Search results

  1. W

    FEC/SWaP (Enabling APPCONNECT Apple/Android) in MIB unit possible to add codes with OBD11 and ODIS but not VCDS--- WHY?

    There is an important step that needs to be switched ON and Uwe can tell you how to do this, RT have asked that it's not published publicly. I had to ask for it too and then the process you are trying will work.
  2. W

    FEC/SWaP (Enabling APPCONNECT Apple/Android) in MIB unit possible to add codes with OBD11 and ODIS but not VCDS--- WHY?

    I don't have Odis so can't unlock but I think this is the missing step:- About IDE04331 - I mean, that this is for opening "possibility to transferring codes". This is not for entering that long installing code. If I remember, default is 00000000 and must be changed to FFFFFFFF before I can...
  3. W

    FEC/SWaP (Enabling APPCONNECT Apple/Android) in MIB unit possible to add codes with OBD11 and ODIS but not VCDS--- WHY?

    Sorry @Uwe I was rushing. I enter the security access code (not shown by VCDS) as 20103 and it is accepted. I then try IDE04330 SWAP file activation and I get a channel out of range message. I also looked at basic settings IDE04327-Activation on Swap and got the same error. So I can't upload...
  4. W

    FEC/SWaP (Enabling APPCONNECT Apple/Android) in MIB unit possible to add codes with OBD11 and ODIS but not VCDS--- WHY?

    So I have tried to do this but I keep getting channel out of range, can anyone help me please? Tuesday,03,May,2022,13:31:11:65061 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64 VCDS Version: 22.3.1.4 (x64) HEX-V2 CB: 0.4615.4 Data version: 20220407 DS337.0 www.Ross-Tech.com...
  5. W

    FEC/SWaP (Enabling APPCONNECT Apple/Android) in MIB unit possible to add codes with OBD11 and ODIS but not VCDS--- WHY?

    Just wondering if this has been looked at and will it become a feature on VCDS? Thanks
  6. W

    No Haldex function

    I have 2015 VW Tiguan with 80K on it and Matt at Haldexrepairs said any pump that has done more than 45K miles needs swapping out (commutator wears out). My haldex GEN5 pump showed no errors, lots of front wheel spin and no rear drive. Swapped out the pump and new oil, learn function run and...
  7. W

    T6 Start/Stop battery replacement

    http://wiki.ross-tech.com/wiki/index.php/Battery_Replacement
  8. W

    WANTED:- 5N2927137BCXSH

    Looking to retrofit the OFF ROAD button to my MK1 Tiguan Just putting it out there if anyone has one of these switches? 5N2927137BCXSH Thanks
  9. W

    HELP VCDS Not working

    Even left his address for all to see as well lol 😂
  10. W

    FEC/SWaP (Enabling APPCONNECT Apple/Android) in MIB unit possible to add codes with OBD11 and ODIS but not VCDS--- WHY?

    MMM I am not sure its a different camp as you are right VCDS is depriving dealers of charging us to get MODs done (most they would say can't be done) or even issues fixed for less which days of old were hidden or the knowledge was scarce but forums allow more sharing of data. This is great for...
  11. W

    FEC/SWaP (Enabling APPCONNECT Apple/Android) in MIB unit possible to add codes with OBD11 and ODIS but not VCDS--- WHY?

    So can this be achieved or does the functionality need to be added? It's a very cut throat world in this type of industry and portfolio of features Vs cost will always be an issue but at the same time you don't want to be left behind because another product can do more.
  12. W

    FEC/SWaP (Enabling APPCONNECT Apple/Android) in MIB unit possible to add codes with OBD11 and ODIS but not VCDS--- WHY?

    I think what people are saying is that it would be good to have the same features as your competition has, I think EOL functionality needs to be added or if it already exists then maybe some pointers on how to use/find it. I can see the SWAP file function in 5F but its looking for a 8 bit HEX...
  13. W

    FEC/SWaP (Enabling APPCONNECT Apple/Android) in MIB unit possible to add codes with OBD11 and ODIS but not VCDS--- WHY?

    Uwe, I have invested in HEX V2 so the S/N on my account is wrong (was old MicroCAN), mmm actually I see it has changed (was showing my old cable yesterday). Can it be done with HEXV2?
  14. W

    FEC/SWaP (Enabling APPCONNECT Apple/Android) in MIB unit possible to add codes with OBD11 and ODIS but not VCDS--- WHY?

    So can these codes be added using VCDS like OBD11? I think thats what @swenak is asking, replication of what is shown in the video using VCDS.
Top