Search results

Can you post admap for this? Eg.: 17, 09. Thank you.

Nice. Is there a trick to reading the car (open hood or without ignition or other)? I tried it with VCDS but it was not successful. I see a list of ECUs in the Autosan section, but all the ECU answers are "cannot be reached", excepting 19-Gateway modul. After trying it with ODIS, it could read...

Hi, There is a Passat B8 with a strange electric problem. On the mornings the engine not start and there are a lot of warning symbols on the dash. In ignition and after 10 minutes later the car could start and works all the day until the next morning. Gateway electronic was replaced but...

Hello, I tried to activate the lane assist but it was not working. The A5 module coding is different like a Bosch camera. Friday,28,February,2020,16:48:54:64377 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version: 19.6.2.2 (x64) HEX-V2 CB: 0.4508.4 Data version...

Hi, I tried to activate high beam assist on a Passat B8 with LED2 headlamps. After coding the HBA, the symbol appeared on the instrument cluster. During driving the blue high beam symbol appearad on the instrument cluster but the headlamps didn't. After driving I tried to switch back the coding...

Hello, I can't read out a brand new 2019 Touareg. Only just gateway controller. What is the solution? Ignition was on (the engine not run) I lost a customer... Wednesday,20,November,2019,15:45:48:64377 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64(VirtualBox) VCDS Version...

Hi, I tried to coding the rain closing function but I got an error message. https://imgur.com/xMijbFF Saturday,31,August,2019,18:39:11:64377 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64(VirtualBox) VCDS Version 19.6.1.0 (x64) HEX-V2 CB: 0.4508.4 Data version: 20190529...

Hi, I would like to set up when the driver gets out from the car the doors lock automaticly. How can I do that? Wednesday,21,August,2019,17:10:22:64377 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64(VirtualBox) VCDS Version 19.6.1.0 (x64) HEX-V2 CB: 0.4508.4 Data version...

Hello, Why I couldn't do selective output test on (17) instrument panel? https://drive.google.com/open?id=1uzLsLfOaV3S9AAWkwVdPzrzYYjHJ4x9h I think this is a Session issue (suplier session or developer session), but why the VCDS couldn't run UDS session commands when I click the output test...

Hello, After retrofitting the trunk electric function basic settings of 6D module not working and the trunk door also not working. Autoscan: Wednesday,22,May,2019,19:19:31:64377 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64(VirtualBox) VCDS Version 18.9.1.0 (x64) HEX-V2 CB...

Hello. I tried this script: StartVCDS() OpenUnit("19") TestComponent("GW MQB",1) TestAdpChannel("Start/stop start voltage limit","12.1", 1) ChangeAdpChannel("Start/stop start voltage limit", "12.1") CloseUnit() but not working. This is the error message: Desired value is not...

Hello, I read out my and my friend car. The two car are similar but the 01: Engine ECU long coding a litle bit different. I would like two know what are the differences but the long code helper hide some bit. I am looking for for example what does the Byte5 Bit4 means. I copied the 2 long code...

Hi, Sometimes If I do an autoscan and I save it as a TXT and after I change some adaptation or coding on the car, this changes also save to this txt. I did the same way today but the log contains only the full autoscan and the coding and adaptation changes was not saved. What is the trick? How...

I would like to activate Emergency brake flashing via turn signals. Tuesday,11,December,2018,19:37:53:64377 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64(VirtualBox) VCDS Version 18.9.0.2 (x64) HEX-V2 CB: 0.4436.4 Data version: 20180927 DS296.0 www.Ross-Tech.com VIN...

Hello, I have two control module in my car which is red in autoscan. BB-Door Rear Drv -- Status: Not registered 0001 BC-Door Rear Pass -- Status: Not registered 0001 I cannot open these. What is the solution to reach these? Friday,16,November,2018,16:52:34:64377 VCDS -- Windows Based VAG/VAS...

Hello, In my new car the cruise control deactivates if I press the brake pedal but it does not turn off if I pressed the clutch. Is there any possibility to code something because my old car can do that (Octavia 2). Saturday,06,October,2018,07:12:01:35062 VCDS -- Windows Based VAG/VAS Emulator...