Search results

  1. Ramp Rat

    A/C pressure readings?

    What should be the actual (meaning using old school manifold pressure testing) readings be for a 2006 Jetta TDI BRM? When testing with the VCDS it is showing about 186 psi (translated of course). But, I’m old school and like to see the actual readings using a physical testing with a manifold...
  2. Ramp Rat

    2006 Jetta Seat Memory?

    I’ve got a 2006 Jetta TDI BRM. I can’t get the driver’s seat memory to work. I’ve run the VCDS test on the buttons. When I press the no. 1 switch it shows activation. No. 2, No. 3 etc. Even the Memory switch shows activation. But, I can’t get the memory to set to the current seat location. Any...
  3. Ramp Rat

    2006 TDI BRM Hesitation

    I have a 2006 Jetta TDI BRM with a DSG transmission. (I posted my original Scan ). My wife was driving the car today and said that she experienced 2 hesitations when starting to move from a stop. Both times it was right...
  4. Ramp Rat

    Issue with VW MPG.

    I have a 2006 VW Jetta 1.9 BRM TDI. I’m having an issue with the on board computer displaying a different MPG than what a “real world” check shows. Meaning, after a 300 mile trip the display shows an average of 50 mpg but, using the odometer reading and gallons used to refill the tank, I get an...
  5. Ramp Rat

    Aux Heater Issue

    During the Auto Scan on my ’06 Jetta TDI BRM one of the issues is the Aux Heater is labeled defective by the OEM computer. But, with the VCDS I can make the Aux Heater work. Or, at least the VCDS says it’s working. I’ve attached a screen shot. (I think. First try at this)...
  6. Ramp Rat

    My First Post . . . My Auto Scan.

    Chassis Type: 1K (1K0) Scan: 01 02 03 08 09 0F 15 16 17 19 1C 25 36 42 44 46 52 56 62 72 7D VIN: 3VWDT81K86M742091 Mileage: 309870km-192544miles 00-Steering Angle Sensor -- Status: OK 0000 01-Engine -- Status: OK 0000 02-Auto Trans -- Status: OK 0000 03-ABS Brakes -- Status: OK 0000 08-Auto...