03935290LZ 0001
   Coding: 7D0000C159FFC728949C810580400600000000000000000014
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ACCBOSCHVW416 002008
   ROD: EV_ACCBOSCHVW416_002_VW37.rod
   VCID: 44D14F259E1C28FA6B3-8010

I was attempting to resolve this error (C1103):
gsACrPc.png

The only part that bothers me is that I wasn't able to run to procedure without downloading VCDScripter. I wish the instructions were available for VCDS to enable engineering mode to do it without resorting to using a third party software.

@AINils do you need to run "reset personalization settings" after running the script? I didn't and everything seems fine, but I wanted to double check.
 
Last edited:
   #13  

Vdub

Verified VCDS User
Verified
Joined
Dec 18, 2016
Messages
1,019
Reaction score
626
Location
Netherlands
VCDS Serial number
C?ID=57533
i have used the script a few weeks ago on a Golf 7.5 and worked! Going to try it on a Passat also after my vacation.
 
   #14  

AINils

VCDS Distributor
VCDS Distributor
Joined
Apr 3, 2020
Messages
1,640
Reaction score
1,566
Location
Germany (AIB)
VCDS Serial number
C?ID=56975
This Script ist only working in MRRevo14f ACC with Part No
3QF 907 572 H or Higher
5Q0 907 572 H or Higher

All other ACC need different solution!
 
   #15  

MasterTommy

Verified VCDS User
Verified
Joined
Dec 28, 2016
Messages
1,003
Reaction score
695
Location
Amsterdam
VCDS Serial number
C?ID=295586
I'd put money on the fact that VW will, or already has released a software update with a TSB if this is indeed a common fault? Kudos to you @AINils for this fix though.
 
   #16  

Vdub

Verified VCDS User
Verified
Joined
Dec 18, 2016
Messages
1,019
Reaction score
626
Location
Netherlands
VCDS Serial number
C?ID=57533
This Script ist only working in MRRevo14f ACC with Part No
3QF 907 572 H or Higher
5Q0 907 572 H or Higher

All other ACC need different solution!
OK,thx, i don't know the exact version but heard that customer already had an appointment at the VW Dealer tomorrow so it doesnt come...
 
   #17  

AINils

VCDS Distributor
VCDS Distributor
Joined
Apr 3, 2020
Messages
1,640
Reaction score
1,566
Location
Germany (AIB)
VCDS Serial number
C?ID=56975
OK,thx, i don't know the exact version but heard that customer already had an appointment at the VW Dealer tomorrow so it doesnt come...
Okay if he change his mind, just post an autoscan and I can explain in your case
 
   #18  

Vdub

Verified VCDS User
Verified
Joined
Dec 18, 2016
Messages
1,019
Reaction score
626
Location
Netherlands
VCDS Serial number
C?ID=57533
(the Facelift)Passat came by (without appointment) last Tuesday, dealer didn't have time till somewhere in October, ran the script, error is gone, so again a happy Passat-driver..
Module was 5Q0 907 572 R
 
   #19  

need1morecar

Verified VCDS User
Verified
Joined
May 10, 2024
Messages
1
Reaction score
2
Location
North Carolina, USA
VCDS Serial number
C?ID=585309
I had the same issue as the original poster and the VCDS Scripter solution also worked for me on a 2019 GWS 4Motion S. Mine just stopped working about 15 miles after being parked in an airport lot for 3 days. It wasn't hit that I could tell, just adapted itself into hell it seems.
Hi,

I have the Front Assist Not available on my 2019 Golf R MK 7.5. It started after driving through heavy snow, ice and salt but there has been no bumping anything so I believe the radar alignment should still be good. I cleaned the whole car including the front emblem and radar unit behind it. Additionally, following this thread I went into module 13 (Auto Dist. Reg) and under basic settings executed the 'Reset Personalization settings' but got the message 'Not Running'. I did this with the engine running. It was not clear to me how to clear the dynamic values so maybe that is all I need if someone can help with that. I included the auto scan.

sure, from @MK7.5 who I believe got it from @AINils I ran this script in VCDScripter

StartVCDS()
OpenUnit("13")
EnterEngineerSession()
LoginToUnit("20103")
ChangeAdpChannel("IDE11924-MAS13427","0.00")
ChangeAdpChannel("IDE11924-MAS13428","0.00")
ChangeAdpChannel("IDE11924-MAS13429","0.00")
ChangeAdpChannel("IDE11924-MAS13430","0.00")
ChangeAdpChannel("IDE08936","0.00")
ChangeAdpChannel("IDE09906","0.00")
CloseUnit()

when it was done, my error codes were gone and I was able to use my ACC again. There was an error box that came up I think for the EnterEngineerSession() but it did not impact anything.

Really appreciate the help I got since this was driving me nuts!

I tried to make these adjustments manually in VCDS, but even in 'Engineer session' it didn't seem to let me, so the script seems necessary.

I did not get any errors and the fault cleared. Did a test drive and nothing new but I think the drive cycle is quite a bit longer than my drive so we'll see what happens after a week or so. Here was my original fault code...

Control Module Part Number: 5Q0 907 572 P HW: 3QF 907 572 A
Component and/or Version: ACC BOSCH MQB H11 0682
Software Coding: 2D00000101FFC728949C810500401600000000000000000004
Work Shop Code: WSC 00066 790 00235
ASAM Dataset: EV_ACCBOSCHVW416 002008 (VW37)
VCID: 44D15A524E14B74A33B-8010
1 Fault Found:
0267 - Sensor for Automatic Distance Regulation; Incorrectly Positioned
C1103 00 [00001001] - -
[FAULT_ALIGNMENT_NOT_OK]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 107
Mileage: 93522 km
Date: 2024.05.11
Time: 11:04:10
Control Module temperature: 47 °C
Voltage terminal 15: 12.1 V
Velocity_vehicle_reference: 0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s²
Status_ACC_System: ACC_reversible_error

The scan was originally from May but thanks to the fact that VCDS Scripter flags Windows Defender as a virus, and the work PC wasn't having it, it took a while to find a PC that I could 'sacrifice'.

Thanks for posting - saved me a trip to the terrible dealership in my area.
 
   #20  

AINils

VCDS Distributor
VCDS Distributor
Joined
Apr 3, 2020
Messages
1,640
Reaction score
1,566
Location
Germany (AIB)
VCDS Serial number
C?ID=56975
Script isn't neccessary for calibration with VCDS, just a helper for a easy job.
Changing session should be in SA as there was last time a macro for it. In german versin it was S23456 last time it tried it.

Use S23456 and you can set the adaption to "0.00" and dynamic calibration is done after 20-50km test drive
 
Last edited:
Status
Not open for further replies.
Back
Top