Search results

  1. M

    VW T6 halogen rear fuel foglight coding / LED Canbus cancelling

    As above, Can anyone tell me the security access code and what to change to enable duel rear foglights on a 2017 VW transporter please? Is it also possible to cancel the Canbus error for LED headlight bulbs? Monday,02,December,2024,08:50:24:34356 VCDS -- Windows Based VAG/VAS Emulator Running...
  2. M

    Audi A3 8P 2009 1.9TDI 105PS Dead dash / clocks / car starts and drives

    As the title says, car starts and drives but all lights on the dash stay on, the clocks do not work so you cannot see speed and RPM and all the other things like fuel and temp or mileage, the MAXIDOT does not work either. I ran VCDS through it and after saving the logs a few times and deleting...
  3. M

    2016 Mk3 Fabia - enable dual rear fog lights

    I certainly do know why, braking and the ease of distinguishing. I can also confirm that having two is not a TUV failure, I guess it may be if you don't have the third centre high rise brake light but this and most cars that have both fogs enabled do have this and also pass TUV with flying...
  4. M

    2016 Mk3 Fabia - enable dual rear fog lights

    Hello all, I am trying to activate both rear fogs for a friend who has a 2016 Skoda Fabia Mk3, I can see that the fogs are duel filament halogen bulbs. Due to a back injury and issues bending I am unable to check if there is wiring on the rear left to support the activation of both and don't...
  5. M

    VW Polo 9N3 Output Test List

    That I have not! Although I did manage to activate the horn, much to the disgust of my German neighbours as it was Sunday 🤣
  6. M

    VW Polo 9N3 Output Test List

    I will do that. Yes, I think you’re right, there’s an expected discrepancy in terms of actual temperature and displayed due to the calibration margin. Is there a way to just say, change the idle to 2500 rpm in VCDS?
  7. M

    VW Polo 9N3 Output Test List

    When I went to Engine output tests there was only two I could cycle through. In HVAC there was one, an aircon test. It’s the first time I’d used that feature today, I might get more used to it on my 2016 Octavia but one things for sure, this Polo didn’t allow me to test what I wanted to, the...
  8. M

    VW Polo 9N3 Output Test List

    No, I’m not. I was informed it was 85 & 95 degrees for the low and high. Hopefully a test drive irons the issue out.
  9. M

    VW Polo 9N3 Output Test List

    Thanks for the reply! The low speed comes on with the air con. I have bridged the connection on both the coolant temp sensor plug and also direct to the fan. On the coolant temp sensor plug the low speed works but I can’t get the high speed to come on. Taking 12v and ground from the battery I...
  10. M

    VW Polo 9N3 Output Test List

    There you go :) Sunday,24,July,2022,19:11:48:34356 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version: 22.3.1.4 (x64) HEX-V2 CB: 0.4615.4 Data version: 20220407 DS337.0 www.Ross-Tech.com VIN: WVWZZZ9NZ9Y234447 License Plate: JESSY POLO Mileage: 106150km-65958mi...
  11. M

    VW Polo 9N3 Output Test List

    Hello all, Does anyone have a list of available Output Tests for a 2009 Polo 9N3 1.2? I would like to test the low speed and high speed fans, I know the fan is working, I just want to check the J279 fan control module / relay is doing its job and activating them. Thanks 👍🏽
  12. M

    RHD Seat Ibiza 6J xenon headlights - to LHD TRAVEL MODE

    You can ‘hijack’, ‘post’, do what you like on this thread so long as it helps you my friend! Ironically I just finished doing the rear lights on that Seat Ibiza tonight, what a PITA!! De pinning connectors, crossover cables and lots of swearing. Did it though. With the infotainment system, the...
  13. M

    RHD Seat Ibiza 6J xenon headlights - to LHD TRAVEL MODE

    Legend! Many thanks, hopefully this works as if not it’s going to be expensive. 🙂
  14. M

    RHD Seat Ibiza 6J xenon headlights - to LHD TRAVEL MODE

    Dear knowledgeable VCDS experts, I was hoping to find travel mode in the infotainment system like on my 2016 Skoda Octavia VRS on my friends Seat Ibiza FR 6J. It wasn't there. I have found through Google that travel mode is possible to activate via this wonderful software I thankfully paid for...
  15. M

    Golf Mk 5 1K ECU / Key transponder / Speedo swap coding

    Yeah there was a few. Actually managed to get the car started by changing the comfort settings so all is well. Thank you 🙂
  16. M

    Golf Mk 5 1K ECU / Key transponder / Speedo swap coding

    Thanks for the reply Uwe. I stupidLt forgot that the VIN would be in the ECU and and not as per the windshield. No it won’t start at all. I will do as you say and get back to you on that. Thank you!
  17. M

    Golf Mk 5 1K ECU / Key transponder / Speedo swap coding

    Evening all, I have been asked to help someone who has swapped their speedo, ECU and the transponders in their keys over because the ECU had water damage. Can anyone send point me in the right direction as to what needs to be coded. I have not long had VCDS and have coded a few things on my...
  18. M

    2014 Audi S3 issues

    A Agreed, I’ve seen some real horror stories about complete rear diff assemblies being replaced or pumps being replaced and no learn functions being carried out afterwards.
  19. M

    2014 Audi S3 issues

    So, a little update. Tonight my friend came with the offending 360bhp Audi S3 complete with a brand new genuine Borg Warner Gen 5 Haldex pump and a Bosch ABS sensor. I dropped the brand new fluid I put in a month or so back after the clean out which contained a little crap that hadn’t been...
  20. M

    2014 Audi S3 issues

    It takes about 600ml of fluid and then once you’ve got to temp and done the pump learn takes another 100ml or so. Fluid for the Gen 5 is G060175A2. Hope that helps and sorry for the late reply.
Back
Top