Search results

THIS DID THE TRICK!!! @Boki Ar @Uwe @Jef @JMR You have helped me through my first ABS Module Diag/Repair and cant thank you guys enough. My sister has her car back no abs related codes and i finally have my car back (2011 TDI) look forward to chatting going to post in the near future in regards...

Sorry for being Vague.. at first i thought my car wasn't taking my original code from my previous module but it ended up taking it (I believe i was doing something wrong at first) I also did the measuring block shenanigans, and ended up with only one ABS related code; 00003 - Control Module...

NVM, my coding was accepted and not reverting back to 0000's :DDD Now, I am ending up with 00003 code, and when i try to perform basic setting 025 I receive a 004 error display and does not display a range for me to apply pressure relating to. You all have helped me a lot and feel like im...

Having some issues with coding, error 22. Used previous coding. here is my new auto scan and my old one is on original post. Tuesday,15,April,2025,18:57:48:21676 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 25.3.1.1 (x64) HEX-V2 CB: 0.4671.4 Data version...

HELLO ALL. I recently had an abs module go bad and after extensive time and research, I finally have replacement module installed in car. questions I wanted to run by you all; 1. Should I do as much bleeding as I can before attempting to do anything VCDS related? 2. Is a pressure bleeder...

Have a 2011 Golf GTI DSG and had the ABS Module go out (Thanks to you all, I was able to check and confirm the issue being the module and not a power supply issue) and I'm at the point getting ready to buy a new one and wanted to ask questions as to what would be compatible? What would my best...

Hey Jef and others. Hope you all have been doing well. Wanted to keep you in the loop on my findings and other concerns/ things to address. I've read that thread at the bottom of your first response (Can I go with used parts? Maybe....) and started getting concerned in regards to sourcing a...

You rock!!! going to send some input your way: With key off, plug to ABS Module disconnected, testing with test light; Pin 31/32 (colors red/white and red/yellow)have power as they should (I believe) and pin 47 brown is constant ground as should to my understanding. My pin 8 black/purple...

I cannot thank you enough for giving me an idea as to where to start, i did some research last night when I was doing the scan and read something similar in regards to checking powers/grounds at the plug that connects to the module. I need to do further research as to what pins to check again...

I hope i did this right, any input will help me greatly. My sisters car gave me so many DTC'S, almost all of which make me wrap my head around something ABS related. Car is on the lift right now at my shop and heres what i decided to do before making an account here to share to the public...