Search results

Thank you so much @Dana the coding is accepted and has worked with no errors, I have also recoded J527 as suggested by @Jef, but I have not been able to locate a physical cruise control stalk in this car, and E45 defective error has appeared after the codierung exercise, however the most...

thank you so much, car is coming back on Monday next week, I will recode and report back

all coding's accepted, but with control module incorrectly coded error,that does not go away Scan with coding 0011554 Friday,18,November,2022,13:01:57:40543 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 22.10.0.1 (x64) HEX-NET2 CB: 0.4623.4 Data version...

I recently purchased a 3VIN hex v2 from my friend around here and would like to know if it is possible to increase VINS to unlimited, instead of 10 VINS, then I can consider paying for transfer of ownership to my name as well

I recently purchased a 3VIN hex v2 from my friend around here and would like to know if it is possible to increase VINS to unlimited, instead of 10 VINS, then I can consider paying for transfer of ownership to my name as well

Thank you so much,I will try tomorrow and get back

client bought this Tiguan from auction, so previous repair history is not known, any hint towards the right ABS coding is highly appreciated Wednesday,16,November,2022,13:12:17:40543 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 22.10.0.1 (x64) HEX-NET2 CB...

Hello everyone, I got a golf mk7 variant 1.2tsi with lost ABS coding after what client claims was a botched rear brake pads replacement from another shop,both rear EPB motors were damaged and I had to source and replace,then I coded the ABS,did basic settings but a trailer stabilization error...

get a way of fixing system function test first,maybe it is clouding ABS judgement

your Kombi i your Kombi nstrument is the cause,common issue on MK6 and A3

...and that is why I am requesting if someone here can calculate the coding

Hello members,can someone suggest a coding to appease ABS,g85 and EPB to operate properly,I have a passat 2012 that had a failed engine and owner decided to retrofit BWA 2.0tfsi engine and gearbox from a donor 2006 passat at another shop,they tried to code ABS but so far yellow power steering...

Thank you so MUCH @Dana,your coding and adaption suggestions have worked a treat,the lights and G608 error have vacated and the owner is over the moon,let me attach the new scan here,thank you again Thursday,04,August,2022,07:42:09:40543 VCDS -- Windows Based VAG/VAS Emulator Running on...

I was told that to get rid of the error code,the other shop flashed the ABS control SW from 5N0 614 109 BD to 5N0 614 109 CN and updated Engine ECU software to 8368 from 2131,not sure how true this is

Monday,01,August,2022,16:18:02:40543 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 22.3.1.4 (x64) HEX-NET2 CB: 0.4615.4 Data version: 20220407 DS337.0 www.Ross-Tech.com Dealer/Shop Name: siLcVag garage Workshop Code: 001 48304 010485 VIN: WVGZZZ5NZDW088922...

Hello @Jef ,surprisingly this car is not equipped with the G608 sensor as per ETKA and PL24,it came from another workshop with wrong ABS coding that triggered wheel rpm errors ,I recoded the ABS to {0007471},previous coding was [0007200] as can be seen from the above autoscan, the errors went...

Tuesday,02,August,2022,16:08:57:40543 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 22.3.1.4 (x64) HEX-NET2 CB: 0.4615.4 Data version: 20220407 DS337.0 www.Ross-Tech.com Dealer/Shop Name: siLcVag garage Workshop Code: 001 48304 010485 VIN: WVGZZZ5NZDW088922...

I think this code is always caused by a restriction in the air intake system or gasoline leaking into engine oil,the easiest way to begin is check the cleanliness of the air filter,and smell your engine oil for gas vapors

kindly use the correct ABS control according to your VIN,Im not sure if 1K0 907 379BL is the correct replacement for 1K0 907 379AE,your previous coding of 1342401249240002C80F02EC92210092390800 should work if no tampering with cluster and engine ECU exists also worth reading this...

wonderful iichel, I am one of your secret admirers,Im currently having a difficulty with a 2012 polo that lost ABS coding,would you kindly repost the link to the XLS file,looks like the link at uk-polos.net expired or was revoked,thanks again for going the extra mile brother