Search results

😂😂

Well thanks for letting me know because one of my next moves was to take the gear actuator off my self and check the forks. But im thinking that I shouldnt do that now 😅

Damn, sorry to hear that. Thought maybe you could see something by the data i sent.

How can you tell?

So gearactuator is changed and no difference. Still same problem.

;SW:0CT-927-750-A HW:0CT-927-750-A --- Auto Trans ;Component:SQ100 H10 0013, Coding:000120 ;EV_TCMSQ101011,004010,EV_TCMSQ101011_004.rod ;Monday,30,May,2022,11:53:52:12676 ;VCDS Version: Release 22.3.1 (x64) Data version: 20220407 DS337.0 ;VCID: 46D557E7D824F57BB53-8012...

Agreed. I got it started and got it up to temperature as required on Vcds basic setting, and it starts the process but later on it stops and then says(stopped because of error) so im thinking that the clutch must be than worn so the actuator cant depress it fully so the gearactuator can adjust...

Is it possible that if the clutch is worn that it cant figure out to do basic setting on the gearbox actuator because it cant depress the clutch fully?

Monday,16,May,2022,15:03:48:12676 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 22.3.1.4 (x64) HEX-V2 CB: 0.4615.4 Data version: 20220407 DS337.0 www.Ross-Tech.com VIN: VSSZZZAAZDD310869 License Plate: AE15539 Mileage: 206500km-128313mi Repair Order...

Will do, i was in a hurry yesterday so that was what i got before i left the shop.

Hi Uwe, im not at the shop anymore so i only got that one scan and this other i will post in this thread. I will do the english version on monday. Fredag,13,Maj,2022,15:52:35:12676 VCDS -- Windows baseret VAG/VAS emulator - Kører på Windows 10 x64 VCDS version: NEZ 22.3.1.6 HEX-V2 CB...

Hello everyone. I have a question regarding one of my customers cars. The car came in this morning, drove well and all but the customer complained about the clutch slipping in some of the gears so i tried and adapt the clutch and tried to do a basic setting of the gears but after that it wouldnt...