Search results

  1. T

    2012 JSW J519 issues

    OK perfect, thanks so much for your assistance you guys!
  2. T

    2012 JSW J519 issues

    Cat does start and run, I think that’s why I was assuming I could get the lock/unlock with done coding, since it seems to recognize the key.
  3. T

    2012 JSW J519 issues

    Gotcha. Thank you. Do you have any idea what exact verbiage I should use with the dealer? They’re inept. I had the car there prior AB’s they never even figured out the BCM was the issue, told me to buy a key and I’d that wasn’t the problem to buy the BCM. They just play “parts darts”. Even told...
  4. T

    2012 JSW J519 issues

    So I have tried following this: http://wiki.ross-tech.com/wiki/index.php/Immobilizer_IV_Key_Matching This is what I see in VCDS: As well as this: https://www.ross-tech.com/vag-com/cars/vw-remote-matching.html This is what happens when I try this one and couldn't follow those directions in the...
  5. T

    2012 JSW J519 issues

    OK bought a used BCM after following advice on here about part numbers. Copied all the coding info and pasted it over. Worked perfectly, thank you! Everything is working now except for the key fob which will not lock/unlock the doors. Interesting to note: I used to have to put the fob against...
  6. T

    2012 JSW J519 issues

    Here’s the BCM lol. Figured it out I guess. Part number ends in “G”. If I’m coding it anyway do I have to use save exact part number? Not many “G”s around. Plenty of other ones with same look and connector layout.
  7. T

    2012 JSW J519 issues

    I’m going to check this over the weekend. If it works, great. If not I was going to try replacing the module with the same part number, but I might need a little help cloning it to the car. Do these modules go bad often or is this due to the alleged water damage I feel in going to encounter...
  8. T

    2012 JSW J519 issues

    I also tried to operate my washer pump with the VCDS controller and the message came back saying "Refused by control module". That's it for now, sorry about the messy bottom, tried posting photo and it didn't work.
  9. T

    2012 JSW J519 issues

    Hello everyone, First real post for help here so please forgive any transgressions in etiquette. I am open to feedback about post quality! So as title says this is for my 2012 JSW. Been chasing demons for a bit and hooked up VCDS today and as suspected I believe my J518 BCM has gotten wet with...
  10. T

    Is there a way to determine who’s tune is on my car?

    OK cool thanks for the reply! Am I correct in assuming the EGR system is no longer functioning at all? I’d like to remove the coolant lines and both the high and low pressure systems and add block plates just to keep the intake clean but in afraid to have it freak out if something is still...
  11. T

    Is there a way to determine who’s tune is on my car?

    Here is my Autoscan I hope: Saturday,27,April,2024,23:15:33:19527 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 23.11.0.0 (x64) HEX-V2 CB: 0.4643.4 Data version: 20240322 DS351.0 www.Ross-Tech.com VIN: WVWDM7AJ0CW160483 License Plate: Chassis Type...
  12. T

    Is there a way to determine who’s tune is on my car?

    Bought this car about a month ago 2012 Golf TDI, and I know it’s tuned, just can’t figure out who’s time and which mood were applied. I’d there a way to do that with vcds? I’m assuming this means the EGR has been deleted with the time as it is still physically on the car? “Exhaust Gas...
Back
Top