Search results

okay maybe i am in the wrong category of the threads? I am just looking to get my sensors calibrated, and trying to get my cruise control back. I dont believe any of this due to the recent problems, but more so because cleared codes with my parking brake module or something in my ABS module. I...

Friday,14,March,2025,19:05:19:48745 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 25.3.0.3 (x64) HEX-V2 CB: 0.4660.4 Data version: 20250301 DS365.0 www.Ross-Tech.com VIN: WAUJ8GFF7H1034988 License Plate: Chassis Type: FF-AU37 (5Q0) Scan: 01 02 03 05 08 09...

Can you elaborate? I’m not too advanced with things like this. Where would you start?

Under CAN Gateway the only one i couldnt seem to find and uncheck was 31-Engine Other. However i did the rest and here is my scan Thursday,13,March,2025,19:26:10:48745 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 25.3.0.3 (x64) HEX-V2 CB: 0.4660.4 Data...

Is there any coding or low hanging fruit ideas that I can maybe start to try and eliminate some of these? Considering my sensors are positioned correctly (according to the shop)

Alright, so...I have a headache and a half guys. After quite a long wait, I finally got the money together and got a used engine (same model) for my car. Everything went smooth. Now however, i have plenty of faults. Most if not all of these codes were present BEFORE the motor swap, so that part...

Anything I can try? Any ideas?

Well that doesn’t sound very good. Yes it was crashed (hit a deer.) however it runs very well, well did run very well. And no I didn’t do a volt meter test. And now I cannot get it to run in order to do the test

So, I recently Bought a new battery because of my low voltage warnings, hoping it would take care of at least some of my problems, and ultimately it made it worse. I went under 19-Canbus and I did the four adaptions to teach the new battery. and within a day or two my car would not start. Worked...

Okay well where do I start? I just bought a brand new battery.

So I did check the connector…it looks clean., I’m going with the pump itself. Able to help with recoding Ecm for all my other faults?

Thank you I will try that today. As far as trying to reset my steering angle sensor and control module for electric parking brake missing calibrations and sensor for automatic distance regulation? I have the Hex v2 but I keep getting held up for access or error when I try

Is that alot to take in? -facepalm. Did I do it right?

Saturday,14,October,2023,00:31:26:48745 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 23.3.1.0 (x64) HEX-V2 CB: 0.4631.4 Data version: 20230421 DS346.2 www.Ross-Tech.com VIN: WAUJ8GFF7H1034988 License Plate: AJG1801 Mileage: 118807km-73823mi Repair Order...

Hey guys..I keep getting heated support pump..along with intermittent other faults. Including hood latch open (even thought it isn’t) help!

So I did a no no. I wiped out the coding where I shouldn’t have..and now I’ve gotten “parking brake malfunction” “ESC Malfunction” “Hillhold Assist unavailable” “Tire Pressure Malfunction” “Speed Control System Unavailable. Someone please help -Facepalm

So I have spark.. Compression test.. first 3 cylinders good..4 th is reading off the charts. Over double of the others. Everything I keep running in to seems like I’m running in to a blown head gasket. I keep adding coolant..it disappears after a little time and there isn’t anything leaking...

Leak down test and compression test. Can you please send me a link on what tool or tools I would need and the basics on how to perform? I would very much appreciate it

I have alldata..but not 100% sure how to navigate around it to find relays.

Okay I didn’t know that. So I replaced a coil pack and spark plug..still nothing. Is anyone able to tell me what relays do what..?