Search results

  1. TonyTouch

    06 Passat 2.0T FSI BPY engine status; malfuction

    How do I email you,by starting a new conversation?
  2. TonyTouch

    06 Passat 2.0T FSI BPY engine status; malfuction

    How do I match the ECU to the vehicle?
  3. TonyTouch

    06 Passat 2.0T FSI BPY engine status; malfuction

    ok so this are the codes i have left.. Thursday,10,November,2022,12:03:48:10190 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64 VCDS Version: 22.10.0.1 (x64) HEX-V2 CB: 0.4623.4 Data version: 20221026 DS344.0 www.Ross-Tech.com VIN: WVWAK73C06P024988 License Plate...
  4. TonyTouch

    06 Passat 2.0T FSI BPY engine status; malfuction

    Will do once I get to the shop but I think I'm down too 6 codes after I added #19 back to the Gateway list..JMR are you suggesting that I unplug all the sensors and plug them back? Should I do this with the ignition On or off?
  5. TonyTouch

    06 Passat 2.0T FSI BPY engine status; malfuction

    Ok now yall talking Chinese, I don't understand what you're talking about, what do i have to do to match this ecu to my vehicle so it can run?
  6. TonyTouch

    06 Passat 2.0T FSI BPY engine status; malfuction

    Ok what should I do now to make it stay on?
  7. TonyTouch

    06 Passat 2.0T FSI BPY engine status; malfuction

    i swapped the ECM and now it runs for 2 second and shut right off. what should i do so it stays running? also now is telling me that the VIN is not register since i swapped the ECM..
  8. TonyTouch

    06 Passat 2.0T FSI BPY engine status; malfuction

    I will swap ECM today but wouldn't it not run by swapping ECM? Do I have to recode the replacement ECM?
  9. TonyTouch

    06 Passat 2.0T FSI BPY engine status; malfuction

    Should I add it back on the Gateway list?
  10. TonyTouch

    06 Passat 2.0T FSI BPY engine status; malfuction

    well i will like to correct and recode the Can Gateway and hopefully i can get rid of some codes. I bought a mannual engine used mine is auto so i swapped transmission. I went to the junkyard bought an Ecm, gateway and tcm modules. I changed them but no luck so i switched them back. Car was...
  11. TonyTouch

    06 Passat 2.0T FSI BPY engine status; malfuction

    is this better? Tuesday,08,November,2022,14:33:11:10190 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64 VCDS Version: 22.9.0.0 (x64) HEX-V2 CB: 0.4623.4 Data version: 20220830 DS341.0 www.Ross-Tech.com VIN: WVWAK93C36P076949 License Plate: Chassis Type: 3C (3C0) Scan: 01...
  12. TonyTouch

    06 Passat 2.0T FSI BPY engine status; malfuction

    Ok what sould I do because this is my first time doing this.
  13. TonyTouch

    06 Passat 2.0T FSI BPY engine status; malfuction

    i replaced engine got it running but it sounds like a misfire somewhere. cleared out some codes but this wont go anywhere, Tuesday,08,November,2022,14:33:11:10190 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64 VCDS Version: 22.9.0.0 (x64) HEX-V2 CB: 0.4623.4 Data version...
Back
Top