Search results

Sorry for the slow response this is 4 cars down and the least important on my to do list The test screen says: Vcds release 23.3.1:port test Interface: found Type HEX V2 Version: CB: 0.4631.4 FW:P 0.256 Status: ready Can: OK, K1: OK k2: OK VBAT: 12.39V VLGN: 0.02V Vin(s) used: 1/3 This is...

Port status OK interface found.

Once again I am having fits with my vcds, Have it connected to the car 2007 Beetle code 1Y, and it will not read anything. It will do a scan, only codes are airbag which I knew. I replaced the clockspring and am trying to time the steering wheel and it will not connect. I am sure that I am...

I am second generation out of southern Germany on both sides. Fortunately for me my parents moved out of the German community they grew up in and settled in So Cal. As a result I grew up with minimal German influence, A fact I thank God for more and more the longer I live. The short story on the...

I have a 00778 steering angle sensor code. Very long story but I disconnected the steering when I dropped out the K member and apparently got the steering shaft out of time. For the life of me I cannot find how to get to the place on my ross-tech that shows the sensor position so I can pull the...

I have not plugged in my ross-tech in years and now need it desperately for my granddaughters beetle. It says vcds software out of date, firmware update recommended and something else, I believe interface not found. I tried doing an update to no avail and my computer skills are about a point 0.1...

Got my certificates and completed the registration. All is well. Even though the module did not set any codes the VCDS did point me in the right direction to diagnose the problem. It did require some old school search and diagnosis though. The VCDS seems to be invaluable in diagnosing anything...

Yes you just need to go beyond the instructions and ferret it out. We will find out Friday at 1:00 if I get my brake and light certificate, If so hopefully all will be well for a while.

The up down keys only toggle between 1 and 2. However if you go to the drop down menu and click on steering angle sensor? it takes you to 60. Once I got past that and fumbled my way through the rest of the directions (which are also not totally accurate) all the lights on the dash except for the...

Went to 03 put in 40168 it took code. Went to basic settings and there is no group 060. group 001 shows nothing group 002 is not available.

Here is the scan after clearing all the DTCs that would clear. It does have the replacement ABS module installed. Tuesday,13,July,2021,10:45:15:28321 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 21.3.0.0 (x64) HEX-V2 CB: 0.4544.4 Data version: 20210226...

The autoscan was with the old module connected. The present codes are 00778 and 005. I tried cancelling them before the auto scan and they instantly reappeared. They are the only codes I am aware of unless you see something I don't. As for copying the coding that is my problem. I do not know...

I am trying to get a 2007 Beetle on the road for my granddaughter. I needed a brake and light inspection and there were no codes and everything passed until the technician pulled the cart up to the office and when he stopped the ABS module triggered momentarily so he failed it. I connected the...