Search results

  1. gooroo

    2010 Crafter 2.5d 80kw DPF warning light

    Hi, having a problem trying to get DPF warning light to go off. DPF is new and I have reset the DPF learned values, soot and ash are at zero, In order to get the DPF warning light to go off the vehicle must complete one successful regeneration. Temperatures, coolant, turbo, dpf and post dpf all...
  2. gooroo

    HEX-V2 install and use on additional PC/Laptop?

    Thanks chaps appreciate your time. Regards
  3. gooroo

    HEX-V2 install and use on additional PC/Laptop?

    Thanks stefdds, when I download and install on a new PC the software will "know" the serial number of my interface is already activated? On my first install it warned me I could only use it for a limited time until I must activate. Regards, Simon
  4. gooroo

    HEX-V2 install and use on additional PC/Laptop?

    The activation/registration process was more involved on the HEX-V2 than my older VCDS interface that I returned for a trade in. Before I could just download and install the software and use my interface, what is the score now, I have activated and registered the interface, do I need to go...
  5. gooroo

    Crafter 2010 CEBB 079906022G Redir Fail

    Thanks Sebastian, Uwe, appreciated. Regards.
  6. gooroo

    Crafter 2010 CEBB 079906022G Redir Fail

    Thanks Uwe, appreciated. Regards.
  7. gooroo

    Crafter 2010 CEBB 079906022G Redir Fail

    Is someone at Ross-tech looking into this? I see in this post https://forums.ross-tech.com/index.php?threads/12973/ that Sebastian offered to "whip up some documentation for this ECM" if supplied with the PLA/PLB files. Kind regards.
  8. gooroo

    Crafter 2010 CEBB 079906022G Redir Fail

    This controller was mentioned here in 2016 using VCDS 16.8.1, https://forums.ross-tech.com/index.php?threads/7547/ and here in 2018 using VCDS 17.8.1, https://forums.ross-tech.com/index.php?threads/12973/ but still redir fail today using 20.12.0 I need to carry out a DPF regeneration, could you...
  9. gooroo

    Audi A5 8F CCWA 2011 - Fault Codes 4698 4699 in engine - no other codes

    I have two fault codes listed in Engine, 4698 - Function Restriction due to Faults in Other Modules U1113 00 [039] - - 4699 - Function Restriction due to Faults in Other Modules U1113 00 [039] - - The ABS and TRACTION lights are on, faults will not clear Strange thing...
  10. gooroo

    2014 VW SCIROCCO 2.0TDI CFGC 177BHP

    Regards, gooroo Tuesday,25,October,2016,13:27:10:04425 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version: 16.8.3.1 (x64) Data version: 20161010 DS267.0 www.Ross-Tech.com VIN: WVWZZZ13ZEV010333 License Plate: Mileage: 16590km-10308mi Repair Order...
  11. gooroo

    6N0 Fabia II - 10938 - Engine Coolant Temp Sensor on Radiator Outlet (G83)

    Vehicle does not have G83, it has 3 pin switch in radiator and does have electric water pump. I see in coding for ECU it appears incorrect but if I try to change coding I get Coding Rejected, error 31. WSC, Imp and Equ are filled in. Any ideas please? Regards, Simon...
Top