Search results

Yes I would just like help with the part I need for a retrofit the coding I would do it at vcds and no need for vcp since it's a QQ2 less assembly parts just to put these missing leds from above and dashboard Thank you

Hello community I come back to you I have all the information on my PR-code which is QQ2 but should I change the light fiber (the led fiber) or only the LED module? because the piece apparently does not change or the site does not sell them. The module will simply turn white light into color...

Ok thank you 🙏 for the info I'm going to do it the labelling gives nothing 👍

Sorry for the merge My question is how do I get a list of my car's PR codes for the light pack before taking the original parts? I can take 2 types of coins either QQ1 or QQ1+QQ2 Thank you in advance.

My Scan VIN: WAUZZZFY0XXXXXX License plate: Chassis type: FY-AU49 (8W5) Scanner: 01 02 03 08 09 15 16 17 19 22 29 36 39 42 44 46 52 5F 69 6C 6D 81 A5 AC BB BC AC D6 D7 VIN: WAUZZZFY0H2030241 Mileage: 96740km 01-Motor -- Status: OK 0000 02-Autobox -- Status: OK 0000...

Excuse me, can someone help me find out my option code for the ambient lighting? Is this possible with VCDS? I would like to change the white ambient lighting to the original color I look at my option plate but I cannot find the QQ1 or QQ2 option? Where is it? Thank you for your help.

Yes Uwe communicated the procedure to him it is exact

I understand in any case thank you 🙏 for your feedback cordially

I think he will have to look for the code "Active Test Gauge/Needle Sweep" It worked for me Audi Q5 fy.

Ok

Excuse me I hold a Q5 fy with white mood lighting Can I make it multicolor? it is only the underside of the door and leg lighting. The upper parts of the doors and dashboard are empty, the missing LEDs can be added. On the other hand, the others are present but only white lighting can this be...

Sorry in English 17 – Instruments] -> [Coding- 07] -> [Long Coding Assistant] Byte 1: Bit 0: Check "Active Test Gauge/Needle Sweep (Staging)"

Do long coding [17 – Instruments] -> [Codage- 07] -> [Assistant Codage Long] Octet 1 : Bit 0 : Cocher « Gauge Test/Needle Sweep (Staging) active »

MY scan : VIN: WAUZZZFY0XXXXXX License plate: Chassis type: FY-AU49 (8W5) Scanner: 01 02 03 08 09 15 16 17 19 22 29 36 39 42 44 46 52 5F 69 6C 6D 81 A5 AC BB BC AC D6 D7 VIN: WAUZZZFY0H2030241 Mileage: 96740km 01-Motor -- Status: OK 0000 02-Autobox -- Status: OK 0000...

I added the adblue level on MMI according to this procedure: Activate Adblue level display on MMI 5F ECU -> Adaptation -> Car gen 2 function adaptations -> Set adblue menu display active -> Adblue menu display on three high levels -> set active then reset MMI Everything is well displayed but it...

Sorry, I forgot I posted this question. Is there a coding for the ambient lighting or do I have to go through a retrofit?

Just for your information I was flashed the camera for the VZE and I installed lane assist and sign assist 👍 ?? 👌 ??

Just for your information I was flashed the camera for the VZE and I installed lane assist and sign assist 👍 ?? 👌 ??

Do I have to flash the A5 camera with a vcp?

Where do I first have to code my car light coding differently? thank you