Search results

Thanks Uwe! I will give these a try and see what happens. Hope you had a pleasant Thanksgiving!

Heres an auto scan for clarity Thursday,24,November,2022,17:55:58:12942 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64 VCDS Version: 22.10.0.1 (x64) HEX-V2 CB: 0.4623.4 Data version: 20221026 DS344.0 www.Ross-Tech.com VIN: 3VV2B7AX9JM201421 License Plate: Chassis Type...

Hi all, I am currently performing an LED headlight retrofit to my 2018 Tiguan. I have the wiring all situated and none of the relevant adpmaps here are working for my configuration - I am thinking this might be NAR Tiguan specific. Turn signals and high beams do not work. If possible, could you...

Thank you @downtime for helping out! I am on the next step of performing adaptations for the headlights. I have found reference admaps on this site and changed leuchte channels (and any other channels relating to the headlights) according to the reference. So far, my right headlights performs...

It just so happens that one of my local Audi club friends has a VAS5054A cable that he let me borrow. I'm sending you a PM.

Thanks for this, it is hugely helpful! I agree, this retrofit is no easy task and it may or may not have been easier to swap over the wiring harness. I took the opportunity to take this on since my engine and trans was out of the car. It had major frame damage. I figured while everything was...

Thanks downtime, I appreciate your input. Glad to know that I am on the right path with this. Do you have any recommendations as to which tools will work? VAS or VagCan Pro, etc? Or is there a reputable remote service I could approach for this? Please advise if you can and thanks again!

Hey everyone, I'm currently rebuilding a wrecked 2018 NA Tiguan (BW2) and while the engine was out I decided to take on the laborious task of wiring the LED headlights the factory way. I pulled up ElsaWIN wiring diagrams and ran each wire where needed. I knew I had to source a new BCM, Range...

Thanks for your response. The original new to me 1K0 BCM coding is : 6D180A1A80272AC40088008570000D0440050086434D8D60648020200040 The factory 5K0 that came with the car had: AF380E3A882F3EC400080040710008C0494C5586535D0500E48420200040

Hi everyone, I've been a long-time lurker and received so much help over the years. It's my turn to ask for some help. I replaced my bumper with a GTI-style bumper that came with fog lights. I also bought a BCM from a 2012 GTI and installed it into the car to enable the fogs (my original did...