Search results

  1. grant@gendan

    Mechatronic Replacement 2016 A6

    Hi all, Please can you help? A workshop using a VCDS HEX-NET is struggling with a mechatronic unit replacement. There were faults which could not be fixed on the old unit and after fitting a new unit (from Audi and ordered by VIN), there are still faults present which can't be cleared and...
  2. grant@gendan

    Can't access any module selected

    The OP is still unable to connect to any system directly. The interface is a HEX-V2. At our suggestion, he tried using the 'Bypass CAN init' option but that hasn't helped. I figured it's a 7H Transporter, so most modules won't be running CAN. Selecting this option generates the following error...
  3. grant@gendan

    VCDS blocked from 2021?

    VAG are introducing Security Gateways on some new models. Fiat, Chrysler and Alfa introduced these in 2018 and I'm sure others will follow. These require an authentication code from VAG servers to allow anything other than EOBD/OBD-II diagnostics. I believe this is something Ross-Tech are...
  4. grant@gendan

    A4 2.7 tdi rough idle and loads of smoke.

    Might be worth installing the latest version of VCDS too: VCDS Version: Release 20.4.2 Data version: 20200730 DS317.0 VCID:224B5F8FFDCFF89625-8076 Here's a download link: https://www.ross-tech.com/vcds/download/current.php
  5. grant@gendan

    Bentley Continental 2008 - Remote Control Matching

    Thanks for replying. The remotes were working before the control modules failed and were replaced (apparently due to water ingress). I can only assume that changing the BCM has lost the remotes. There are 2 remotes and neither work anymore. We looked at Adaptations in 0x05 and from memory...
  6. grant@gendan

    Bentley Continental 2008 - Remote Control Matching

    Hi all, Please can you help? I'm trying to find the procedure to match Remote Control Fobs for this Bentley 3W. The keys work with the immobiliser and start the vehicle but the remote fobs do not work. Neither module 46 or 09 offer any adaptations for Remote Fobs. Module 05 is asking for a...
  7. grant@gendan

    Random Videos

    Oil change on 1999 Chevrolet Tahoe. Car stalled after overheating.
  8. grant@gendan

    AC Problem 2010 Jetta

    Thanks again for your help! A reply from my customer below: "Was getting around to changing the sensor. So seems the logical place to start We have 12v on pins 1and 3 and when we simulate the signal on 2 everything else fires up fans kick in and the expansion valve opens. We checked the...
  9. grant@gendan

    AC Problem 2010 Jetta

    Hi all, I am posting this on behalf of a customer. They are fighting to get the AC working on their Jetta. Thanks in advance for any help you can offer: About 4 weeks ago we charged the AC system and as of yesterday we checked and it was holding the gas (17.5 barg). When we turned on the AC...
  10. grant@gendan

    VW Crafter 2019 DASB

    Thursday,06,June,2019,22:54:26:40661 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8 x64 VCDS Version: 19.6.0.2 (x64) HEX-V2 CB: 0.4505.4 Data version: 20190529 DS308.0 www.Ross-Tech.com VIN: WV1ZZZSYZK9033659 License Plate: Chassis Type: SY-VN54 (3Q0) Scan: 01 03 08 09 13 15...
  11. grant@gendan

    2014 VW Caddy - ESP Function Test Activated

    Hi all, A colleague called in today with a 2014 VW Caddy. They had been trying to recalibrate the G85 Steering Angle Sensor after a geometry adjustment but had started the ESP Function Test by mistake. I managed to calibrate the Steering Angle Sensor successfully but cannot get the ESP...
  12. grant@gendan

    Adblue Warning 2011 Sharan

    Hi all, I am posting on behalf of a customer. They have an Adblue warning on their dash - A bottle symbol with 600 miles remaining underneath. The Adblue has been filled on the car but the warning will not clear. I have spotted previous similar threads mentioning ECU updates and NOX sensors...
Top