Search results

  1. 0

    Stop/start VW TROC

    I am trying to disable the stop/start on my VW TROC. ( for off road use only honestly) Can gateway Adaptations Voltage limit for s/s Increase this to 12.1 V Do it Then get the pop up below. Which do I click? Also what is the 5F fault in scan? Autoscan below Adaptation Error This appears to...
  2. 0

    DSG no drive and misses 3rd gear

    New to the forum and need some help please. RS3 2016 8V. Booting it in manual. 1st to 2nd perfect. 2nd to third the revs hit the limiter then drop down slowly until finally the clutch fully engages then all ok. This only happens in 3rd gear.All other gears ok. This has happened 5 times in one...
  3. 0

    Basic Settings wont work

    Audi A3 2.0 tdi 170 ps BMN engine. I replaced my turbo ,just the central core but it came with the vane adjusting screw not set so I need to use Engine ,Basic Settings,Group 11(Charge Pressure Control) to cycle the turbo to reset the screw to give me 80 mbar change between vanes open and closed...
  4. 0

    Hello from Bolton U.K.

    New user of vcds.What a BRILLIANT tool.
Top