Search results

  1. D

    Help with Battery Adapatation

    Thanks for the advice. Yeah, I think it is a VW part number vs Audi part number, and the VW number isn't in the table you are referring to. I am hoping it is just a marketing thing from Autozone that accounts for the difference between the Ah values. That is the plan. Drive her for a while and...
  2. D

    Help with Battery Adapatation

    After Putting in the altered code as 000915105CF JCB 20250309DT (made up from [Coss-Ref# found online] [manf on battery] [date/letters] ) When I look at measuring block Group 018 in the CAN gateway I am seeing 13.7 V. Based on what I am seeing in others posting I thought would be more like...
  3. D

    Help with Battery Adapatation

    So I just changed the part number of the long code I am entering and it took it. Only problem is I the part number I switched to is listed for a betterywith 105aH. Battery I put in says it is a 100aH battery. (Both part numbers are listed as reference numbers for the linked battery. But do I...
  4. D

    Help with Battery Adapatation

    Here is a scan after all the old codes were erased Sunday,09,March,2025,11:43:43:57302 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version: 25.3.0.3 (x64) HEX-V2 CB: 0.4660.4 Data version: 20250301 DS365.0 www.Ross-Tech.com VIN: WA1DGAFE9FD030048 License Plate...
  5. D

    Help with Battery Adapatation

    Here is a scan after changing the battery. Sunday,09,March,2025,11:36:25:57302 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version: 25.3.0.3 (x64) HEX-V2 CB: 0.4660.4 Data version: 20250301 DS365.0 www.Ross-Tech.com VIN: WA1DGAFE9FD030048 License Plate: Chassis...
  6. D

    Help with Battery Adapatation

    D-n-Tyke AudiWorld Member 2015 Audi Q7 3.0T Replaced the battery in the ole girl today. Replaced the AutoCraft H8 with a Duralast Platinum H9. Install went smooth, until it came time to do the battery adaptation. Using the VCDS, and following their instructions (youtube link) I was able to get...
  7. D

    Initializing CAN-Bus gateway - 2007 Jetta MkV

    So I am trying to install a RCD330+ into our 2007 Jetta. After initially installing the radio I was able to turn it on without the key in the ignition. Its my understanding that this is a good sign that I will have the battery drain problem so I ordered up a new CAN-Bus gateway, currently have a...
Back
Top