Search results

  1. A

    Is IDE 06141 not supported on all ECU/Injector types?

    Coding has been completed - VCDS acknowledges the correct injector in each cylinder. No. A fault remains with idle. Simply ‘moving on’ isn’t the answer and it certainly is not “easy”. It won’t remedy itself. By understanding if other versions of software do have the facility to perform this...
  2. A

    Is IDE 06141 not supported on all ECU/Injector types?

    Damn. Not good. I’ll post the log from after the software was updated today (and in the correct area! 😂) Please could you direct me to where within the log, the version is listed?
  3. A

    IDE 06141 Not Available?

    Hi all, I'm trying to figure out if this is an issue with VCDS or, the vehicle ECM software just doesnt permit this function (IDE 06141 - Adapting injector minimum deviation quantity) for whatever reason? Perhaps its a function bespoke to 1.6 Diesels and the 2.0 is not covered? I've had the ECM...
  4. A

    Is IDE 06141 not supported on all ECU/Injector types?

    Thank you Bruce, Log posted above. Is the general opinion that the 'dieselgate repair' software must be flashed to the ECU to enable this function? Are there multiple versions and, are there versions to go for or avoid? Thanks again!
  5. A

    Is IDE 06141 not supported on all ECU/Injector types?

    Please see log below: Chassis Type: 2K-VN35 (7N0) Scan: 01 03 08 09 10 15 16 17 19 25 42 44 46 52 56 VIN: WV2ZZZ2KZBX256191 Mileage: 163580km-101643miles 01-Engine -- Status: Sporadic communication error 1000 03-ABS Brakes -- Status: Malfunction 0010 04-Steering Angle -- Status: OK 0000...
  6. A

    Is IDE 06141 not supported on all ECU/Injector types?

    Hi all, Recently purchased VCDS having used it ‘back in the day’ when measuring blocks made everting a little simpler! Damn UDS! What prompted me to buy was the ability to reset the ‘injector minimum deviation quantity’ (IDE 06414) so that the ECU understands that injectors, although...
Back
Top