Search results

  1. A

    Would all 2016 Jetta models have the wiring for a backup camera installed even if they didn't come with a backup camera?

    Will do. Looked at some videos on installing the trunk handle replacement cameras and fishing the wires to the radio doesn't look too bad. Ordered one off Amazon.
  2. A

    Would all 2016 Jetta models have the wiring for a backup camera installed even if they didn't come with a backup camera?

    The 2016 Jetta I bought came with an Alpine stereo that was dead (yet someone on Ebay thought it was worth spending $200 for) so I sold it. Picked up a cheap OEM radio only to find it will cost at least another $150 to remove component protection. Will be returning that one. Bought a new cheap...
  3. A

    How to add a key to a 2010 Touareg?

    Would this video apply to getting the remote functions to work?
  4. A

    How to add a key to a 2010 Touareg?

    I used an Xhorse Mini Key Tool and their Superchip, https://www.locksmithkeyless.com/products/vvdi-mini-key-tool-remote-generator-cloner-tester https://www.locksmithkeyless.com/products/super-chip-xt27-universal-programmable-transponder-chip If I don't use keyless functions, can I program...
  5. A

    How to add a key to a 2010 Touareg?

    It came with just one original switchblade key remote and the truck has keyless access and keyless pushbutton start which work fine. I bought a new aftermarket key, cut the blade and cloned the immobilizer so I can lock and unlock it, and it will start. If that's all it can do, I'll live with it...
  6. A

    Resolved Follow up on closed thread regarding turning off seat belt warning chime.

    Well ok...........Where it says instrument panel coding +02=Seatbelt Warning Active, I guessed that -02 might make it inactive. So I changed the 0007201 to 0005201 and it worked.
  7. A

    Resolved Follow up on closed thread regarding turning off seat belt warning chime.

    I want to turn off the seatbelt chime along with the visual warning in a 2010 Touareg and doing a search I found this relevant thread: https://forums.ross-tech.com/index.php?threads/8692/ where Uwe writes, You can't turn that seatbelt warning off just for the passenger seat. However, you...
  8. A

    Is Component Protection mode an issue with aftermarket radios?

    $140 to $150 from the two that have replied back.
  9. A

    Is Component Protection mode an issue with aftermarket radios?

    Ok thanks. Not worth it to me for the $150 to $250 dealers have quoted when new aftermarket radios are under $100. I guess I'll just return this one.
  10. A

    Is Component Protection mode an issue with aftermarket radios?

    Bought a junkyard radio from a 2016 Jetta for my 2016 Jetta. Get the message, Component Protection Active. I'm learning that only a VW dealer can remove this so I can expect to pay $150 to $200 for an hour of labor, or about 4 times what I paid for the the radio. Alternatively, I can return this...
  11. A

    2010 Touareg TDI Stop/Start switch inop.

    I disconnected the switch and removed it to take apart. Found nothing obvious, just went over the internal contacts with a cleaning brush and reassembled. Plugged it in and it now works like it should. Maybe some terminal fretting on the pins of the connector? Anyway, off to order a switch...
  12. A

    2010 Touareg TDI Stop/Start switch inop.

    $30 vs. spending more than 10% of what I just paid for truck to get OE sensors? No thanks. Will put a piece of black electrical tape over the warning light first. And I just typed "Ebay", not sure why there is a link to some weird Ebay song. I didn't add that. The only thing I'm concerned about...
  13. A

    2010 Touareg TDI Stop/Start switch inop.

    Maybe my memory is off, but I recall being told not to post the whole scan line by line as it takes up so much space. Next time I'll have it directly in the thread. $25 is just to replace the broken button cover. A genuine new switch is around $150 Have a set of cheap TPMS sensors from Ebay on...
  14. A

    2010 Touareg TDI Stop/Start switch inop.

    I've also read somewhere that the Start/Stop switch can be coded out. Will I be able to tell from the scan if that is the case, and if so, how to activate it again?
  15. A

    2010 Touareg TDI Stop/Start switch inop.

    Long time no see. Picked up this Touareg recently. The remote has a new battery and the remote functions work fine as well as the keyless access. The Start/Stop button doesn't do anything when I press it. Not even a message on the dash. The illumination does work so it must be getting some...
  16. A

    Can VCDS command ECM to run readiness codes to complete?

    I was able to complete the Evap and O2 sensor monitors but not the secondary air system with VCDS. On step 19 where it says to idle until you see xxxxx100 in block 4, but nothing after 5 minutes. Current Autoscan does show two faults in Engine but they aren't emisions related so shouldn't...
  17. A

    Can VCDS command ECM to run readiness codes to complete?

    From my previous post https://forums.ross-tech.com/index.php?threads/29911/#post-251646 but that was before the battery was disconnected. Will read through that tour, thanks.
  18. A

    Can VCDS command ECM to run readiness codes to complete?

    Changed the battery on a 2005 Jetta 2.5 MKV so it cleared the memory and now I have 3 incomplete monitors. Evap system, secondary air system and O2 sensor. I drove it on two 15 mile highway rides last night with no change. Want to take it in for an emissions inspection soon. I read here...
  19. A

    2005.5 Jetta programming a used key for immobilizer

    What about cloning like shown here,
Back
Top