Search results

The garage said they replaced it and checked all the wiring back to the abs unit , but that isn't looking correct m8 , they have missed something , l was only asked to code it as the original and replacement had no coding in

ok , the garage got car back to me , they fitted replacement, l entered coding login and put coding in and then basic setting and did steering angle and exited vcds turned off car and rescanned and coding is in there ( in picture ), but the garage was changing this because coding was missing and...

crazy this , it says code accepted and the code accepted and go out and back in and its back to 00000 again , same with original one too ?

thanks will try it ,, the lable is missing in the boot so wasn't sure on the brake size , even tried autel , launch and odis offline and wouldnt work

hi l have an old a4 here with replacement abs unit on, old and new have 00000 , l have tried every login l can find, some say ok and code is in unit then turn off and back on and 00000 is back ? can someone please tell me logging and right coding Monday,07,April,2025,12:57:31:42713 VCDS --...

Thanks for your help , fitted whole unit and coded in fine ,, had to add 2 zeros at the end but all basic setting done and back to customer

yes , looking back l shouldn't have been so fast to press buy it now lol , so this will just be a case of swapping coding and some calibrations , can l swap just the board over and leave valve body on ? thanks , l know fords don't always like being swapped

hi , l have a skoda coming for an abs unit . skoda no longer list this part , l have a used one but number at the end its slightly different , do you think it will still be ok ? original is Part No SW: 1K0 907 379 CE HW: 1K0 907 379 AE replacement is 1K0614517CE / 1K0907379AT was going...

this is my new coding will look in adaptions tomorrow 508724AD89A50A9524A49179A96710 508724AD89A50A9524A49179A16710 new l didn't see any options like the t6 has

Yea my drive is steep and if you want to edge forward A Little it locked and doesn't feel right , feels like a normal Van now with it off

sorted it , find this post and it worked

It's not the handbrake it's built into abs there's no buttons

does anyone know how to turn hill assist off , transporter t5.1 manual , l cant stand it Saturday,11,May,2024,11:45:10:42713 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 23.11.0.0 (x64) HEX-V2 CB: 0.4643.4 Data version: 20231027 DS351.0 www.Ross-Tech.com...

vcds and vaglogin SFD does it work ?

need to get back to the car to check , waiting on the garage to check if the battery in boot is charged or even in the car

was the 12v that was missing

AUDI Q7 TDI QUATTRO S LINE BLACK EDITION MK2 (4M) (Q7) VIN: WAUZZZ4M2KD034366 / Engine Code: DHXA hi , we have a q7 2019 registration , its have a new varta battery installed and programmed in but still not charging , this car was sitting in a sales lot for 6 months , when we got there battery...

try this m8 113B200D09260002881004EB901D0041310000 if not contact support by ecu

hi , which side is this sensor 2 ? in the uk , audi a6 c7 QUATTRO , thanks 1 Fault Found: 9459739 - Fuel Level Sensor 2 B1058 1B [008] - Resistance Too High Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status...

hi lads does anyone know the location of the sos unit on a 2020 transporter please might be called Online Connectivity Control Unit