Search results

  1. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    hi , sorry jack , i don't understand ,I do not understand the subtleties of your answers and your language .... can you explain to me more clearly, sorry not to understand
  2. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    thank for help jack , Can you explain to me precisely the right method to validate the coding can you also tell me what your code (00188) corresponds to, and where and when I should use it
  3. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    I can remake a video, without doing anything, the coding disappears, I just show that it accepts the coding, that a matter of time, the g85 is not the cause ........ it does not is that the consequence, I have to solve the coding which jumps, the g85 will have no problem of calibration then I...
  4. A

    2010 Polo 1.2tdi engine coil light coming on immediately at start up

    i , i think a have same probleme , and the relay ecm is broken, intensitee of driver isn't ok , and regulator not working propely pressur too hight look fuse/cable, and replace relay ...possible platine fuse box motor next good luke
  5. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    yes, thanks for explaining, very difficult for me to discuss in english ....
  6. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    i don't understand ?
  7. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    yes, but lost coding, and error g85 next light on dash always flashing sorry , but how i can post video ?i don't how post it ( and very very bad english sorry for read me ...)
  8. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    hi , sorry , i don't understand, dtc of sensor speed is ok, g85 isn't possible when abs unit don't have coding first, he accepted, and i am speed for calibrate g85 is ok , but immediatly lost coding ,and calibrate is error i need to writte coding first, but i think abs unit look parts...
  9. A

    2004 Touareg ABS Module replacement not accepting coding

    hi, if you have any problem with the pump, the problem is on the aluminum parts, when you take it out open the motor and clean / or replace the rotor contact (brush) if you have to buy another part, you remove the aluminum parts and change it, your abs ecu is original, and has no coding .....
  10. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    is there no one who can help me?i need resolve this probleme now i am verified , it's possible to transfert this post in other section ?
  11. A

    How to get Verified

    hi , i send mail to your link , but i don't have answer , how i reselved this ? i need to verified my accompt, thank you
  12. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    hi all pepole ! thank for help, gateway don't have instalation liste , and helpcoding is : 1 auto trans (trough my 2001 and pq24 ibiza) 2 brake electric 4 airbag for vw transporter multivan 8 steerring aid only pq24 ibiza 2+4+8 =14 i think the coding is ok , but why he need to communicate to...
  13. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    yes it therefore leaves traces of replacement, I would like to see this on the gateway or on the other modules, what to do for the gate way? or who can tell me which modules can block the coding of the abs? what is the correct methodology to put this car in order? person specialist seat?
  14. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    I never trust the customer, especially with this kind of dtc, when I start a repair project, I first check if the customer seems honest, that the car is original with the original parts, when I check the car before replacing the abs unit, I looked at the unit, it is very dirty, dusty, so for me...
  15. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    Hello, yes, first, it doesn't seem normal to me, I think the abs is waiting for the gear selector and the 4 wheels, which are not present with vcds, no install list, I'm trying to figure out the coding but it's okay, i don't know how to change it Usually just check the box, but the no tab...
  16. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    Hi i repair g44, now i have just 2 dtc in abs same probleme , coding accepted , and 30s lost coding again nobody ever had this case? no idea to understand my problem? Could anyone tell me what could be causing this type of failure? Thursday,04,February,2021,19:10:22:56515 VCDS -- Windows...
  17. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    the coding is accepted, but 30s go out ...... no one has ever had the case where coding goes alone ?? nobody will have any hypothesis why he can go?
  18. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    thank for reply i loose lot of time on this car, when i see the problem, the sensor not present, when y remove whith used parts , this dtc come on, (2 month to go at me used parts, if possible used part broken, possible new probleme of sensor etc.... ) this dtc isn't the probleme for coding...
  19. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    Thursday,04,February,2021,11:31:19:56515 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86 VCDS Version: 20.12.0.1 Data version: 20201125 DS322.1 www.Ross-Tech.com VIN: VSSZZZ6LZ3R166710 License Plate: Mileage: 216490km-134520mi Repair Order...
  20. A

    IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

    hi pirate alarms ......lol but i need help , i don't need wrong answer i a m official always, 12 years a sale 450$ full ( two official first loose when burglary my business, and rosstech sales second, and blackliste the first ....), ....now , new interface ....1800€ seller french , and not...
Top