Search results

Hi I wanted to log some advanced measuring values on 5F using the HEX-NET, but I have come across an issue. I can log fine using VCDS on my laptop, here is an extract of what I was logging Sunday,07,February,2016,17:32:52:04069VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64...

Hi experts at Ross-Tech The Golf VII is available with auto hold, the one where when you come to a stop it maintains brake pressure via the ABS unit after you release the footbrake, until you accelerate again. (Not HHC). As I understand it, if you have ACC this means it will hold you...

Hi I'm considering getting a short (1m?) OBD2 extension cable for use with the HEX-NET in Infrastructure mode. I am finding that the location of the OBD2 port on the Octavia 3 means the HEX-NET gets a variable at best wi-fi signal, probably not helped much by the SmartGate wifi module under the...

With lots of options ...... Sunday,27,September,2015,19:42:29:16648 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 15.7.1.0 (x64) Data version: 20150904 www.Ross-Tech.com VIN: TMBKJ9NE0F0104172 License Plate: Mileage: 26050km-16186mi Repair Order...

Not my car, so don't know the spec Saturday,31,October,2015,15:35:55:16648 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 15.7.1.0 (x64) Data version: 20150904 www.Ross-Tech.com VIN: WAUZZZ8V6GA052459 License Plate: Mileage: 783km-486mi Repair Order...

Is there one published anywhere, can't seem to find it?

Hi guys Not sure if you are aware, but there are reports of menus disappearing from 5F on MIB2 units on the O3 after enabling some additional menu items. I haven't experienced it myself yet, but there are a couple of reports on Briskoda...

These are a straight swap for the originals, the wiring and connectors are the same. These are the adaptation channels that need changing on the BCM Adaptation Channel Standard Lights LED lights (1)-Leuchte20BR LA71-Lasttyp 20 13 - Bremsleuchten 34 - LED Bremsleuchten (8)-Leuchte20BR...

Hi Used 14.7.0 for the first time on a MQB platform today to code footwell lights as per the below http://www.briskoda.net/forums/topic/299424-octavia-iii-vcds-adaptations-tried-and-tested/?p=3792607 and it immediately generated a fault code that won't clear on 09 BCM 565764 - Program...

Hi I have both VCP and VCDS and there is a significant difference between the two in the way MQB platform support is implemented. With VCP, only one adaptation can be changed at a time, and the controller is reset (rebooted) in between each one. There is also a manual reset of a controller...

All, I have a thread running on Briskoda.net for MQB platform tweaks, the ones on Briskoda have been tried and tested on the Octavia III (5E). You can find the thread here http://www.briskoda.net/forums/topic/299424-octavia-iii-vcds-adaptations-tried-and-tested/ If anyone has anything further...