Search results

  1. S

    Golf 7 side assist retrofit

    Just finished installing and coding, but it says not working.. Guessing RTA is the problem, but how do I disable it? Mon,Jun,07,2021,10:54:23 VCDS Mobile: 0.4543 Data Version: 30000060 VIN: WVWZZZAUZEW111212 Scan: 01 02 03 05 08 09 10 13 15 16 17 18 19 2B 3C 42 44 47 52 55 5F 69 A5 VIN...
  2. S

    Audi A4 B9 2018 Black screen (boot loop)

    Screen only shows boot pic for a few seconds and then shuts off. Is this maybe a software problem? Wednesday,10,March,2021,11:06:42:21522 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8 x64 VCDS Version: 21.3.0.0 (x64) HEX-NET CB: 0.4543.4 Data version: 20210226 DS325.0...
  3. S

    Auto hold button lost function after ABS upgrade

    Coded ABS and EPB but getting no response from EPB. When I try to activate Auto Hold in cluster, it just reverts back to Always OFF! Wednesday,15,January,2020,17:35:48:07409 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8 x64 VCDS Version: 19.6.2.0 (x64) Data version: 20190930...
  4. S

    Passat B6 2007 retrofit ACC?

    Thinking of retrofitting ACC but unsure if it`s possible on this old car? These are the parts going in: Radar - 3C0907567M Stalks - 3C9953501BM EPB - 3C8907801E ABS - 3C0614109AF hope to only replace module? Does anybody have EEPROM flash file to share? Thank you in advance :)...
  5. S

    Passat b6 rear 230v socket wiring?

    Cannot find any information on where to connect pin 3 (on the 230v transformer) to the cecm. Found out that on golf it's F socket pin 4, but is that also correct for passat? Mine does not have start/stop, if that matters. Pin 1 12v Pin 2 ground Pin 3?
  6. S

    Retrofit rear camera A6 2017 MMI?

    I need some help with this project. Cannot find a complete kit anywhere because this is a FL and doesn't use the same camera module. Is CP going to be a problem retrofitting this? (if it's possible) Thank you in advance for any help :)
  7. S

    Audi A6 Allroad C6 4F Air Suspension calibration problem!!!

    Got a A6 with leaks on both rear (suspension), changed them on a 2-pillar lift. But I left with the car on the lift and when I came back the owner had lowered it, but not all the way down... Then he starts the car, take it out of JACK-MODE and removed the arms from the lift. The car is now...
  8. S

    Tiguan 2012 no DRL?

    Can anyone help me with this problem? The DRL does not light up anymore, softcode is original and no help from ODIS update from 0048 to 1048!?!? Tuesday,28,November,2017,21:59:13:07409 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86 VCDS Version: 17.10.0.2 Data version: 20171026...
  9. S

    Retrofit OEM reverse high camera on Passat B6 2006 estate?

    Apparently the camera with handle from 2008- does not fit, as it is to big to fit. Does anybody have partnumber for a highline camera that fits -2008 Passats?
  10. S

    Passat B6 2006 MFSW no horn

    Retrofitted MFSW and everything works but the horn. Is there some coding that i missed? The horn plug is connected to the ground-loop on the airbag. Monday,04,September,2017,21:17:01:07409 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86 VCDS Version: 17.8.0.1 Data version...
  11. S

    Passat CC (2010) ABS fault after Steering assistance flash

    So i had a fault code on (44) Steering assistance and the characteristics was 0, so i flashed 5N1909144R_1401_BP.sgo and character v074B2035N1. Now there is a fault on ABS and i also have this code on Address (44) Meas Blocks 08, CH 08, window 1 is fault code "2", (window 2) fault code "2" and...
  12. S

    j2534-1 Pass-thru or j2534-2 Pass-thru for VAG?

    Is j2534-2 needed for Body Control Reprogramming on VAG or could it be done with j2534-1?
  13. S

    Q3 retrofit APS+ but no OPS Settings?

    I need the long coding for: 5F-Information Electr. 01000600020151070833000103010000010000 To get the "Settings" to work (on RMC screen). After the scan (posted below) I found a scan in this forum, put it in my 5F and got the OPS to work (but the rest was a mess). Then I put the original code...
Top