Search results

  1. D

    Unable to connect in AP mode

    Hi, When my HEX-net is in AP mode (LED 2 is green), i cannot find my HEX-NET, when i log in to my router i can see that it has an IP assigned(192.168.2.7). When it is in Infrastructure (Red LED) i can connect to it. I've done a force reset (45 sec method) If i ping the hexnet via Windows...
  2. D

    16.8 update added an extra controller to my vehicle????

    Hey lads, Last week i updated my Hex-net to 16.8, all went well execpt for the fact that i now have a extra controle module. The "new" module is 0B secundair heating. When i check the gateway it is no where to be found on the list. I already reinstald 16.8 and removed older versions. When i...
  3. D

    coding highline rearview camera

    Hey Folks i have a 2013 Polo I have installed the highline European back up camera that pops out of the emblem. I have everything working when i put it in reverse the camera pops out but nothing shows up on the screen. I'm getting some fault codes saying that the module is incorrectly coded...
  4. D

    Wrong byte 18 options

    Hi, I'ver retrofitted a set of 6C full led headlights on my 6R Polo. They work great, yet the leds (mainbeam) go off after 10 secs. When i check Byte 18 of the BCM i have 5 options; 00 When a new BCM is installed this is the default 41 43 60 66 The code 66 is on a 6R wrong. Causing the MIL...
  5. D

    Full led retrofit

    Hi all, I've mounted a set Polo 6C full led headlights in my 6R. The are working like a charm. Ive testet different byte 18 codes, stock; 3AB0293F48E12400B3280FB07EEB9ED94FC0442F7E840040200000020000 With Bi-xenon 3AB0293F48E12400B3280FB07EEB9ED94FC0662F7E840040200000020000 And the LED...
  6. D

    ACC retrofit

    Hi lads, I have been working on this retrofit quite some time now. I know it is possible all i run in is the fact that VCDS wont let me reconfigure the ABS ECU The plan: Buy an ACC radar (PN: 7E937090) Buy an BCM from a T6 ( PN: 7E0 937 090) Buy a 6C MFSW steeringwheel, including the...
  7. D

    Missing long coding info

    Hi, Ive updated my hex-net to; CodeBlock V0.4321 FW version: 0.244 Dataset: 10000045 Vehicle VW Polo BlueGT 2013 1.4TSI ACT (CPTA), DSG Now i'm missing on all of the modules the long coding info, als i can not ad a new ecu if i where to do a retrofit. Sun,May,29,2016,15:38:08 VCDS Mobile...
Top