Search results

  1. G

    2015 Polo Japan - Missing ROD for Instruments

    Fixed, had to read eeprom and correct the corrupt entry. Still didnt help matters as the adaptation channels for unit measurements for speed are locked anyway and cannot be changed :facepalm: Interesting though as ODIS uses a basic map for the adaptations when it cannot find the correct ROD...
  2. G

    2015 Polo Japan - Missing ROD for Instruments

    Ah ok I did the initial scan on the customers car at location and now its been dropped off to me to convert from jp to eu. No idea what theyve done in that interim period. Maybe they had someone else try to code it? I can see its been opened up as it now has a mph dials. Solution is new cluster?
  3. G

    2015 Polo Japan - Missing ROD for Instruments

    Hi chaps Get missing ROD for 17 Instruments, trying to do adaptation and it cannot find a correct file Seems something is corrupt in the cluster maybe, but its functions fine with no fault codes. Any way around this please? Can we redirect to a working ROD? Thanks...
  4. G

    VW Up Japan spec - security access for instruments

    HI chaps Japanese spec Up Trying to change adaptation of Units in 17 from KM to MIles Controller accepts value but nothing changes Assuming it needs security access? Already tried 20103 25327 47115 Anyone know the correct security code for this variant of cluster? Thanks...
  5. G

    Taycan / e-Tron GT crash data (HV Battery)

    Hi buddy have you got the part number you replaced on the 8C HV Battery? Your scan shows 9J1 915 234 AA is the module. BUt can this be repaired or does it have to be replaced? Normally you cannot buy this seperately and have to replace the whole isolator which sits on top of the battery Thanks
  6. G

    Audi E-Tron GT -23 reset of reversible crash shut-off

    Hi how did you reverse the shutoff please. Same issue here in a ETRON GT. Thanks
  7. G

    Audi TT Cabriolet mk3 - SDS system disabled

    HI chaps Have a TT cab here with SDS speech system disabled SOmeone has updated maps and done some bits of coding and broken it So far: Reinstalled the 5F update 5098 Activated Navigation Redid maps. Checked Byte 24 on 5F and SDS is on. No joy Any ideas? Thanks...
  8. G

    Audi A3 8Y - Where is 4B Multifunction ?

    Hey chaps have headlights issues on this 2020 8Y A3 4B seems to be missing completely! Does anyone know where this sits and is located on a RHD Audi A3 2020? ETKA gives no clue. All fuses and power is OK. Potentially from other scans here I think it needs a 4B like the following: Address...
  9. G

    Aftermarket rvc mysterious install

    Hi Was this ever resolved? I have another one with a similar situation with RVC only working on reboot Thanks
  10. G

    Resolved 2019 Audi A1 - Pre Sense Drive train fault

    Fixed. Radar sensor replaced.
  11. G

    Resolved 2011 Audi Q5 - Shorted Battery terminals

    Fixed. 46 BCM2 replaced. Authorisation requested as these have immo in BCM2. Coded and fitted. Everything else resolved itself.
  12. G

    Resolved 2011 Audi Q5 - Shorted Battery terminals

    Apparently a screwdriver made contact with Plus and Minus battery terminals together, with the battery connected. Piro fuse did not blow though. But I can see the BCM2 serial number corrupt and all coding lost so presume its taken a hit
  13. G

    Resolved 2011 Audi Q5 - Shorted Battery terminals

    Hi chaps. have a Q5 here where the battery has been replaced but has been shorted in the process. Lots of faults now on the car Have checked fuses. all appear OK. Although comms are still there to all modules, Im thinking 09 BCM 1 and 46 BCM2 which also includes 05 Access auth will need...
  14. G

    Resolved 2019 Audi A1 - Pre Sense Drive train fault

    Hey Chaps Interesting one, keep getting a drive train fault with pre sense. VCDS Scan here Friday,03,May,2024,18:00:06:10550 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 24.5.0.0 (x64) HEX-NET2 CB: 0.4643.5 Data version: 20240429 DS355.0 www.Ross-Tech.com...
  15. G

    2018 Seat Alhambra - How to force ABS to lose coding

    Yes it completes basic settings successfully. But faults still remain. So thats why Im thinking restart from scratch with coding and SVM
  16. G

    2018 Seat Alhambra - How to force ABS to lose coding

    Hey chaps Interesting issue with this one, ABS pump has been replaced previously elsewhere. Start Stop is causing an error, and cannot set the Brake pressure basic setting. Advance measurements show brake switch is correctly working and brake pressure is -1bar to 160bar. We want to now: Check...
  17. G

    2017 Audi TTS - CJXG - 2.0TFSI Misfires and rough idle

    Update: Genuine magnets fitted Cam tests carried out in basic settings now we getting: IDE00182 - Camshaft adaptation intake bank 1: phase position = 1.5 degrees IDE00184 - Camshaft adaptation exhaust bank 1: phase position = -0.7 degrees No faults so far.
  18. G

    2017 Audi TTS - CJXG - 2.0TFSI Misfires and rough idle

    Havent got round to compression test But so far IDE00182 - Camshaft adaptation intake bank 1: phase position = 1.1 degrees IDE00184 - Camshaft adaptation exhaust bank 1: phase position = -0.3 degrees Changed both cam magnets 06L109259D Checked the cam control valves behind the magnets and all...
  19. G

    Seat Leon from hell , 2009 1.4 TSI CAXC , G79 problems

    I have same issue today with a Scirroco 2011 - 2.0TFSI Limp mode with P2122 Throttle Low circuit Customer changed throttle pedal, throttle pedal wiring, throttle body, readapations. Still goes limp Advised him to change battery and report back. Next thing to tackle will be ECU. Simple...
Back
Top