Search results

  1. D

    RANDOM NO START

    I had more issues, the car started running very rough. I ordered a higher quality coil pack. When I installed the new one I saw one of the packs had opened up and something was coming out of it. It was only three weeks old.
  2. D

    RANDOM NO START

    Tuesday,18,October,2022,17:52:32:11174 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 22.9.0.0 (x64) HEX-V2 CB: 0.4623.4 Data version: 20220830 DS341.0 www.Ross-Tech.com VIN: WVWYH63B63E016688 License Plate: Chassis Type: 3B (3B - VW Passat B5 (1997 >...
  3. D

    RANDOM NO START

    This is what I installed, it has a 5 year guarantee. There are more expensive ones listed on Rockauto. I have had good luck with other parts I have purchased from them.
  4. D

    RANDOM NO START

  5. D

    RANDOM NO START

  6. D

    RANDOM NO START

    I will double check all connections. So should I put a Volkswagon coil pack in?
  7. D

    2003 Passat 2.8L Temp Sender

    Thank you for the kind words. I felt about 2 inches tall when I stuck my finger in and an O-ring jumped on it! Funny how the guys that could see it didn't say anything while I was struggling with it....Now onto the reason I replaced it. I'm trying to narrow down a random no start.
  8. D

    RANDOM NO START

    This is after I put the temp sensor in and it was driven a few miles.
  9. D

    RANDOM NO START

    Tuesday,04,October,2022,19:00:07:11174 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 22.9.0.0 (x64) HEX-V2 CB: 0.4623.4 Data version: 20220830 DS341.0 www.Ross-Tech.com VIN: WVWYH63B63E016688 License Plate: Chassis Type: 3B (3B - VW Passat B5 (1997 >...
  10. D

    2003 Passat 2.8L Temp Sender

    No I couldn't.
  11. D

    2003 Passat 2.8L Temp Sender

    Can you tell by the pic that there is an oring in there?? When I pulled the old sensor it was a struggle and when it was out the oring was still in the housing. I got a long screwdriver to pry it out and I thought it flew out because I couldn't see it anymore. When I felt around inside the tube...
  12. D

    2003 Passat 2.8L Temp Sender

    It looks good. I gave to get another oring tomorrow. The fact that I have the intake tube off I have renewed hope.
  13. D

    2003 Passat 2.8L Temp Sender

    Better pic with intake tube off.
  14. D

    2003 Passat 2.8L Temp Sender

    I will try to get photos. I have to take a day or two away from it or I might go insane, six days at it so far. I borrowed a vehicle to use in the mean time.
  15. D

    2003 Passat 2.8L Temp Sender

    The oring is out. The whole seems clean. I can get it in but I cannot hold it in which seems necessary to keep it down far enough for the clip to catch and hold it. I am going to attempt to take the aluminum? intake tube off that is above it even though no videos I have watched shows them doing...
  16. D

    2003 Passat 2.8L Temp Sender

    Well, this just isn't working. I can get it in but it takes some pressure to hold it down. When I let go it pops up. I have struggled with long tools trying to hold it down and I have now ruined the switch. I wonder if I should take that intake tube above it off? If i could hold it with one hand...
  17. D

    RANDOM NO START

    I have been struggling trying to install the new temp sensor since Sunday. I don't know what I'm doing wrong....I cannot get it down far enough for the clip to grab it. I haven't had a car for days now.
Back
Top