Search results

  1. amir_a2

    07 bentley conti gt coupe will not go in jack mode air shocks not working and some modules not responding to vcds

    I don’t know how to test the valves yet what Evers going on is only happening in the front last test I did see 3.45 bar
  2. amir_a2

    07 bentley conti gt coupe will not go in jack mode air shocks not working and some modules not responding to vcds

    I changed the strut last night and now the pump cuts on for a few mins then cuts off and front doesn’t go up at all just the back
  3. amir_a2

    07 bentley conti gt coupe will not go in jack mode air shocks not working and some modules not responding to vcds

    this was last scan after in changed front shocks and control arms now the car is farther in the ground i hear the pump cutting on but it doesnt stay on long and the car is not rising in the front the back is very high not letting me go in 08367 without fault no matter what i do...
  4. amir_a2

    07 bentley conti gt coupe will not go in jack mode air shocks not working and some modules not responding to vcds

    It’s was leveling out while driving but now the front is on the ground
  5. amir_a2

    07 bentley conti gt coupe will not go in jack mode air shocks not working and some modules not responding to vcds

    Wednesday,04,December,2024,20:11:22:34724 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 24.7.1.0 (x64) HEX-V2 CB: 0.4643.5 Data version: 20240919 DS356.3 www.Ross-Tech.com Dealer/Shop Name: studio155th VIN: SCBCR73W77C042642 License Plate: Chassis Type: 3W...
  6. amir_a2

    07 bentley conti gt coupe will not go in jack mode air shocks not working and some modules not responding to vcds

    After I drove it the raise button was blinking orange as it was raising then when I got home and parked it the right front wheel is closer to in the wheel well while the other 3 wheels are at normal height
  7. amir_a2

    07 bentley conti gt coupe will not go in jack mode air shocks not working and some modules not responding to vcds

    Read Trouble Code BENTLEY V14.90> 34 - Level Control System DTC Code 49%0 13.4V 01400 [057800] Trouble Code Descriptions Status Level Control System-Lower limit not reached passive / Sporadic
  8. amir_a2

    07 bentley conti gt coupe will not go in jack mode air shocks not working and some modules not responding to vcds

    I changed the relay with a new 40a relay and the air kicked right in and lifted the car
  9. amir_a2

    07 bentley conti gt coupe will not go in jack mode air shocks not working and some modules not responding to vcds

    i think its the relay i ran a test on pin 85 and 86 nothing comming off the coil side to activate the switch to allow the voltage to pass thru I also put a straight wire on pins 30 and 87 in the box a relay bypass and the compressor cuts on but the doesn’t lift u just hear the compressor
  10. amir_a2

    07 bentley conti gt coupe will not go in jack mode air shocks not working and some modules not responding to vcds

    Tuesday,03,December,2024,18:28:29:34724 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 24.7.1.0 (x64) HEX-V2 CB: 0.4643.5 Data version: 20240919 DS356.3 www.Ross-Tech.com VIN: SCBCR73W77C042642 License Plate: Chassis Type: 3W (3W - Bentley Continental (2004...
Back
Top