Search results

Ok, I think that's the best option, need to reset the inspection for a year as well. Thanks for the advice.👍

Thanks for the reply. Yes that is the car I'm on about. I'd like to go variable but being 1 year in, just looking for the best option available and ideally a guide for this scenario. Is it as simple as changing over the oil quality selection?

Sorry to hi-jack this thread. My Audi TT 8s TFSI had an oil change 3/5/22 and filled with Castrol GTX 5W-30C3. Mileage was 60457 at an Audi Main Dealer Garage. Mileage now is 61532 and asking for an oil change. I understand that the GTX 5W-30 is the Long-life variant of oil. With just over a...

Just wondering how to mark a thread I created as Resolved?

Hi Uwe Traced from wiring diagrams that Pin 3 to the alarm is supplied by a 10Amp fuse in the engine bay fusebox. This fuse was missing, possibly pulled by previous owner as the old alarm horn was not working. Alarm now works fine. Thanks to everyone for their help.

Fuse F6 in the glovebox is ok. All fuses in engine bay are ok Pin 1 of the sounder socket is showing 12v Pin 2 is grounded. (Across pins 1 and 2 shows 12v). Can only assume Pin 3 is the communication channel. Would it be possible to ask if someone can list the settings/codings/adaption values...

Hi, I removed the sounder and cleared the codes, cycled the ignition and re-scanned, the same faults appeared. With the new sounder the faults are the same. Just wondering if it's actually a wiring problem? Have you by chance got a copy of the wiring diagram for the alarm system?

The tyre pressure fault was cleared afterwards. No other faults on the system apart from the two alarm records. Saturday,17,September,2022,08:55:17:32157 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 22.9.0.0 (x64) Data version: 20220830 DS341.0...

Hi everyone, :-) Car is an 8S FV 2014 2.0 Quattro S-line Coupe. Problem is with the alarm sounder not working. I can set the alarm, open the door with the third key and trigger the alarm (indicators flashing etc) but no sound from the sounder. I replaced the original sounder (5Q0 951 605)...