Search results

  1. B

    Classifieds/Parts for Sale?

    Okay, thanks for the info!
  2. B

    Classifieds/Parts for Sale?

    Hi, I am wondering if there is a space for/is it allowed to post about genuine parts that one is interested in selling. If it is, what is the protocol? If not, sorry I asked! Thanks!
  3. B

    Resolved Help with Codes - New to VCDS

    I realized that it has been a long time since I last posted what I thought my issue was and I figured I'd update with the resolution in case it's helpful to someone else down the road. I was correct in guessing that the clock spring/steering wheel control module was the culprit. I ordered the...
  4. B

    Resolved Help with Codes - New to VCDS

    Alright, so I called a dealership and had them look up the clock spring/steering wheel control module part number and they confirmed that it should be 5K0 953 569 AL instead of 5K0 953 569 BC, so I'll be ordering that and see if that fixes the issue. Interestingly, I went into the long coding...
  5. B

    Resolved Help with Codes - New to VCDS

    I'm thinking a dealership would be able to help with that if I gave them a call. I'll give that a shot and post back here what I find.
  6. B

    Resolved Help with Codes - New to VCDS

    Shoot, no, I wasn't aware of that. Is that something that can be reset by clearing codes, or does the sensor actually have to be replaced? How long will it go with the sensor throwing the code until it gives the "no start" message? I got a "no start" message when the DEF got low, but that went...
  7. B

    Resolved Help with Codes - New to VCDS

    Okay, I cleared all DCTs then went and cleared the codes in the steering wheel module. (I don't really care about the NOx sensor or whatever it thinks is wrong with the radio at the moment. The abs code is just a tpms sensor, the tires are fine). Clearing the steering wheel module got rid of one...
  8. B

    Resolved Help with Codes - New to VCDS

    I haven't cleared them yet. I'll do it this afternoon. I wanted to get a more expert opinion before doing anything. I replaced the whole cruise control switch/blinker stalk/wiper control switch on the steering column with a brand new one from RockAuto. Do you think it's possible that it's a...
  9. B

    Resolved Help with Codes - New to VCDS

    So I know it's been a while since I opened this thread, but I got around to replacing the wheel speed sensor a few weeks ago, which cleared the lights from the dash. I also just replaced the blinker/wiper stalk module with a brand new one, but the cruise control still isn't working. I did an...
  10. B

    Resolved Help with Codes - New to VCDS

    Thanks. Would I probably be right to assume that the issue with my cruise control is the stalks/switches on the steering column? I just want to be sure before I bother doing things like removing the steering wheel :p
  11. B

    Resolved Help with Codes - New to VCDS

    okay, I cleared the DTCs and took the car for a drive. The warning lights came back on on the dash, so I scanned again and got the following scan. I think I understand the Trans, ABS, and steering wheel fault codes, as well as most of the other ones which seem to indicate that they are a result...
  12. B

    Resolved Help with Codes - New to VCDS

    Okay, will do! Thanks for the tip on getting better looking data. I noticed mine didn't look quite right compared to scans I've seen on this forum, but I wasn't sure what I was doing differently. I'll get that fresh scan posted and we'll go from there.
  13. B

    Resolved Help with Codes - New to VCDS

    Hi everyone, I have a 2013 Passat TDI that's throwing some codes and I'd like some help figuring out exactly what I need to fix/replace to make them go away. Here's what I know: the CEL is on (NOx sensor), but I'm not too worried about that. The cruise control isn't working and has the little...
Back
Top