Search results

Yes, it's definitely possible, I was able to cross-flash my VC from 5G1920795A / 3194 to 5G1920794B / 4193 -- using .odx file and ODIS-E 17.0.1, it takes 9 hours. I first tried the SD card method, but it didn't work because of the different part number.

Ok, I had hopes because the RPM works, GTE mode/icon is displayed correctly, while all those are still not present in e-Golf cars. Can it also be a hardware problem, that the wires are in a different pin? Do you have access to Elsa and know where to check the differences please? Thank you!

I have those activated already, otherwise I could not see the "energy flow" screen on the MIB. Also e-Manager works. I really think this button was taken out of the UI in MK7.5, see the stock examples above. ;SW:5NA-035-042-A HW:5NA-035-042 --- Information Electr. ;Component:MU-H-LN-EU...

It's MIB2.5: SW train version: MHI2_ER_VWG13_K4525 SW MU version: 1367 Part number: 5NA035042A I'm also attaching the admap, maybe there is something I'm missing. Even tho the AID is from e-golf, it displays GTE graphics, shows fuel indicator (but stays at 0) and also RPM works, which would...

Yes, linked here.

After some discussions with @downtime (thank you for guidance!), I managed to get the MIB2.5 error-free and coded properly. I did some more retrofits which might or might have not contributed: flashed A5 front camera from 5Q0 980 653 F to 5Q0 980 653 G + uploaded dataset (fixed 2555904 /...

Can anybody say anything about cross flashing from 795 A (e-golf) to 794 A (GTE)? Is it possible/working via SD? I have the files needed, but I get some errors when try to flash them, I guess it would work if it would've been just a normal upgrade. Error: file access Error code: 15, Detail: 2...

Well, I kinda have the same situation, but after a retrofit of AID on Golf 7 GTE hybrid. I picked up an used cluster 5G1 920 795 A that seems to be from an e-golf and fuel level is not working now. Are there hardware differences? Coding maybe? or should I flash the firmware to 794 A?

So can we guess what the updated firmware was? Most likely in Address 13: Auto Dist. Reg (J428) / Part No SW: 5Q0 907 572 F HW: 5Q0 907 572 F? I have the same error after MIB2.5 retrofit + A5 camera flash to 5Q0 980 653 G (had 653 F before) The difference is that my ACC is older: Address...

Thank you for confirming, that is what I was assuming. Can you please share the secret how? Is it the removal of the instruments and ECU fuse & manually entering the VIN of a car that had that gateway part number?

just tried it, still does not fix the error. Also, I actually have an USB hub, the last type D with 3 USB ports and carplay support (works). Indeed, this is another story, I've bough a new gateway for EV platform, 3Q... 530 AC, removed component protection online with ODIS, but when trying to...

Yes, I actually tried that, coding accepted, but the error is still there. I have gathered some similar codings from the forum, pasting it here for reference, but I did not manage to make the Incorrect coding dissapear. 02737001FF0000005111000100080A901F010CD4012005009F my coding...

Anybody? Please help, my retrofitter is out of ideas 🙂

Well, I think I might have all the FEC codes activated in it "on the bench", so that might work, even tho not sure if I would use the SIM, ever. Sorted the 47 Sound System - missing in gateway with help from Uwe here, it was just one Adaptation channel. I've also enabled the e-Displays and...

Yes! That was it, one thing sorted, thank you! Address 5F,5NA 035 042 A,channel IDE01996-MAS00847-Installation list: specified installations-Digital Sound System Control Module,adapted from,Yes ,to,No ,Thursday,07,September,2023,22:20:20:58756

Internal is set already, MIB2 unit does not have DAB, optical bus is disabled now (error is gone). The telephone craddle is actually the cellular antenna for the MIB data SIM card which is not installed yet. My 5F module does not even have 27 bytes long coding, only 24, so I'm not sure that...

I actually have the opposite problem, never had Dynaudio on my car, but retrofitted MIB2.5 from a car that had it. Now my GVL does not have 47 checked, but the 5F somehow announces it and it shows up on autoscan list as: @Eric should I also send the debug logs to support? Or is it just an...

Sooo, today I've got the sound profiles flashed, sound is way better now, but the errors are exactly like before. can I get some help with how to sort them up? My retrofitter is out of ideas unfortunately and those bytes in long coding (Byte_Coding_Condition 10-27) are not fully documented so...

We want to support you, obviously 🙂 Romania is doing a lot of harm with the clones already, so... a drop in the ocean. Perfect! I love "free" merchandise!

Thanks for the tip, just ordered from Auto-Intern, Aspad in Romania doesn't seem to have it. PS: hope it has a nice Ross-Tech imprint, otherwise it's a very expensive USB cable 😁