Search results

  1. Mike@Gendan

    USB-C Cables

    Is there a time limit on the post count threshold? :p:facepalm:
  2. Mike@Gendan

    USB-C Cables

    At the risk of dragging up an old thread, Ross-Tech now offer official USB-C cables for HEX-V2 and HEX-NET interfaces (with the thumbscrew to lock the other end in). We have just received stock of them in the UK this week: https://www.gendan.co.uk/product_VCUSBC.html Ross-Tech list them here...
  3. Mike@Gendan

    Windows 11

    I'd already been doing that :(
  4. Mike@Gendan

    Windows 11

    Yes, Win11 still has MSConfig. Safe mode - works OK! So that would suggest there's something else running that's interfering. Selective startup with all non-MS services and all startup items disabled still hangs :( I don't understand how it only affects V2, not HN though :confused:
  5. Mike@Gendan

    Windows 11

    Lenovo Yoga 510-14AST AMD A9-9410 8GB RAM Windows 11 Home, upgraded from Windows 10 via the Windows Insider Programme. Technically not up to the Win 11 specs as the CPU is not on Microsoft's list, but I've not encountered any other problems so far... (It's the PC we've used on Windows 10 at...
  6. Mike@Gendan

    Windows 11

    Hmm, we're seeing oddities here. With a HEX-V2: - VCDS hangs on the interface test (and never times out) - VCIConfig reports "Unable to open interface, it may be in use...", but then finds the S/N, and successfully updates the firmware (albeit repeating the error message during the updates)...
  7. Mike@Gendan

    General Corona Virus Discussion

    As opposed to a private company with no agenda, such as the paragon of virtue that is Fox News? State funded doesn't necessarily mean biased or corrupt 🙄
  8. Mike@Gendan

    General Corona Virus Discussion

    https://www.bbc.co.uk/news/health-58170809 Interesting scientific analysis of the Ivermectin Covid trials. TL-DR: While not specifically saying it doesn't work - - The studies saying it does tended to show clear signs of fraud (falsified / duplicated data) or biased controls. - The most...
  9. Mike@Gendan

    Steering assist ECU issue

    Once you've updated, take another Auto Scan. If you still have the problem, please post the full scan log (not just the gateway installation list as above) in here. Instructions on doing that are here: :thumbs: https://forums.ross-tech.com/index.php?threads/101/
  10. Mike@Gendan

    Unable to find .ROD file.

    Going in the post today :thumbs:
  11. Mike@Gendan

    Unable to find .ROD file.

    @topcat2006 We've dug out a (well-used) HEX+CAN interface. If you're willing to test that out on the Crafter and give feedback to Ross-Tech, we'll post that out on Monday to the same address you used for your HEX-V2 order. Is that ok with you?
  12. Mike@Gendan

    2021 VW Crafter - No interface available!

    Comparison tables now updated: https://www.gendan.co.uk/product_VCV23_9.html
  13. Mike@Gendan

    2021 VW Crafter - No interface available!

    @Ashields thanks - we may not have seen this without the tags. I'll get that table updated.
  14. Mike@Gendan

    3G

    Not really hearing more, but we've had 2 or 3 come up in the last year or 2. In the cases I remember the RHD mounting location seemed to cause the problem.
  15. Mike@Gendan

    3G

    Tight port surrounds do seem to be a right-hand-drive issue on some models. It's worth keeping a short extension cable in your toolbox.
  16. Mike@Gendan

    Anyone figured out how to run vcds on a raspberry pi is it even possible ?

    Are you running a cabled VCDS interface or wireless? If cabled, as both the interface and the computer are presumably powered from the same source, be careful you don't get a ground loop (or your interface will go pop)
  17. Mike@Gendan

    2020 Skoda Octavia 2.0 tdi technology compatibility

    Make sure it's someone with a (genuine) HEX-V2 or HEX-NET then, as 2019-on models aren't supported by the previous generation interfaces (HEX+CAN, Micro-CAN etc.)
  18. Mike@Gendan

    A Sad Day

    A very sad day. As a Brit (at least I assume that's the reason), I only ever understood about 60% of what Jack posted, but what I did manage to grasp was usually insightful or entertaining. The forums (and his family & friends) have lost a big character :(
  19. Mike@Gendan

    Verified not quite verified!

    Cloud registration is for using a HEX-NET with VCDS-Mobile in infrastructure mode, where a lot of the advanced functions go though the VCDS-Cloud server. It's not related to the forums. You need to see this: https://forums.ross-tech.com/index.php?threads/2601/
Top