Search results

  1. NEtech

    2008 Passat VR6 4 motion. Need Coding for ABS and EPB

    I always start with a coding from same model, same engine, same gearbox. Then you change it to Hex in LCode (if not done online with VCDS) and use the 3C0-614-109-C4 label. Then compare PR codes. I have not found any Autoscan with 0096016 or 0010615.
  2. NEtech

    Audi A7 2013 engine CLAB drain battery overnight

    Start-Stop. SSP 481 page 19 and SSP 459
  3. NEtech

    2013 Touareg 7P Trailer Module Retrofit

    You can change Coding to whatever you want. One way is, in Long Coding helper > Language > Expert user Bit 7 is for original factory Trailer, with PR code 1M6/1M3. Plain text encoding, is what you did, start Long Coding helper, find the Byte with correct Trailer text.
  4. NEtech

    Can gateway fault (2019 Audi A7)

    Check measurement values in [19], use 11282 for search value. If not defective, maybe connect battery charger, Ignition ON for 2 hours. And then check measurement values again. From DTC's, it looks like the 12V Battery is not 100%
  5. NEtech

    Need help with abs coding after loosing coding.

    I don't have Autoscan from Italian models, don't know if they are different. Delete all errors, ignition OFF 1 minute, drive a trip in the car, make needed basic settings. Maybe info here.
  6. NEtech

    Need help with abs coding after loosing coding.

    You can try: 92054C3E3D4449B232FEBC1F12E111A649264D46226A244844546255454888659264B26244562412222A46AAA269D64FFD966BF2BF
  7. NEtech

    Audi C7.5 Tear drop wiping

    Try: [Long Coding Helper] -> Byte 2 Bit 5 - 1= Active 0 = Disabled
  8. NEtech

    I want an ABS code that has a tire pressure

    The car has TPMS from factory. OP, are you sure 0001568, is original ABS coding?
  9. NEtech

    Golf 7, ABS code lost (ContiMK100IPB_033_VW37; 30 bytes)

    Error 13 again? Maybe try coding without VIN and first use SA: S12345
  10. NEtech

    Golf 7, ABS code lost (ContiMK100IPB_033_VW37; 30 bytes)

    @EuroX is this the original coding for the car? If not, I would try this: 01FA62A124200972037D060941C72980462490C0608294F30062507AC102
  11. NEtech

    Security Access Code to Reset Opf soot ?

    Soot is not reset with an SA, regeneration while driving or service regeneration is decreasing soot. I guess you are trying to reset Ash, when a new particulate filter is installed. IDE07903-Adaptation of ash mass g
  12. NEtech

    Tiguan 2009 ABS coding

    Try: 0014626 Please get verified.
  13. NEtech

    2019 caddy steering assist fault

    What is the history? What are the Channel values, from [44], channel 3 6 7?
  14. NEtech

    Audi A1 2011 ABS long code missing (ESP8.2i)

    Try this Coding: 330448E9437200B4CC2512E6C2D300920C00
  15. NEtech

    Fans Running on Cold Startup

    And looking at 35 different maps, IDE00915-MAS01186 show 145 °C on all. So that seems to be standard.
  16. NEtech

    2010 Golf CJAA - DPF regen issue

    MWB 108.2 (calc.) + 108.3 (meas.) MWB 241.2 (calc.) + 241.3 (meas.)
  17. NEtech

    Drive Assist and Hill Assist Issues on VW T6.1 California

    Show these data from [03-ABS] IDE02270-IDE02713 All IDE04422
  18. NEtech

    Audi A7 4K Brake system upgrade (ESP 9 Premium coding)

    Where is Akebono used? Cars I have for 0x50 is this: LC,00,2~7,50,= Brakes [PR-1LV+2ED] / [1LM+1KP/1KY] 440x40mm / 370x30mm The OP asked for "from 350mm to 400mm akebono and rear from 330 to 350mm" So as I see it, 400mm and 350 is not 0x50 ?
  19. NEtech

    Latest LCode version

    Test version 2.1.14.0 download here. For new 200 Byte Audi 2024+ [09] Coding. If standalone (not from VCDS), one can press Ctrl V with the 200 Byte Coding, after LCode is started. Or start LCode, when 200 Byte Coding is in Windows paste buffer, as normal. {2.1.14.0 - 13.Jan.2025} {Now remove...
  20. NEtech

    PROBLEM with SECURITY CODE IN Address 44: Steering Assist A3 8P

    ? Not replaced because of No Coding. Replaced because of Defective DTC, yes probably.
Back
Top