Search results

Sorry a 3.0litre diesel Address 01: Engine Labels: 059-907-401-ASB.clb Part No SW: 4E0 910 402 G HW: 4E0 907 401 D Component: 3.0L V6TDI G001AG 0030 Revision: --H05--- Serial number: AUX3Z0H5352951 Coding: 0011973 Shop #: WSC 02313 785 00200 VCID...

I have a 2008 Audi A8 UK version and I have a burned valve. What is involved in removing the cylinder head? I have been told that you do not need to remove the chain or engine and been told by someone else that I need to. Can anyone let me know Barry

It is an Audi A8 2008 3.0 litre. UK spec. I have removed the injector to make sure the plug was putting the diesel out and it is working correctly. I have also changed the code for the injector. Do I have to do a pressure test or do I remove the rocker cover to check cam shaft or do i remove...

Dear sirs I had a bad injector on Number 4 cylinder. I repalced the injector but still have white smoke periodoctically at the rear. When the car is driving ther is no issue but at idle trying to turn the car is rattling like a old tractor engine. I have been told it might be a blown valve...

When the cars stops, you can hear the compressor dumping air.

Thanks for replying. Not sure how to install the link but I have atatched the auto scan below. It is giving the fault of the compressor overheating. I took the measuring blocks measure which are as follows; FL 30, FR -45, RL 19 and RR -27. The car will not level at all. Thanks in advance if...

Dear sirs My Audi a8 is sitting lower on one side and at the moment there is no faults on VAG. I am trying to reset the suspension but only stays in lower mode. It doesn't go into the second mode. When I go to number 2 for setting and go back to 1 it allows me to go through the suspension...

I have replace the EGR valve but didnt fix.

Dearsirs I have the following fault on my car and I have replaced several items but have not removed the DPF filter. I have tried the DPF cleaner in the fuel tank and also removed the Lambada sensor and put the DPF cleaning product in here also. The car seems to be running okay but a short...

Its an Audi A8 2008 model Sunday,03,July,2022,14:20:07:53286 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 21.9.0.2 (x64) HEX-V2 CB: 0.4555.4 Data version: 20210903 DS330.0 www.Ross-Tech.com Dealer/Shop Name: 011E90ECC8C0725A VIN: WVWZZZ1JZWW123456...

Dear sirs My rear door would not open from the outside for some time. When I unlocked the car you could then open from the inside and the car would open from both inside and outside until the next time I locked the car. I removed the lock to try and replace but the replacement was a different...

Yesi got the other issues sorted. Apparently the sensor was on the wrong way around on the rear

I have an 08 Audi A8 and there is no fault in the air suspension. However I have the option of automatic and sport mode in the central console, but when I am in the menu the car doesn't adjust the height. Previously the arrows would have come on to show if you were raising or lowering the car...

The rear door on my 08 Audi A8 will not open from ther inside or the outside. This has only happened this past week. When you engage the lock mechanism you can hear it engaging and disengaging but you still cannot open the door. Is there a way that I can get the door open? Barry

Yes, I have inspected the ride height sensors and all seems okay. You can drive at times for 30 mins before the suspension light comes on.

Does anyone have an update on the above?

Uwe I have also taken the following measurements. Group 04 FL 14mm, FR -8mm, RL -11mm and RR 3mm. Deviation from standard level. Absolute vehicle FL 125mm, FR 102mm, RL 125mm and RR 91mm. 010 was to allow me to turn on or off suspension. Barry

Uwe What are MVB's 004,005 and 010?

I have entered what values I could to allow me a vaild measurement. The measurements are at the moment are FL 425, FR 408, RL 412 and RR 380. I drove for about 30min and the yellow suspension light came on with the following code 01780 - Sensor for vehicle levelling. Is there a way that I...

does this coding work on a 2008 |Audi A8