Search results

Hello Someone else may know better, but I don't think you can clear this code. A fault in the servo or sensor can cause the ABS unit to set this code shortly afterwards and it needs the ABS unit replaced or repaired I think most of the usual module repair companies can fix the ABS unit. Here's...

Thanks Dana :) Best regards Derek

I've just had a customer call with this problem as well and I gave him the save/print file routine for a workaround until the fix Best regards Derek

Unfortunately, from the posts above it doesn't look like it's possible to change on this vehicle Best regards Derek

Hello Please post the full autoscan so we can see exact vehicle details and hopefully someone will be able to help you https://forums.ross-tech.com/index.php?threads/101/ Best regards Derek

Please post the full autoscan so we can see exact car details https://forums.ross-tech.com/index.php?threads/101/ Best regards Derek

Yes, that's correct. When you see a model listed like this, it means the cars that are indented (below and to the right) are similar electronically and use the same procedures Cruise Control Retrofitting for VW Polo (9N) based Models Seat Ibiza (6L) Skoda Fabia/Roomster (5J) < MY 2010 Best...

Hello Instructions for this are shown in the Wiki here so you should be OK, but if you need any help, please post the full autoscan and someone will help you https://wiki.ross-tech.com/wiki/index.php/Retrofitting#Cruise_Control_Retrofitting IMPORTANT. Run and save a full autoscan before you...

Have you ever scanned this car before? If you have, check the old autoscan for the ABS module coding If you have scanned it but didn't save the scan, have a look in the folder C:\Ross-Tech\VCDS\Scans and there should be a backup scan there Best regards Derek

Hello Do you have another laptop or PC you could put VCDS on temporarily to try the update on that? It could be a desktop as you won't need to be plugged into a car Best regards Derek

Hello Please post an autoscan so we can see what engine etc your car has, and also what you have changed or repaired on the car as some things may need basic setting, or adaptation https://forums.ross-tech.com/index.php?threads/101/ Best regards Derek

Is that the full autoscan after VCDS has finished? Please run another scan and see if the rest of the modules show up and post that For the lights, I'd first put all the original bulbs back in and clear the fault codes in 09, then recheck for fault codes to see if there's a problem with the...

Please post an autoscan as there are many different module combinations that could be on your car https://forums.ross-tech.com/index.php?threads/101/ Best regards Derek

If you run a scan with it powered up, do the other modules show up? Best regards Derek

Hello Please post a full autoscan so people know exactly what engine etc were looking at Best regards Derek

Ah, that's a shame. I guess like you said, the individual login must be different Best regards Derek

After you've put the VIN in and the main details of the vehicle are shown, click the PDF button down the bottom of that block, or scroll the box on the left down and you'll see the PR codes tab Best regards Derek

Are you sure it was Partslink24? They usually have the PR codes there Best regards Derek

Unless I'm reading that wrong, the original unit was coded without cruise control, but the parts catalogue says it has Adaptive Cruise Control which is how you've coded the new unit Does it definitely have ACC? Best regards Derek

Hello Please post a full autoscan as the full details of the car are needed to check coding The problem is probably coding related, so please also post the autoscan from when the old unit was fitted before any changes were made to the vehicle so we can see the original coding Best regards Derek