Search results

Just to be clear, when the original BCM was water damaged in the vehicle, I planned to upgrade it and add the RLS, Anti dazzle rearview and the European Auto headlight switch with rear foglight capabilities. The sole purpose of this post was because I had no foglights, no other reason. I...

2kaa52: Yes 087 BCM is a Highline Version that has all available Options. 086 BCM is also Safe to Work with Front Fog Lights. Check your 084, there are No Pins in the Connector for Front Fog Lights. ...Thanks... I errored with that eBay purchase, assuming that the R model would have a highline BCM.

Understood. 👍 Thanks

Do we know if there was a Golf R variant with out headlights?

1K0 937 086 P is part # for the original BCM (TDI), It had water damage from faulty sunroof drainage. The current BCM in vehicle was purchased on ebay, listed from a Golf R, assumed it was high line. I will attempt to make contact with the seller. Thanks all for direction...

Front fogs

Updated full scan Sunday,17,November,2024,13:06:09:39494 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86 VCDS Version: 24.7.1.0 Data version: 20240919 DS356.3 www.Ross-Tech.com Workshop Code: 444 08310 000118 VIN: WVWBM7AJ8CW283276 License Plate: Mileage: 119200km-74067mi...

Post BCM swap

Update: Swapped out E1 with another know working unit... No luck Is it possible that the BCM although showing fog light capabilities is not programmed for foglight functions?

Below is Scan from October when I had seat airbag sensor issue, (🙄unplugged connector). VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86 VCDS Version: 24.7.1.0 Data version: 20240919 DS356.3 www.Ross-Tech.com Workshop Code: 444 08310 000118 VIN: WVWBM7AJ8CW283276 License...

Lol.

Hello All, With guidance from memebers on the group, I've recently corrected a no start issue I was having with my MK6 Golf TDI. Part of the remedy to correct the no start issue was replacing the BCM. I recently noticed however that the fog lights are inoperable. I have continuity from the...

So... I'm somewhat embarrassed to post this, one of the seat belt connectors was not totally connected at its terminal under the seat. As i was about to initiate the ohm out process i realized that a yellow connector only appeared to be inserted properly, however a quick tug proved different...

Sir. I just noticed I misspelled removal in the heading 😐, how do I edit that? Status quo on the PODS trouble codes. Gonna do some pinning out this weekend; perhaps there's an open somewhere in the harness... Thanks!

Yes sir, weird.

Hello All, Looking for a little assistance with a dreaded PODS issue. I removed my seats to give the vehicle a proper cleaning and upon reinstalling them the SRS MILis illuminated. I followed the instructions utilizing Basic Settings, and it appeared as if the process had. been completed...

Just my luck. The vehicle has KESSY functionality, and no channel 01 address in BCM/ Adaptation.

👍

***Resolved*** Got her started. Thanks to all who assisted. This particular no start issue was 2 fold. Bad BCM Bad Starter My only task is to program the remote to BCM...

Initially, I was chasing an electrical issue, as the BCM failed due to failed IC... water damage. It now appears as if the starter has also STB. I'll swap the starter out this weekend and advise. There is constant 12v at the starter & 12v at the olenoid when start button depressed, also...