Search results

  1. bobster

    2006 GLI, BPY/6MT P3193, P0300, P0301, 2, 3, 4 and having trouble with intake runner readiness...

    2006 GLI, BPY/6MT P3193, P0300, P0301, 2, 3, 4 and having trouble with intake runner readiness... 244k miles, 170PSI compression all cylinders, fairly new plugs/coils, tons of new stuff: timing belt/tensioners/w-pump, cam chain/tensioner, t-stat, PCV/hoses/oil cooler adapter, inj. seals, vc...
  2. bobster

    Resolved 2007 EOS Base 6MT Central Electric Module Coding Concern

    UPDATE: solved... I fingered it out myself, thank you? ;) In the "Long Coding Helper" I allowed VCDS to enter the "default" values by clicking "yes" (12345, etc), and I now have footwell lights. Well I have ONE :rolleyes: and need to get a bulb or housing/bulb from the junk yard next time I am...
  3. bobster

    Advice on weaponry

    PS: regarding other ammo you may have, there will ALWAYS be someone local willing to buy it from you at a reduced rate. There may be a local "gun trader" or "armslist" page you can advertise on. Meet the buyer in the parking lot of a local convenience store or police station or similar public...
  4. bobster

    Advice on weaponry

    From here those boxes look fine which means the cartridges are probably fine inside with no corrosion or water damage. Old ammo from the safe or closet is generally GTG. I perhaps wouldn't count on it for self-defense, but it should run through either of your pistols fine. I've shot surplus 75...
  5. bobster

    Resolved 2007 EOS Base 6MT Central Electric Module Coding Concern

    2007 EOS Base 6MT Central Electric Module Coding Concern. I don't know if this question belongs here but it might apply as I used a Central Convenience Module (46) from a 2007 GTI that was the EXACT part number to replace the original(?). The original CCM was dead with a "Cannot Be Reached"...
  6. bobster

    Advice on weaponry

    My $.02: Baldwin is guilty of negligent manslaughter. Slimedia trying to give him a pass calling it a "prop" gun but it was a REAL gun. He violated several rules of gun safety but appears they have found a few scapegoats to blame... :(
  7. bobster

    Advice on weaponry

    For your next AR builds... :)
  8. bobster

    2007 EOS, 2.0t/DSG-6spd, unknown code: 17252 - P0868 - 001 "Trans. Fluid Pressure Adaptation at Limit"

    Let me rephrase that: "lesser known". ;) It didn't show up in the code list here and only gave 2 or 3 inconclusive search hits. Already have the basic setting sheet printed out, thanks. Maybe when I get a set of keys I'll work on it... :rolleyes:
  9. bobster

    2007 EOS, 2.0t/DSG-6spd, unknown code: 17252 - P0868 - 001 "Trans. Fluid Pressure Adaptation at Limit"

    A family friend I would even call a "nephew" bugged me to sell him this car. 2007 EOS, 2.0t FSI/BPY with 6-speed DSG. A thou or two over 100k miles from an older original owner who had become ill and was not able to maintain the car but did take care of it up until that point. Then it got...
  10. bobster

    Can 07 R32 Climatronic unit be programmed for 07 EOS?

    Can a 2007 R32 Climatronic unit be programmed for a 2007 EOS? OR is non-compatible? OR is it defective? The original Clim unit in the EOS was dead, no communication, no A/C, no blower function. Replaced with a "test" unit out of same year EOS but the LCDs are roasted by sun/rain and not...
  11. bobster

    Time for a Comfort Control Module? (no comm at 46)

    Time for a Comfort/Convenience Control Module? (no comm at 46) J393 2007 EOS, 2.0t/6MT FSI (BPY), 122k miles, base model? w/climatronic. Running/driving parts car that I would like to get on the road but NOT W/O A/C! :eek: A whole plethora of codes, after clearing and rescan from letting the...
Back
Top