Search results

hello all! Looking for any information on how to code out the auto start stop on mk8 gti as the battery voltage adaptation tweak is no longer available. Any and all help is greatly appricated!

follow up - just had to run seat occupancy adaptation again and everything went back to normal the seats work as should.

Wednesday,07,August,2024,17:40:26:36430 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64 VCDS Version: 24.7.0.0 (x64) HEX-NET2 CB: 0.4643.5 Data version: 20240715 DS356.3 www.Ross-Tech.com VIN: WAUJ8GFF8H1033896 License Plate: Chassis Type: FF-AU37 (5Q0) Scan: 01 02 03 05...

Hello all recent swapped in some diamond back super sport seats from a 2017 s3. I have gotten an airbag light and passenger occupancy issues aswell as cruise control malfunction to my understanding the airbag module will need to be recoded and I am assuming that will reset all of the other misc...

bump

Hello All! Currently looking to move forward on the process of swapping a pre facelift audi a3 steering wheel to a facelift version and adding the functionality of the dsg paddle shifters. So far the car already has been swapped with the new wheel with the paddle shifters installed. The button...

Voltages under MVB group 007 for terminal 30 read 11.4 constant, with ignition and when attempting to crank and voltage status actual fluctuates from 00000011 to 000001011 when attempting to crank. Channel 07 Voltage : (Terminal 30) : 11.40 v VOltage Status : : 00000011 -----> 000001011...

Channel 05-Acc/Start Auth, Adv Measuing Values

Note : Battery is 1 week old

Hello All, Looking to diagnose a no crank on a 3.2 07 A6. I have checked communication between Kessy and ECM as well as communication with starter relays, everything seems to be functioning on/off. My only concern is with Output Voltage to Terminal 50 when trying to crank only reads 10.6556v...

Hello All, I have recently fitted my a3 with macan calipers and the new pads do not have wear sensors and I have since unplugged them. I am looking for any insight on how to code this feature out or rather just completely off per say. Any and all help is great thank you!

Hello, I am posting to see if it is possible to retrofit the s3 lc onto my facelift a3 8v. The a3's do come with launch control however it for some reason is not able to produce the sputtering or fuel cuts you would hear on the stock s3's/golf r's. With that being said I do know they do have...

Update : Did all adaptations listed above and all abs and steering and various airbag codes including the annoying tmps malfunction that with the "eeprom malfunction" code that I was getting with the old abs pump have gone away. Updated autoscan pasted below only codes are related to turbo...

roger will do all of the various adaptations once brakes are bled and car is able to be on the road. as for the various airbag codes I am assuming due to the new module being out of a totaled vehicle, are there procedures that need to be followed to reset those codes or should they clear up once...

Thursday,17,August,2023,23:07:56:36430 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64 VCDS Version: 23.3.1.0 (x64) HEX-NET2 CB: 0.4631.5 Data version: 20230421 DS346.2 www.Ross-Tech.com VIN: WAUJ8GFF8H1033896 License Plate: Chassis Type: FF-AU37 (5Q0) Scan: 01 02 03 05...

Here is the latest autoscan I do not see the module coding fault anymore but now adaptation faults could they just need to be ran? If so how woudl one go about this? Would they will more than likely clear up or are these codes leaning toward something that would have not been an issue if the AR...

Thursday,17,August,2023,22:37:02:36430 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64 VCDS Version: 23.3.1.0 (x64) HEX-NET2 CB: 0.4631.5 Data version: 20230421 DS346.2 www.Ross-Tech.com VIN: WAUJ8GFF8H1033896 License Plate: Chassis Type: FF-AU37 (5Q0) Scan: 01 02 03 05...

just input the coding with car running here is autoscan before dtc clears. Thursday,17,August,2023,22:37:02:36430 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64 VCDS Version: 23.3.1.0 (x64) HEX-NET2 CB: 0.4631.5 Data version: 20230421 DS346.2 www.Ross-Tech.com VIN...

oh no thank you for the heads up i would've never known. ill give it a try and post auto scan.

Not opposed to the fee pm sent.